Publikationen - Publications
Es wurden 340 Publikationen gefunden
-
Untersuchung zur Auslegungsmethodik von sCO2-Kreisläufen in Abhängigkeit von Verdichter- und KreislaufauslegungsparameternDuisburg, Essen (2023) XIII, 110 BlätterOnline Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Selected papers from the 4th European Conference on Supercritical CO₂ for Energy SystemsIn: Energy: the international journal Jg. 263 (2023) Nr. Part B, 125780Online Volltext: dx.doi.org/
-
The potential of CO2-Plume Geothermal (CPG) Systems for CO2 component manufacturers : Opportunities and development needs
7th International Seminar on ORC Power Systems: 4 - 6 September 2023; Seville, Spain,Seville, Spain (2023) -
Further development of a through-flow program by considering real gas equation of stateIn: Conference Proceedings of the 5th European sCO2 Conference 2023 / Brillert, Dieter; 5th European sCO2 Conference for Energy Systems : March 14-16, 2023, Prague, Czech Republic / sCO2-Flex Project (Hrsg.) 2023, S. 58 - 65Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
PDA Laser Measurements of Droplet-Laden Flows ina Four-Stage Axial CompressorIn: Journal of Turbomachinery Jg. 145 (2023) Nr. 2, 021013Online Volltext: dx.doi.org/
-
Reduction of Mechanical Stresses in Centrifugal Compressor Impellers for Hydrogen ApplicationsIn: 15th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics / 15th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics ; ETC15 ; 24 - 28 April 2023, Budapest, Hungary / European Turbomachinery Society (Hrsg.) 2023 ETC2023-109Online Volltext: dx.doi.org/ (Open Access)
-
An Euler-Based Throughflow Approach for Axial CompressorsIn: Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition (GT 2023) / ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition (GT 2023): Boston, USA; 26 - 30 June 2023 Jg. 13C 2023 v13ct32a013Online Volltext: dx.doi.org/
-
Acoustoelastic Modes in a Rotor-Cavity System With Superposed Through FlowIn: Proceedings of the ASME Turbo Expo : Turbomachinery Technical Conference and Exposition (GT 2023): Volume 11A: Structures and Dynamics - Aerodynamics Excitation and Damping; Bearing and Seal Dynamics / ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition "Power for Land, Sea, ans Air", 26-30 June 2023, Boston / American Society of Mechanical Engineers (Hrsg.) 2023 V11AT21A007Online Volltext: dx.doi.org/
-
Investigation of the Applicability of Methods Approved for Steam to the Design of Labyrinth Seals in Turbines Operated With CO2 in Supercritical StateIn: Proceedings of ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition (GT 2023): Volume 12: Supercritical CO2 2023 v012t28a011Online Volltext: dx.doi.org/
-
Simulation, analysis and control of a self-propelling heat removal system using supercritical CO₂ under varying boundary conditionsIn: Energy: the international journal Jg. 247 (2022) 123500Online Volltext: dx.doi.org/ (Open Access)
-
Surrogate Models for the Prediction of Damping Ratios in Coupled Acoustoelastic Rotor-Cavity SystemsIn: Journal of Engineering for Gas Turbines and Power Jg. 144 (2022) Nr. 8, 081002Online Volltext: dx.doi.org/
-
Acoustoelastic Modes in Rotor-Cavity Systems : An Overview on Frequency Shift Effects Supported with MeasurementsIn: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 7 (2022) Nr. 2, 15Online Volltext: dx.doi.org/ (Open Access)
-
Numerical simulation of real gas one-component two-phase flow using a Roe-based schemeIn: Computers & Fluids Jg. 245 (2022) 105560Online Volltext: dx.doi.org/
-
Turbomachine Operation with Magnetic Bearings in Supercritical Carbon Dioxide EnvironmentIn: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 7 (2022) Nr. 2, 18Online Volltext: dx.doi.org/ (Open Access)
-
Experimental Validation of an Analytical Condensation Model for Application in Steam Turbine DesignIn: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 7 (2022) Nr. 1, 9Online Volltext: dx.doi.org/ (Open Access)
-
Hydrogen Compression : Towards a New Strategy for the Design of Hydrogen CompressorsIn: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 10B: Turbomachinery — Axial Flow Turbine Aerodynamics; Deposition, Erosion, Fouling, and Icing; Radial Turbomachinery Aerodynamics / SME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022), June 13-17, 2022, Rotterdam, The Netherlands 2022 V10BT35A001Online Volltext: dx.doi.org/
-
An Euler-Based Throughflow Approach for Centrifugal Compressors : Part A: Extension and Modifications of ModelsIn: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 7: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Microturbines, Turbochargers, and Small Turbomachines; Oil & Gas Applications / 67. ASME Turbo Expo, June 13-17, 2022, Rotterdam, The Netherlands 2022 V007T19A007Online Volltext: dx.doi.org/
-
An Euler-Based Throughflow Approach for Centrifugal Compressors : Part B: Experimental Investigations and ValidationIn: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 7: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Microturbines, Turbochargers, and Small Turbomachines; Oil & Gas Applications / 67. ASME Turbo Expo, June 13-17, 2022, Rotterdam, The Netherlands; International Gas Turbine Institute 2022 V007T19A006Online Volltext: dx.doi.org/
-
PDA Laser Measurements of Droplet-Laden Flows in a Four Stage Axial CompressorIn: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics / 67. ASME Turbo Expo, June 13-17, 2022, Rotterdam, The Netherlands 2022 V10AT29A007Online Volltext: dx.doi.org/
-
Vortex-Generators Reduce the Dynamic Axial Forces in the Model of a Steam Turbine Control ValveIn: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 2: Coal, Biomass, Hydrogen, and Alternative Fuels; Controls, Diagnostics, and Instrumentation; Steam Turbine / 67. ASME Turbo Expo, June 13-17, 2022, Rotterdam, The Netherlands 2022 V002T20A007Online Volltext: dx.doi.org/
-
Experimental Data of Supercritical Carbon Dioxide (sCO₂) Compressor at Various Fluid StatesIn: Journal of Engineering for Gas Turbines and Power Jg. 144 (2022) Nr. 4, 041012Online Volltext: dx.doi.org/ (Open Access)
-
A Novel Test Rig Using Air for Investigation of Vibration and Interaction of Two Steam Turbine Control ValvesIn: Journal of Engineering for Gas Turbines and Power Jg. 144 (2022) Nr. 1, 011026Online Volltext: dx.doi.org/
-
Experimental Data of Supercritical Carbon Dioxide (sCO2) Compressor at Various Fluid States - Supplementary Data(2021) 7.49 MBOnline Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Trade and capital flows: Substitutes or complements? : An empirical investigationIn: Review of International Economics Jg. 29 (2021) Nr. 3, S. 573 - 589Online Volltext: dx.doi.org/ (Open Access)
-
Experimental damping behavior of strongly coupled structure and acoustic modes of a rotating disk with side cavitiesIn: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 9A: Structures and Dynamics - Aerodynamics Excitation and Damping; Bearing and Seal Dynamics; Emerging Methods in Design and Engineering / GT 2021, Virtual, Online, 7 - 11 June 2021 2021 V09AT23A004Online Volltext: dx.doi.org/
-
Impact of volumetric system design on compressor inlet conditions in supercritical CO2 cyclesIn: Journal of the Global Power and Propulsion Society / Global Power and Propulsion Society (GPPS) (Hrsg.) Jg. 5 (2021) S. 104 - 110Online Volltext: dx.doi.org/ (Open Access)
-
Experimental studies on dry gas seals with time-resolved film thickness measurementsIn: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 9A: Structures and Dynamics - Aerodynamics Excitation and Damping; Bearing and Seal Dynamics; Emerging Methods in Design and Engineering / GT 2021, Virtual, Online, 7 - 11 June 2021 2021 V09AT24A003Online Volltext: dx.doi.org/
-
A novel test rig using air for investigation of vibration and interaction of two steam turbine control valvesIn: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 8: Oil and Gas Applications; Steam Turbine / GT 2021, Virtual, Online, 7 - 11 June 2021 2021 V008T22A004Online Volltext: dx.doi.org/
-
Experimental investigation of centrifugal flow in rotor–stator cavities at high reynolds numbers > 10⁸In: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 6 (2021) Nr. 2, 13Online Volltext: dx.doi.org/ (Open Access)
-
Experimentelle und numerische Untersuchungen des Einsatzes von Materialien mit definierten Durchlässigkeitsbeiwerten und deren Verteilung in aerostatisch wirkenden GasdichtungenDuisburg, Essen (2021) vii, II-XXI, 150 SeitenOnline Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Evaluation of performance gain by interstage injection in a four-stage axial compressorIn: ASME Turbo Expo 2021: Volume 7: Industrial and Cogeneration; Manufacturing Materials and Metallurgy Jg. 7 2021 V007T16A002Online Volltext: dx.doi.org/
-
Surrogate models for the prediction of damping ratios in coupled acoustoelastic rotor-cavity systemsIn: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition: Volume 9B: Structures and Dynamics - Fatigue, Fracture, and Life Prediction; Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration / GT 2021, Virtual, Online, 7 - 11 June 2021 2021 V09BT29A009Online Volltext: dx.doi.org/
-
Experimenteller Beitrag zur verbesserten numerischen Simulation der turbulenten Strömung in Rückführkanälen mehrstufiger RadialverdichterDuisburg, Essen (2021) xix, 143, A2 SeitenOnline Volltext: dx.doi.org/ Online Volltext (Open Access)
-
An Euler-Based Throughflow Approach for an Axial Turbine at Supersonic Flow RegimesIn: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.) 2021 ETC2021-661Online Volltext: dx.doi.org/ (Open Access)
-
Simulation and analysis of a self-propelling heat removal system using supercritical CO₂ at different ambient temperaturesIn: Conference Proceedings of the 4th European sCO₂ Conference 2021 / 4th European sCO₂ Conference for Energy Systems, 23-24 March 2021, Online Conference / Brillert, Dieter (Hrsg.) 2021, S. 14 - 27Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Experimental validation of an analytical condensation model for the improvement of steam turbine design regarding flexibility requirementsIn: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.) 2021 ETC2021-562
-
Validation of a numerical model to support the design of additively manufactured aerostatic dry gas seals carried out on a test bench through use of seals with defined permeabilitiesIn: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.) 2021 ETC2021-541Online Volltext: dx.doi.org/ (Open Access)
-
Experimental Investigation of Centrifugal Flow in Rotor-Stator Cavities at High Reynolds Numbers > 10⁸In: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.) 2021 ETC2021-651
-
Conference Proceedings of the 4th European sCO₂ Conference 2021
4th European sCO₂ Conference for Energy Systems, 23-24 March 2021, Online Conference,Duisburg, Essen (2021) 93 SeitenOnline Volltext: dx.doi.org/ Online Volltext (Open Access) -
Mean-line analysis for supercritical CO₂ centrifugal compressors by using enthalpy loss coefficientsIn: Conference Proceedings of the 4th European sCO₂ Conference 2021 / 4th European sCO₂ Conference for Energy Systems, 23-24 March 2021, Online Conference / Brillert, Dieter (Hrsg.) 2021, S. 68 - 77Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
An attempt for establishing pressure ratio performance maps for supercritical carbon dioxide compressors in power applicationsIn: Conference Proceedings of the 4th European sCO₂ Conference 2021 / 4th European sCO₂ Conference for Energy Systems, 23-24 March 2021, Online Conference / Brillert, Dieter (Hrsg.) 2021, S. 124 - 130Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
The effect of the isentropic exponent on the performance map of supercritical compressors with carbon dioxide as an exampleIn: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.) 2021 ETC2021-667Online Volltext: dx.doi.org/ (Open Access)
-
Experimental investigations on the pressure fluctuations in the sealing gap of Dry gas seals with embedded pressure sensorsIn: Journal of Engineering for Gas Turbines and Power Jg. 143 (2021) Nr. 3, 031005Online Volltext: dx.doi.org/
-
Proof of concept for a novel interstage injection design in axial compressorsIn: Journal of Engineering for Gas Turbines and Power Jg. 143 (2021) Nr. 6, 061030Online Volltext: dx.doi.org/
-
Impact of volumetric system design on compressor inlet conditions in supercritical CO2 cyclesIn: Proceedings of Global Power and Propulsion Society / GPPS Chania20; 7th – 9th September, 2020 2020Online Volltext: dx.doi.org/ (Open Access)
-
Preliminary Design of Small-Scale Supercritical CO2 Radial Inflow TurbinesIn: Journal of Engineering for Gas Turbines and Power Jg. 142 (2020) Nr. 2, 021011Online Volltext: dx.doi.org/
-
Lessons from testing the sCO2-HeRo turbo-compressor-system
7th International Supercritical CO2Power Cycles Symposium: March 31 – April 2, 2020, San Antonio, USA,San Antonio, USA (2020) -
Deficits in Rans Modelling in the U-Turn of a Multistage Centrifugal CompressorIn: Proceedings of Global Power and Propulsion Society / GPPS Chania20; 7th – 9th September, 2020 2020 GPPS-CH-2020-4Online Volltext: dx.doi.org/ (Open Access)
-
Challenges of compressing hydrogen for pipeline transportation with centrifugal-compressorsIn: Proceedings of Global Power and Propulsion Society / GPPS Chania20; 7th – 9th September, 2020 2020 GPPS-CH-2020-0045Online Volltext: dx.doi.org/ (Open Access)
-
Experimentelle Untersuchung von Fluid-Struktur Interaktionen in vereinfachten RadialverdichterradseitenräumenDuisburg ; Essen (2020) XXII, 160 Seiten
-
The multi-phase flow test facility ⇜emma⇝ to investigate local heat transfer coefficients and liquid water films at wet steam conditionsIn: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 9: Oil and Gas Applications; Organic Rankine Cycle Power Systems; Steam Turbine / GT 2020; Virtual, Online; 21 - 25 September 2020 2020, S. V009T23A028Online Volltext: dx.doi.org/
-
Prediction in rotor–stator cavities at high reynolds numbers up to Re ≈ 2 ∙ 10⁸: Towards a new parametric modelIn: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 2E: Turbomachinery / GT 2020; Virtual, Online; 21 - 25 September 2020 2020, S. V02ET39A001Online Volltext: dx.doi.org/
-
Experimental investigations on the pressure fluctuations in the sealing gap of dry gas seals with embedded pressure sensorsIn: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 10A: Structures and Dynamics / GT 2020; Virtual, Online; 21 - 25 September 2020 2020, S. V10AT25A012Online Volltext: dx.doi.org/
-
Model validation of an euler-based 2D-throughflow approach for multistage axial turbine analysisIn: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: 2C: Turbomachinery / GT 2020; Virtual, Online; 21 - 25 September 2020 2020, S. V02CT35A055Online Volltext: dx.doi.org/
-
A design tool for supercritical CO2 radial compressors based on the two-zone modelIn: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 11: Structures and Dynamics: Structural Mechanics, Vibration, and Damping; Supercritical CO2 / GT 2020; Virtual, Online; 21 - 25 September 2020 2020, S. V011T31A012Online Volltext: dx.doi.org/ (Open Access)
-
Proof of concept for a novel interstage injection design in axial compressorsIn: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition / GT 2020; Virtual, Online; 21 - 25 September 2020 Jg. 8: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Marine; Microturbines, Turbochargers, and Small Turbomachines 2020, S. V008T17A005Online Volltext: dx.doi.org/
-
Impact of leakage inlet swirl angle in a rotor-stator cavity on flow pattern, radial pressure distribution and frictional torque in a wide circumferential reynolds number rangeIn: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 5 (2020) Nr. 2, S. 7Online Volltext: dx.doi.org/ (Open Access)
-
Investigation of aerodynamic effects in stator components of multistage centrifugal compressorsIn: 13th European Turbomachinery Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2019 / ETC 2019; Lausanne; Switzerland; 8 - 12 April 2019 2019Online Volltext: dx.doi.org/ (Open Access)
-
Reliable seals for turbomachines : Numerical analysis of the effects of compressible fluid flow through porous materials and narrow gapsIn: 13th European Turbomachinery Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2019 / ETC 2019; Lausanne; Switzerland; 8 - 12 April 2019 2019
-
Impact of leakage inlet swirl angle in a rotor-stator cavity on flow pattern, radial pressure distribution and frictional torque in a wide circumferential reynolds number rangeIn: 13th European Turbomachinery Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2019 / ETC 2019; Lausanne; Switzerland; 8 - 12 April 2019 2019
-
Experimental and numerical investigation on the flow in a return channel of multistage centrifugal compressorsIn: Proceedings of the ASME Turbo Expo: Volume 2B: Turbomachinery / ASME Turbo Expo 2019: Turbomachinery Technical Conference and Expositio; 17–21, 2019; Phoenix, USA 2019, S. GT2019 - 90455Online Volltext: dx.doi.org/
-
The behavior of the modal properties of weak and strong coupled acoustic modes at different pressure levels in a rotor-stator test rigIn: Open Archives of the 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, 16.-21.12.2017, Maui, Hawaii, USA 2019Online Volltext (Open Access)
-
Flow-induced steam valve vibrations : a literature review of excitation mechanisms, preventive measures, and design improvementsIn: Journal of Engineering for Gas Turbines and Power Jg. 141 (2019) Nr. 5, 051009Online Volltext: dx.doi.org/
-
Effect of Interstage Injection on Compressor Flow CharacteristicIn: Fluids Engineering Division Summer Meeting: Vol.5: Multiphase Flow / ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference July 28–August 1, 2019 San Francisco, California, USA 2019, S. V005T05A040Online Volltext: dx.doi.org/
-
Investigation on solid-liquid flow in the rear chamber of multi-stage slurry pumps with leakage flowIn: 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Apr 2016, Honolulu, United States / ISROMAC: 16th International Symposium on Transport Phenomena andDynamics of Rotating Machinery, 10.-15.04.2016, Honolulu, United States 2019Online Volltext (Open Access)
-
Stabilizing Effects of Supercritical CO2 Fluid Properties on Compressor OperationIn: 13th European Turbomachinery Conference on Turbomachinery Fluid Dynamics and Thermodynamics / ETC 2019; Lausanne, Switzerland; 8 - 12 April 2019 2019, S. 121
-
Investigation of the evaporation process of liquefied hydrocarbons in front of a compressorIn: ISROMAC 2017 / 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, 16.-21.12.2017, Maui, Hawaii, USA 2019Online Volltext (Open Access)
-
The Supercritical CO2 Heat Removal System - Status and Outlook
12th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-12) Qingdao, China, October 14-18, 2018,Duisburg, Essen (2019)Online Volltext: dx.doi.org/ Online Volltext (Open Access) -
Operational experiences and design of the sCO2-HeRo loopIn: Conference Proceedings of the 3rd European supercritical CO2 Conference 2019 / 3rd European supercritical CO2 Conference, September 19-20, 2019, Paris, France
Duisburg, Essen 2019, S. 125 - 137Online Volltext: dx.doi.org/ Online Volltext (Open Access) -
Stabilizing effects of supercritical CO₂ fluid properties on compressor operation
Proceedings of 13th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics, ETC13, Lausanne, Switzerland, 8–12 April 2019,In: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 4 (2019) Nr. 3, S. 20Online Volltext: dx.doi.org/ (Open Access) -
Creating meta attack language instances using archimate : Applied to electric power and energy system casesIn: Proceedings of 23rd International Enterprise Distributed Object Computing Conference / EDOC 2019; Paris; France; 28 - 31 October 2019 2019, S. 88 - 97Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Cycle calculations of a small-scale heat removal system with supercritical CO2 as working fluidIn: Journal of Nuclear Engineering and Radiation Science / American Society of Mechanical Engineers (ASME) (Hrsg.) Jg. 5 (2019) Nr. 1, 011011Online Volltext: dx.doi.org/
-
A test rig concept to study fluid structure interactions in a steam turbine valveIn: Proceedings of the ASME Turbo Expo: Vol. 8: Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines 2018Online Volltext: dx.doi.org/
-
Damping Behavior of Acoustic Dominant Modes in an Aeroacoustic Test Rig Representing a Simplified Geometry of a High Pressure Radial CompressorIn: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition: Volume 7C: Structures and Dynamics / ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT 2018, Oslo; Norway, 11 - 15 June 2018 2018, S. V07CT36A018Online Volltext: dx.doi.org/
-
Turbomachine Design for Supercritical Carbon Dioxide Within the sCO2-HeRo.eu ProjectIn: Journal of Engineering for Gas Turbines and Power Jg. 140 (2018) Nr. 12, 121017Online Volltext: dx.doi.org/ (Open Access)
-
Turbomachine design for supercritical carbon dioxide within the SCO₂-hero.EU projectIn: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition / GT 2018; Oslo; Norway; 11 - 15 June 2018 Jg. 9 2018Online Volltext: dx.doi.org/
-
Results of the International Wet Steam Modeling ProjectIn: Proceedings of the Institution of Mechanical Engineers: Part A, Journal of Power and Energy Jg. 232 (2018) Nr. 5, S. 550 - 570Online Volltext: dx.doi.org/ (Open Access)
-
Investigation on Thrust and Moment Coefficients of a Centrifugal TurbomachineIn: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 3 (2018) Nr. 2, S. 9Online Volltext: dx.doi.org/ (Open Access)
-
Droplet evaporation in the context of interstage injectionIn: 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Apr 2016, Honolulu, United States / ISROMAC: 16th International Symposium on Transport Phenomena andDynamics of Rotating Machinery, 10.-15.04.2016, Honolulu, United States 2018Online Volltext (Open Access)
-
Droplet deposition in radial turbinesIn: 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Apr 2016, Honolulu, United States / ISROMAC: 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 10.-15.04.2016, Honolulu, United States 2018Online Volltext (Open Access)
-
Challenges in Supercritical CO2 power cycle technology and first operational experience at CVRIn: Conference Proceedings of the 2nd European sCO2 Conference 2018 / 2nd European sCO2 Conference 2018, 30-31 August 2018, Essen, Germany 2018, S. 8 - 22Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Experimental investigation of the sCO2-HeRo compressorIn: Conference Proceedings of the 2nd European sCO2 Conference 2018 / 2nd European sCO2 Conference 2018, 30-31 August 2018, Essen, Germany 2018, S. 50 - 59Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Scaling considerations for the application of the sCO2-HeRo system in nuclear power plantsIn: Conference Proceedings of the 2nd European sCO2 Conference 2018 / 2nd European sCO2 Conference 2018, 30-31 August 2018, Essen, Germany 2018, S. 60 - 68Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Coupled thermal-structural-fluid numerical analysis of gas lubricated mechanical sealsIn: Proceedings of the ASME Turbo Expo: Vol. 7B: Structures and Dynamics / ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT 2018, Oslo, Norway, 11 June 2018 through 15 June 2018 2018Online Volltext: dx.doi.org/
-
Thermodynamic modelling aspects of wet compression in radial compressorsIn: Proceedings of the ASME Turbo Expo: Volume 9: Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy / ASME Turbo Expo 2018, Oslo, Norway, June 11–15, 2018 2018, S. V009T27A024Online Volltext: dx.doi.org/
-
Condensation in radial turbines : Part II: Application of the mathematical model to a radial turbine seriesIn: Journal of Turbomachinery Jg. 140 (2018) Nr. 10, S. 101002Online Volltext: dx.doi.org/
-
Condensation in Radial Turbines : Part I: Mathematical ModelingIn: Journal of Turbomachinery Jg. 140 (2018) Nr. 10, S. 101001Online Volltext: dx.doi.org/
-
Untersuchung des strömungs- und strukturdynamischen Verhaltens von Dampfturbineneinlassventilen im TeillastbetriebDuisburg, Essen (2017) 138 SeitenOnline Volltext (Open Access)
-
Investigation on flow-induced vibrations of a steam turbine inlet valve considering fluid-structure interaction effectsIn: Journal of Engineering for Gas Turbines and Power Jg. 139 (2017) Nr. 2, 022507Online Volltext: dx.doi.org/
-
Clarifying the Physics of Flow Separations in Steam Turbine Inlet Valves at Part Load Operation and Improved Design ConsiderationsIn: Journal of Fluids Engineering / American Society of Mechanical Engineers (ASME) (Hrsg.) Jg. 139 (2017) Nr. 8, S. 081105Online Volltext: dx.doi.org/
-
Droplet deposition in radial turbinesIn: European Journal of Mechanics / B: Fluids Jg. 61 (2017) S. 289 - 296Online Volltext: dx.doi.org/
-
Investigation on the Influence of Surface Roughness on the Moment Coefficient in a Rotor-Stator Cavity With Centripetal Through-FlowIn: Proceedings of the ASME Fluids Engineering Division Summer Meeting - 2017: Volume 1A, Symposia / ASME Fluids Engineering Division Summer Meeting, July 30-August 3, 2017, Waikoloa, Hawaii, USA 2017, S. V01AT03A001Online Volltext: dx.doi.org/
-
Business cycle desynchronisation : amplitude and beta vs. co-movementIn: Intereconomics Jg. 52 (2017) Nr. 4, S. 238 - 241Online Volltext: dx.doi.org/
-
Business Cycle Synchronization in the EMU : Core vs. PeripheryIn: Open Economies Review Jg. 28 (2017) Nr. 5, S. 863 - 892Online Volltext: dx.doi.org/ (Open Access)
-
Cycle calculations of a small-scale heat removal system with supercritical CO2 as working fluidIn: Proceedings of the 25th International Conference on Nuclear Engineering - 2017: Vol. 3: Nuclear fuel and material, reactor physics and transport theory; innovative nuclear power plant design and new technology application / 25th International Conference on Nuclear Engineering, Shanghai, China, July 2–6, 2017 2017, S. V003T13A001Online Volltext: dx.doi.org/
-
Introduction of an integrated turbo-electrical machineIn: Proceedings of the ASME Turbo Expo: Vol. 8: Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines / ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina, USA, June 26–30, 2017 2017, S. V008T26A008Online Volltext: dx.doi.org/
-
Identification of coupled natural frequencies in a rotor-stator test-rig for different gas propertiesIn: 12th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics / 12th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT12, April 3-7, 2017, Stockholm, Sweden / European Turbomachinery Society (Hrsg.) 2017 ETC2017-057Online Volltext: dx.doi.org/ (Open Access)
-
Raising Nuclear Reactor Safety to a Higher Level : The Supercritical CO2 Heat Removal System - "sCO2-HeRo"In: NENE 2017: Conference Proceedings / 26th International Conference Nuclear Energy for New Europe (NENE), September 11-14, 2017, Bled, Slovenia / Cizelj, Leon; Holler, Tadej (Hrsg.) 2017, S. 405.1 - 405.8
-
Zweistrahldüsen – Genauigkeit der Bestimmung von Tropfendurchmessern mit Phasen-Doppler Anemometrie
1st Symposium on Turbomachinery Test Facilities, TTF 2017, 11. - 12.05.2017, Bochum, Deutschland,Bochum (2017) -
Numerical investigation of Droplet dispersion in resting environment, cross flow and parallel flow
17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, December 16-21, 2017, Maui, Hawaii, USA,Maui, Hawaii, USA (2017) -
Correlation for prediction of dynamic fluid forces in steam turbine inlet valves
Global Power & Propulsion Forum 2017, GPPS Forum 17, 16.-18. Januar 2017, Zürich, Schweiz,(2017) -
PDA measurements in spray generated by twin-jet-nozzlesIn: Proceedings of the ASME Fluids Engineering Division Summer Meeting - 2017: Volume 1B, Symposia / ASME Fluids Engineering Division Summer Meeting, Waikoloa, Hawaii, USA, July 30–August 3, 2017 2017, S. V01BT06A001Online Volltext: dx.doi.org/
-
Investigation on thrust and moment coefficients of a centrifugal turbomachineIn: Open Archives of the 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / ISROMAC 2017; Maui; United States; 16 - 21 December 2017 2017
-
Investigation on the flow in a rotor-stator cavity with centripetal through-flowIn: 12th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics / 12th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT12, April 3-7, 2017, Stockholm, Sweden / European Turbomachinery Society (Hrsg.) 2017 ETC2017-097
-
Investigation on the flow in a rotor-stator cavity with centripetal through-flowIn: International Journal of Turbomachinery, Propulsion and Power (IJTPP) Jg. 2 (2017) Nr. 4, 18Online Volltext: dx.doi.org/ (Open Access)
-
Comparison of different numerical approaches for determination of compressible fluid flow in narrow gapsIn: Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2016: Volume 2C: Turbomachinery / ASME Turbo Expo; June 13-17, 2016; Seoul, South Korea 2016 GT2016-57898Online Volltext: dx.doi.org/
-
Reliability of condensation models for droplet deposition calculation in radial turbines
Wet Steam Conference, 2016,In: Wet Steam Conference Prague: Proceedings / Wet Steam Conference Prague : 12-14 September 2016 / Kolovratník, Michal (Hrsg.) 2016 -
Small scale sCO2 compressor impeller design considering real fluid conditionsIn: The 5th International Symposium - Supercritical CO2 Power Cycles / The 5th International Symposium - Supercritical CO2 Power Cycles, March 28- 31, 2016, San Antonio, Texas 2016
-
Parametric study of a novel groove design for dry gas sealsIn: Proceedings of the 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics / HEFAT 2016; 11 to 13 July 2016; Malaga, Spain 2016, S. 108 - 114
-
Untersuchung der Entstehung und Bewegung von Flüssigkeitsansammlungen auf Radialturbinenlaufradschaufeln mit einem erweiterten Navier-Stokes-LöserAachen (2016) 170 Seiten (Berichte aus der Strömungstechnik)
-
Investigation on Flow Induced Vibrations of a Steam Turbine Inlet Valve Considering Fluid Structure Interaction EffectsIn: ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition: Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines / ASME Turbo Expo 2016, 13.-17. Juni 2016, Seoul, South Korea 2016 GT2016-56314Online Volltext: dx.doi.org/
-
Investigation on Flow Induced Vibrations of a Steam Turbine Inlet Valve Considering Fluid Structure Interaction Effects
16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2016, 10. bis 15. April 2016, Honolulu, Hawaii, USA,(2016) -
The potential of interstage injection for axial compressors
16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, 10 -15 April 2016,Honolulu, Hawaii (2016) -
An educational laboratory with a remote controlled centrifugal pump test rigIn: Proceedings of the ASME Fluids Engineering Division summer meeting: Volume 2, Fora: Advances in Fluids Engineering Education; Cavitation and Multiphase Flow; Fluid Measurements and Instrumentation / Proceedings of the ASME Fluids Engineering Division summer meeting; FEDSM2016; July 10-14,21016, Washington, DC, USA 2016, S. V002T01A002Online Volltext: dx.doi.org/
-
A supercritical CO2 low temperature Brayton-cycle for residual heat removalIn: 5th International sCO2 Power Cycles Symposium: Proceedings / The 5th International Symposium - Supercritical CO2 Power Cycles, 28-31 März 2016, San Antonio, Texas 2016
-
The supercritical CO2 heat removal system - sCO2-HeRo
1st European Seminar on Supercritical CO2 (sCO2) Power Systems 29.-30. September 2016 - Vienna - Austria,(2016) -
Modification of a steam valve diffuser for enhanced full load and part load operation using numerical methodsIn: Periodica Polytechnica / Mechanical Engineering / Budapest University of Technology and Economics (Hrsg.) Jg. 60 (2016) Nr. 3, S. 185 - 192Online Volltext: dx.doi.org/
-
Reliability of condensation models for droplet deposition calculations in radial turbinesIn: Wet Stream Conference: 12-14 September 2016 : proceedings / Wet Steam Conference Prague, 12-14 September 2016, Prague, Czech Republic / Kolovratník, Michal; Ondřej, Bartoš (Hrsg.) 2016, S. 78 - 89
-
Innovative simulation techniques to determine dynamic forces in steam turbine inlet valves
ISimT-16, Symposium on Innovative Simulations in Turbomachinery, 28 - 29 November 2016, Regensburg, Germany,Regensburg (2016) -
Small scale sCO2 compressor impeller design considering real gas conditions
5th International sCO2 Power Cycles Symposium, San Antonio, Texas, USA, March 29–31, 2016,San Antonio, Texas (2016) -
Untersuchung des Sprayverhaltens zweier aufeinandertreffender Wasserstrahlen mittels Phasen-Doppler-AnemometrieIn: Technische Diagnostik / 12. Tagung "Technische Diagnostik", 20. bis 21. Oktober 2016, Merseburg, Germany 2016, S. 126 - 141
-
Experimental investigation of velocity fluctuations in a radial diffuser pumpIn: Journal of Hydrodynamics Jg. 27 (2015) Nr. 3, S. 332 - 339Online Volltext: dx.doi.org/
-
Investigation on the solid-liquid flow in the rear chamber of a submersible multi-stage slurry pumpIn: 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT11, March 23-27, 2015, Madrid, Spain / European Turbomachinery Society (Hrsg.) 2015 ETC2015-171Online Volltext (Open Access)
-
Experimental and Numerical Determination of Pressure and Velocity Distribution Inside a Rotor-Stator Cavity at Very High Circumferential Reynolds NumbersIn: 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT11, March 23-27, 2015, Madrid, Spain / European Turbomachinery Society (Hrsg.) 2015 ETC2015-097Online Volltext (Open Access)
-
Modification of a steam valve diffuser for enhanced full load and part load operation using numerical methods
16th International Conference on Fluid Flow Technologies, entitled “Conference on Modelling Fluid Flow” (CMFF’15), 1. - 4. September 2015, Budapest, Hungary,Budapest (2015) -
Numerical Investigation on the Vibration of Steam Turbine Inlet Valves and the Feedback to the Dynamic Flow FieldIn: Proceedings of the ASME Turbo Expo 2015: Power for Land, Sea, and Air: Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines / ASME Turbo Expo: Turbine Technical Conference and Exposition ; Montreal, Quebec; 2015.06.15-19 2015 GT2015-42182Online Volltext: dx.doi.org/
-
Improving the Design of Steam Turbine Inlet Valves by Numerical Methods for Enhanced Part Load OperationIn: 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT11, March 23-27, 2015, Madrid, Spain / European Turbomachinery Society (Hrsg.) 2015 ETC2015-107Online Volltext (Open Access)
-
Numerical Investigation on the Time-Variant Flow Field and Dynamic Forces Acting in Steam Turbine Inlet ValvesIn: Journal of Engineering for Gas Turbines and Power Jg. 137 (2015) Nr. 8, 081601Online Volltext: dx.doi.org/
-
Numerical Investigation of the Fluid and Structure Dynamics of a Steam Turbine Inlet Valve at Different Operation Conditions
Workshop on Safety and Control Valves; APRIL 8-9, 2015 - Brussels, Belgium,Brüssel (2015) -
Numerical Analysis of Compressible Fluid Flow in Narrow GapsIn: Proceedings of the ASME 4th Joint US-European Fluids Engineering Division Summer Meeting 2014: Vol. 1: Symposia B: Fluid machinery, fluid-structure interaction and flow-induced noise in industrial applications, flow applications in aerospace, flow manipulation and active control: theory, experiments and implementation, multiscale mehtods for multiphase flow, noninvasive measurements in single and multiphase flows / ASME Fluids Engineering Division Summer Meeting, August 3 - 7, 2014; Chicago, USA 2014, S. V01BT10A044Online Volltext: dx.doi.org/
-
Strömungsdiagnostik in Mehrphasenströmungen am Lehrstuhl für Strömungsmaschinen der Universität Duisburg-EssenIn: Tagungsband / 11. Tagung "Technische Diagnostik 2014" am 23./24. Oktober 2014 in Merseburg / 11. Tagung "Technische Diagnostik 2014" am 23./24. Oktober 2014 in Merseburg / Surek, Dominik (Hrsg.) 2014
-
Experimental Investigation on Turbulence Fields in a Radial Diffuser Pump Using PIV TechniqueIn: Advances in Mechanical Engineering Jg. 6 (2014) 702318(Open Access)
-
Analyze of the size of secondary droplets due to film separation at the blade trailing edgeIn: Proceedings of the ASME 4th Joint US-EuropeanFluids Engineering Division Summer Meeting 2014: Vol. 1: Symposia / ASME Fluids Engineering Division Summer Meeting; August 3 - 7, 2014; Chicago, USA 2014, S. V01BT10A006Online Volltext: dx.doi.org/
-
Experimentelle Untersuchung eines 4-stufigen Axialverdichters bei "Nassverdichtung"
Kolloquium - Fluidenergiemaschinen, Bochum, 2014,Bochum (2014) -
Sensitivity analysis of condensation model constants on calculated liquid film motion in radial turbinesIn: Proceedings of the ASME Turbo Expo 2014: Volume 1B: Marine; Microturbines, Turbochargers and Small Turbomachines; Steam Turbines / ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, June 16–20, 2014; Düsseldorf, Germany / Hodson, Howard (Hrsg.) 2014, S. V01BT27A021Online Volltext: dx.doi.org/
-
Numerical investigation on the time-variant flow field and dynamic forces acting in steam turbine inlet valvesIn: ASME Turbo Expo 2014: Turbine Technical Conference and Exposition: Volume 1B: Marine; Microturbines, Turbochargers and Small Turbomachines; Steam Turbines / ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, 16.-20. Juni 2014, Düsseldorf, Germany / Hodson, Howard (Hrsg.) 2014Online Volltext: dx.doi.org/
-
Sensitivity of condensation calculations on model coefficients with respect to turbo machinery applicationsIn: 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery: ISROMAC 2014 : Honolulu, Hawaii, USA, 24 -28 February 2014 2014
-
Flow characteristics of porous metal structures for specified permeability manufactured by laser beam melting technologyIn: Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2014: Volume 2A: Advanced Manufacturing / ASME 2014 International Mechanical Engineering Congress and Exposition November 14–20, 2014 Montreal, Canada 2014, S. V02AT02A058Online Volltext: dx.doi.org/
-
Instationäre Strömung in Dampfturbineneinlassventilen
Workshop: Instationäre Aerodynamik und Aeroelastik in Turbomaschinen,Bochum (2014) -
Numerical Investigation on Under Expanded Wall Jet Separation in a Steam Turbine Valve DiffuserIn: 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / ISROMAC 2014, 24 - 28 February 2014, Honolulu, United States 2014
-
Test rig design to explore water droplet behavior in a four stage axial compressorIn: Proceedings of the ASME International Mechanical Engineering Congress and Exposition / IMECE 2013, San Diego, United States, 15 - 21 November 2013 2014 63429Online Volltext: dx.doi.org/
-
Experimental determination of a four stage axial compressor map operating in wet compressionIn: Proceedings of the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition: Volume 2A: Turbomachinery / ASME Turbo Expo 2014: Turbine Technical Conference and Exposition June 16–20, 2014 Düsseldorf, Germany / Hodson, Howard (Hrsg.) 2014, S. V02AT37A046Online Volltext: dx.doi.org/
-
Cheating prevention in peer-to-peer based massively multiuser virtual environmentsDuisburg, Essen (2013) VI, 260 S.
-
Application of a new numerical solver to turbomachinery flow problems
10th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2013, 15. bis 19 April 2013, Lappeenranta, Finland,In: Proceedings of the Institution of Mechanical Engineers: Part A, Journal of Power and Energy Jg. 227 (2013) Nr. 6, S. 628 - 636Online Volltext: dx.doi.org/ -
Experimental Validation of Methods Providing Boundary Conditions to Simulate the Evaporation Process of Water Injected Into High Speed Air FlowIn: Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2013: Volume 6B: Turbomachinery 2013 V06BT37A024Online Volltext: dx.doi.org/
-
Use of Euler free surface flow analysis to provide appropriate injection conditions in Euler-Lagrange numerical modelsIn: Computational Methods in Multiphase Flow VII / Brebbia, C.A; Vorobieff, P.; Mammoli, A.A (Hrsg.) 2013, S. 35 - 47Online Volltext: dx.doi.org/
-
Verbesserung der Ergebnisqualität eines laserbasierten optischen Messverfahrens zur Bestimmung der Tropfendurchmesser eines Wassersprays in einem zylindrischen MessvolumenIn: 21. Fachtagung für Lasermethoden in der Strömungsmesstechnik: Tagungsband / Fachtagung "Lasermethoden in der Strömungsmesstechnik", 3. - 5. September 2013, München 2013 58
-
Unique Numerical Scheme for a Modified Equation of Fluid Motion : Approaching New Solver Development to a Fundamental Flow ProblemIn: Science Journal of Physics / Science Journal Publication (Hrsg.) (2013) Sjp-231Online Volltext: dx.doi.org/ Online Volltext
-
Water droplet evaporation at high gas pressure and temperature levels : Part I: comparison of experimental results with a one-dimensional simulationIn: Computational Thermal Sciences Jg. 5 (2013) Nr. 3, S. 215 - 226Online Volltext: dx.doi.org/
-
1D Model for Water Droplet Evaporation at Elevated Gas Pressure and Temperature Levels with a Rosin-Rammler Droplet Distribution
11th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, May 6-11, 2013, Shenzhen, China,Shenzhen, China (2013) -
A Novel Numerical Scheme for a Scale-Invariant Form of Equation of Motion : Development of Solver and Application to Engineering Flow ProblemsIn: International Journal of Energy and Power Engineering Jg. 2 (2013) Nr. 2, S. 37 - 45Online Volltext: dx.doi.org/ (Open Access)
-
Influence of the swirling flow in the side cavities of a high-pressure centrifugal compressor on the characteristics of excited acoustic modesIn: Journal of Turbomachinery Jg. 135 (2013) Nr. 3,Online Volltext: dx.doi.org/
-
Experimentelle Untersuchungen zum Verdampfungsprozess von Wassertropfen bei hohen Druck- und TemperaturniveausIn: 20. Fachtagung für Lasermethoden in der Strömungsmesstechnik: Tagungsband / Fachtagung "Lasermethoden in der Strömungsmesstechnik", 04. - 06. September 2012, Rostock / Leder, A.; Brede, M.; Ruck, B.; Dopheide, D. (Hrsg.) 2012
-
Influence of Different Gas Models on the Numerical Results of High-Velocity CondensationIn: 15th Conference on Modelling Fluid Flow / CMFF'12, 4 - 7 September 2012, Budapest, Hungary 2012
-
Numerical Simulation of a Micro Pelton Turbine Working in the Two-Phase Flow RegimeIn: Proceedings of the ASME Fluids Engineering Division Summer Meeting - 2012: Vol. 1: Symposia, Part A / FEDSM`12, July 8 - 12, 2012, Rio Grande, Puerto Rico 2012, S. 357 - 365Online Volltext: dx.doi.org/
-
Experimentelle und numerische Untersuchung der Verdampfung von Wassertropfen bei variablen Druck- und TemperaturbedingungenIn: 10. Tagung "Technische Diagnostik 2012": Tagungsband / Tagung Technische Diagnostik ; 25 - 26.10. 2012; Merseburg / Surek, Dominik (Hrsg.) 2012, S. 48 - 61
-
Test rig design for Investigations of Water Droplet Evaporation at High Pressure and Temperature LevelsIn: Proceedings of the Forteenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / ISROMAC-14, 27. Februar - 02. März 2012; Honolulu, Hawaii 2012
-
Emergence of Kelvin-Helmholtz instabilities in gas turbine rim cavities - A parameter studyIn: Proceedings of the ASME Turbo Expo 2012: Volume 4: Heat Transfer, Part B / ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, 11-15 Juni 2012, Copenhagen, Denmark / American Society of Mechanical Engineers (Hrsg.) 2012, S. 2097 - 2106Online Volltext: dx.doi.org/
-
Generation of Gas Turbine Component Maps on Basis of Operational DataIn: Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition: Volume 8: Turbomachinery, Parts A, B, and C / GT 2012, Copenhagen, Denmark, 11 June 2012 - 15 June 2012 2012, S. 2023 - 2037Online Volltext: dx.doi.org/
-
Investigation of the flow in the impeller side clearances of a centrifugal pump with volute casingIn: Journal of Thermal Science Jg. 21 (2012) Nr. 3, S. 197 - 208Online Volltext: dx.doi.org/
-
Investigation of unsteady flow-induced impeller oscillations of a single-blade pump under off-design conditionsIn: Journal of Fluids and Structures Jg. 35 (2012) S. 89 - 104Online Volltext: dx.doi.org/
-
Application of different strategies of partitioned fluid-structure interaction simulation for a single-blade pump impellerIn: Proceedings of the Institution of Mechanical Engineers: Part E, Journal of Process Mechanical Engineering Jg. 226 (2012) Nr. 4, S. 297 - 308Online Volltext: dx.doi.org/
-
Influence of the Swirling Flow in the Side Cavities of a High-Pressure Centrifugal Compressor on the Characteristics of Excited Acoustic ModesIn: Proceedings of the ASME Turbo Expo 2012: Volume 8: Turbomachinery, Part A / ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, 11-15 Juni 2012, Copenhagen, Denmark 2012, S. 627 - 639Online Volltext: dx.doi.org/
-
Water Droplet Evaporation at High Pressure and Temperature Levels : Part II: Comparison of Experimental Results with a 1D SimulationIn: Proceedings of the 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics / HEFAT2012, Malta, 16 - 18 July 2012 2012, S. 291 - 296
-
Improvement of Axial-Flow Pump Part Load Behavior by a Double Inlet NozzleIn: Proceedings of the ASME Fluids Engineering Division summer meeting - 2012: Vol. 1: Symposia, Part A / FEDSM`12, July 8 - 12, 2012, Rio Grande, Puerto Rico 2012, S. 479 - 489Online Volltext: dx.doi.org/
-
Auslegung, Konstruktion und Fertigung von strömungsmechanischen Funktionsprototypen mittels Rapid ManufacturingIn: RTejournal: Forum für Rapid Technologie / Fachhochschule Aachen (Hrsg.) Jg. 9 (2012)
-
Water droplet evaporation at high pressure and temperature levels : Part I: Experimental investigations of spray patterns at varied test conditionsIn: Proceedings of the 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 2012 / HEFAT2012, 16 – 18 July 2012, Malta 2012, S. 1624 - 1630
-
Model simplifications for numerical simulation of ingestion through gas turbine rim sealsIn: Proceedings of the 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / ISROMAC-14, 27. Februar - 02. März 2012, Honolulu, Hawaii 2012
-
Numerical prediction of unsteady pressure field within the whole flow passage of a radial single-blade pumpIn: Journal of Fluids Engineering / American Society of Mechanical Engineers (ASME) (Hrsg.) Jg. 134 (2012) Nr. 10, 101103Online Volltext: dx.doi.org/
-
Investigation of Periodically Unsteady Flow in a Radial Pump by CFD Simulations and LDV MeasurementsIn: Journal of Turbomachinery Jg. 133 (2011) Nr. 1, 011004Online Volltext: dx.doi.org/
-
A Comparison of One-Way and Two-Way Coupling Methods for Numerical Analysis of Fluid-Structure InteractionsIn: Journal of Applied Mathematics Jg. 2011 (2011) Nr. 6, 853560Online Volltext: dx.doi.org/
-
Investigation of Nucleation Influence on the Efficiency of Radial TurbinesIn: 12th International Conference on Multiphase Flow in Industrial Plants, MFIP12 / International Conference Multiphase Flow in Industrial Plants, Ischia (Napoli), Italy, September 21-23, 2011 2011
-
Computational Study of Kelvin-Helmholtz Instability created by Interaction of the Mainstream Flow and the Seal Flow in Gas TurbinesIn: Proceedings of the ASME Turbo Expo 2011: Vol. 5 / ASME Turbo Expo, June 6 - 10, 2011, Vancouver, British Columbia, Canada / American Society of Mechanical Engineers (Hrsg.) 2011, S. 731 - 740Online Volltext: dx.doi.org/
-
Untersuchung der Strömungsinstabilitäten im Teillastbereich von AxialpumpenIn: Delta-p: das moderne Pumpemmagazin Jg. 17 (2011) Nr. 3,
-
Radialturbinen für die RestwärmeverwertungIn: Ingenieur-Spiegel: Fachmagazin für Ingenieure (2011) Nr. 3, S. 48 - 49
-
Investigation of the Flow in the Side Chambers of a Centrifugal Pump with Volute CasingIn: Proceedings of the 10th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows / ISAIF, 10th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, 4-7 July 2011, Brussels, Belgium 2011
-
The technique of dithering : a parameter studyIn: Measurement Science and Technology Jg. 22 (2011) Nr. 2, 025401Online Volltext: dx.doi.org/
-
Enforcing game rules in untrusted P2P-based MMVEsIn: Proceedings of the 4th International ICST Conference on Simulation Tools and Techniques / SIMUTools '11; Barcelona, Spain; March 22 - 24, 2011 2011, S. 288 - 295Online Volltext: dx.doi.org/ Online Volltext
-
VoroStore – A Secure and Reliable Data Storage for Peer-to-Peer-Based MMVEsIn: 11th IEEE International Conference on Computer and Information Technology / CIT 2011; Pafos, Cyprus; 31 August - 2 September 2011 2011, S. 35 - 40Online Volltext: dx.doi.org/
-
Efficiency Augmentation of Gas Turbine CyclesIn: 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2011 / 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2011; Mauritius, 11 to 13 July 2011 2011
-
Unsteady flow investigation in rotor-stator interface of a radial diffuser pumpIn: Forschung im Ingenieurwesen Jg. 74 (2010) Nr. 4, S. 233 - 242Online Volltext: dx.doi.org/
-
Application of Different Turbulence Models in Unsteady Flow Simulations of a Radial Diffuser PumpIn: Forschung im Ingenieurwesen Jg. 74 (2010) Nr. 3, S. 123 - 133Online Volltext: dx.doi.org/
-
Experimental Study of Acoustic Resonances in the Side Cavities of a High-Pressure Centrifugal Compressor Exited by Rotor/Stator InteractionIn: Proceedings of the ASME Turbo Expo 2010: Volume 7: Turbomachinery, Parts A, B, and C / ASME Turbo Expo 2010: Power for Land, Sea, and Air June 14–18, 2010, Glasgow, UK 2010, S. 2339 - 2351Online Volltext: dx.doi.org/
-
Numerical simulation of twophase flow in a Pelton turbine with Eulerian-Eulerian method
8th Joint ANSYS & FZD Multiphase Flows Workshop, 23 - 24 June, 2010, Dresden-Rossendorf, Germany,Dresden (2010) -
Application of a New Numerical Solver for the Scale-Invariant Form of the Equation of Motion to Engineering Flow Problems
7th international conference on heat transfer, fluid mechanics, and thermodynamics (HEFAT2010) ; 7 (Antalya, Turkey) : 2010.07.19-21,(2010) -
Generation of Turbine Maps Using a Fusion of Validated Operational Data and a Streamline Curvature MethodIn: Proceedings of the ASME Turbo Expo 2010: Vol. 7 / ASME Turbo Expo, June 14 - 18, 2010, Glasgow, UK 2010, S. 2757 - 2768Online Volltext: dx.doi.org/
-
Entwicklung und Tuning eines Mehr-Fehler-Isolators für die thermodynamische Diagnose von GasturbinenIn: Tagungsband / 9. Tagung "Technische Diagnostik 2010" am 28./29. Oktober 2010 in Merseburg / 9. Tagung "Technische Diagnostik 2010" am 28./29. Oktober 2010 in Merseburg / Surek, Dominik (Hrsg.) 2010
-
Numerical and Experimental Investigation of the Flow in the Side Cavities of a Centrifugal PumpIn: 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010 (ISROMAC-13) / ISROMAC, Honolulu, Hawaii, USA, 4 - 7 April 2010 2010, S. 372 - 380
-
Validation of Operational Gas Turbine Data Using a Model Based ApproachIn: 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010 (ISROMAC-13) / International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, 4 - 7 April 2010 2010, S. 257 - 266
-
A Closed Loop Approach to Simulate the Unsteady Three-Dimensional Flow in an Axial Flow PumpIn: ASME 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels: ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting: Volume 1, Symposia – Parts A, B, and C / ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels; Montreal, Quebec, Canada, August 1–5, 2010 2010, S. 631 - 645Online Volltext: dx.doi.org/
-
Application of Euler-Euler model for numerical simulation of a radial turbine working in the two-phase flow regimeIn: WSEAS Transactions on Fluid Mechanics / World Scientific and Engineering Academy and Society (WSEAS) (Hrsg.) Jg. 5 (2010) Nr. 4, S. 276 - 286
-
Numerical simulation of two phase flow in a Pelton turbine with Eulerian-Eulerian method
8th ANSYS & FZD Multiphase Flows Short Course and Workshop, Dresden, Juni 2010,Dresden (2010) -
Quantitativer Vergleich von gemessenen Strömungsgeschwindigkeiten einer radialen Kreiselpumpe mit Ergebnissen numerischer SimulationenIn: Lasermethoden in der Strömungsmesstechnik / Fachtagung "Lasermethoden in der Strömungsmesstechnik", 17. Fachtagung, 8. bis 10. September 2009, Erlangen / Delgado, Antonio (Hrsg.) 2009
-
Experimental evaluation of the time-variant flow field in a radial diffuser pump by laser doppler velocimetryIn: 8th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC 2009: Conference Proceedings / 8th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC 2009, EUROTURBO 8, 23. - 27. März 2009, Graz, Austria / Heitmeir, Franz (Hrsg.) 2009, S. 1091 - 1102
-
The use of real gas properties for design and flow field simulations of a small centripetal steam turbineIn: ASME 2009 Fluids Engineering Division Summer Meeting: Volume 2: Fora / 2009 ASME Fluids Engineering Division summer conference, FEDSM2009, 2.-6. August 2009, Vail, Colorado, USA 2009, S. 147 - 153Online Volltext: dx.doi.org/
-
Time-Resolved Particle Image Velocimetry (PIV) Measurements in a Radial Diffuser PumpIn: Proceedings of the ASME Fluids Engineering Division Summer Conference - 2009 / 2009 ASME Fluids Engineering Division Summer Conference, 2-6 August 2009, Vail, Colorado USA 2009, S. 323 - 329Online Volltext: dx.doi.org/
-
Investigation of turbulence and blade orientation effects in a radial diffuser pump by laser Doppler velocimetryIn: Proceedings of the Institution of Mechanical Engineers: Part A, Journal of Power and Energy Jg. 223 (2009) Nr. 8, S. 991 - 999Online Volltext: dx.doi.org/
-
Investigation of Flow Instabilities Near The Rim Cavity of A 1.5 Stage Gas TurbineIn: Proceedings of the ASME Turbo Expo 2009: Vol. 3 / ASME Turbo Expo 2009, 8 - 12 Juni 2009, Orlando, Florida, USA 2009, S. 1263 - 1272Online Volltext: dx.doi.org/
-
Investigation of the Fluid Flow in a Rotor-Stator Cavity With Inward Through-FlowIn: Proceedings of the ASME Fluids Engineering Division summer conference - 2009: Vol. 2: Fora / ASME Fluids Engineering Division Summer Conference, (Vail, Colo.) : 2009.08.02-06 FEDSM 2009, S. 207 - 218Online Volltext: dx.doi.org/
-
A Comparative Numerical Study of the Modified versus the Navier-Stokes Equations of MotionIn: Recent Advances in Fluid Mechanics and Aerodynamics / 7th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics (FMA '09), Moscow, Russia, August 20-22, 2009 / Sohrab, Siavash H.; Catrakis, Jaris J.; Kobasko, Nikolai (Hrsg.) 2009
-
Improvement of Axial-Flow Pump Part Load Behaviour : an Experimental and Numerical StudyIn: Conference Proceedings - Conference on Modelling Fluid Flow, CMFF '09, September 9 - 12, 2009 / Conference on Modelling Fluid Flow, CMFF '09, 9-12 September 2009, Budapest / Vad, János (Hrsg.) 2009
-
Interaction Between Aerodynamic Phenomena And Impeller Structure Of High Pressure Radial CompressorsIn: 8th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics / European Conference on Turbomachinery Fluid Dynamics and Thermodynamics ; 8 (Graz, Austria) : 2009.03.23-27 / Heitmeir, Franz (Hrsg.) 2009
-
Designing high-power sewage water pumpsIn: World Pumps (2009) Nr. 514, S. 20 - 25Online Volltext: dx.doi.org/
-
Application of Simulation Methods Considering the Interaction between Fluid and StructureIn: Proceedings of the WSEAS International Conferences / 7th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics (FMA '09), Moscow, Russia, August 20-22, 2009 / Sohrab, Siavash H.; Catrakis, Jaris J.; Kobasko, Nikolai (Hrsg.) 2009
-
Comparison of Periodic Flow Fields in a Radial Pump among CFD, PIV, and LDV ResultsIn: International Journal of Rotating Machinery (2009) 410838Online Volltext: dx.doi.org/ (Open Access)
-
Verstopfungsfreie Kreiselpumpen für eine zuverlässige AbwasserförderungIn: Ingenieur-Spiegel: Fachmagazin für Ingenieure Jg. 3 (2009) S. 24 - 25
-
Unsteady flow visualization at part-load conditions of a radial diffuser pump : by PIV and CFDIn: Journal of Visualization Jg. 12 (2009) Nr. 1, S. 65 - 72Online Volltext: dx.doi.org/
-
Fighting cheating in P2P-based MMVEs with disjoint path routing
Workshops der Wissenschaftlichen Konferenz Kommunikation in Verteilten Systemen 2009 (WowKiVS 2009),In: Electronic Communications of the EASST Jg. 17 (2009)Online Volltext: dx.doi.org/ Online Volltext (Open Access) -
Messung der periodisch-instationären Strömung im Laufrad und im beschaufelten Diffusor einer radialen Kreiselpumpe kleiner spezifischer Drehzahl mit LDVIn: Lasermethoden in der Strömungsmesstechnik / Fachtagung "Lasermethoden in der Strömungsmesstechnik", 9. - 11. September 2008, Karlsruhe / Ruck, Bodo; Leder, Alfred; Dopheide, Dietrich (Hrsg.) 2008
-
PIV Measurements of Unsteady Flow in a Diffuser Pump at Different Flow RatesIn: 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 17-22 February 2008, Honolulu, Hawaii 2008
-
Thermodynamische Diagnose von Gasturbinen: Theorie und PraxisIn: Tagungsband: 8. Tagung "Technische Diagnostik 2008" am 16./17. Oktober 2008 in Merseburg / 8. Tagung "Technische Diagnostik 2008" am 16./17. Oktober 2008 in Merseburg 2008
-
Improvement of Performance Prediction by Automated Assimilation of Gas Turbine Component MapsIn: Proceedings of the ASME Turbo Expo 2008: Vol. 6 / ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany 2008, S. 1761 - 1770Online Volltext: dx.doi.org/
-
The Rise of Complexity in Describing Fluid Flow in Rotating CavitiesIn: Proceedings of the ASME Fluids Engineering Division summer conference - 2008: Vol. 2 / ASME Fluids Engineering Division Summer Conference, August 10 - 14, 2008, Jacksonville, Florida, USA 2008, S. 261 - 270
-
Computer based development of sewage water pumps for extreme operating conditions and high power consumptionIn: Pump Users International Forum 2008: Proceedings / Pump Users International Forum, 28th - 29th October 2008, Düsseldorf, Germany 2008
-
Part Load Characteristic Investigation of a Highly Loaded Axial Flow Pump with Casing Treatment Comparison of Experimental and Numerical ResultsIn: 24th Symposium on Hydraulic Machinery and Systems / 24th IAHR Symposium on Hydraulic Machinery and Systems, October 27 - 31, 2008, Foz do Iguassu, Brazil 2008
-
Unsteady Three-Dimensional Flow Phenomena in an Axial Flow Pump at Different Operating PointsIn: AProceedings of the ASME Fluids Engineering Division summer conference - 2008: presented at 2008 ASME Fluids Engineering Division summer conference, August 10 - 14, 2008, Jacksonville, Florida, USA ; Vol. 2: Fora / ASME Fluids Engineering Division summer conference; August 10–14 2008; Jacksonville, Fla. 2008, S. 277 - 283Online Volltext: dx.doi.org/
-
Numerical and Experimental Investigation of the Flow in a Centrifugal Pump Stage : WSEAS International Conference on Fluid Mechanics ; 5 (Acapulco) : 2008.01.25-27In: Theoretical and experimental aspects of fluid mechanics: proceedings of the 5th WSEAS International Conference on Fluid Mechanics (FLUIDS'08) ; Acapulco, Mexico, 25 - 27 January 2008 / WSEAS International Conference on Fluid Mechanics ; 5 (Acapulco) : 2008.01.25-27 / Sohrab, Siavash H. (Hrsg.) 2008
-
Investigation on the Time-Variant Flow in a Single-Blade Centrifugal PumpIn: Theoretical and experimental aspects of fluid mechanics: proceedings of the 5th WSEAS International Conference on Fluid Mechanics (FLUIDS'08) ; Acapulco, Mexico, 25 - 27 January 2008 / 5 th WSEAS International Conference on Fluid Mechanics, Acapulco, Mexico, 25 - 27 January 2008 / Sohrab, Siavash H. (Hrsg.) 2008
-
Application of an Enhanced 1D Network Model to Calculate the Flow Properties of a Pre-Swirl Secondary Air SystemIn: Proceedings of the ASME Turbo Expo 2008 Heat Transfer / ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany 2008, S. 1423 - 1430Online Volltext: dx.doi.org/
-
Measurement of Periodic Flow Field in a Radial Diffuser Pump by PIV and LDV MethodsIn: Hydro Technology and the Evironment for the New Century / 24th IAHR Symposium on Hydraulic Machinery and Systems, 27.-31. Oktober 2008, Foz do Iguassu, Brazil 2008
-
Analysis of Unsteady Flow in a Radial Diffuser PumpIn: Fluid Machinery and Fluid Mechanics: 4th International Symposium (4th ISFMFE) / 4th International Symposium on Fluid Machinery and Fluid Engineering, 4th ISFMFE, 24-27 November 2008, Beijing, China / Xu, Jianzhong; Wu, Yulin; Zhang, Yangjun; Zhang, Junyue (Hrsg.) 2008, S. 291 - 296Online Volltext: dx.doi.org/
-
Towards an authentication service for peer-to-peer based massively multiuser virtual environmentsIn: International Journal of Advanced Media and Communication (IJAMC) Jg. 2 (2008) Nr. 4, S. 364 - 379Online Volltext: dx.doi.org/
-
Ten Years of Operating Experience with SGT5-4000F : Market-Driven Evolution of Gas Turbines and Plants
POWER-GEN Asia 2007 ; Bangkok - Thailand - from 4. - 6. 9. 2007,(2007) -
Numerical Study on the Pressure Fluctuations in a Complete Stage of a Centrifugal PumpIn: Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2006 / 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2006 (Isromac-11) ., February 26 - March 2, 2006, Honolulu, Hawaii USA 2007
-
Numerical Investigation on Impeller-Diffuser Interactions in a Radial PumpIn: Proceedings of the 7th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC 2007 / 7th European Conference on Turbomachinery (Euroturbo), March 5-9, 2007, Athens, Greece 2007
-
Comparison of Pump Impeller Orbit Curves Obtained by Measurement and FSI SimulationIn: ASME Pressure Vessels and Piping Conference: Volume 4: Fluid-Structure Interaction / ASME Pressure Vessels and Piping Conference, San Antonio, Texas, USA, July 22–26, 2007 2007, S. 41 - 48Online Volltext: dx.doi.org/
-
Investigations of a Pre-Swirl Cooling Air Flow System with Data Acquisition in the Absolute and Relative Frame of ReferenceIn: Proceedings of the WSEAS international conferences: 5th IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment (HTE '07), 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics (FMA '07) / IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment ; 5 (Vouliagmeni, Athens) : 2007.08.25-27 2007
-
CFD Analysis of Flow in High-Radius Pre-Swirl SystemsIn: ASME Turbo Expo 2007: Power for Land, Sea, and Air: Volume 4: Turbo Expo 2007, Parts A and B / ASME Turbo Expo 2007, 14.-17. Mai 2007, Montreal, Canada 2007, S. 1159 - 1167Online Volltext: dx.doi.org/
-
Numerical and Experimental Evaluation of the Time-Variant Flow Field in a Single-Blade Centrifugal PumpIn: 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2007) / HEFAT2007; 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics; 1 – 4 July 2007, Sun City, South Africa 2007 BF1
-
Vergleich von berechneten und gemessenen Strömungsgeschwindigkeiten in einer Kreiselpumpe mit EinschaufelradIn: Delta-p: das moderne Pumpemmagazin Jg. 13 (2007) Nr. 1,
-
Untersuchung des periodisch-instationären Geschwindigkeitsfeldes im Laufrad und im beschaufelten Diffusor einer radialen Kreiselpumpenstufe kleiner spezifischer Drehzahl mit der PIV-MethodeIn: Lasermethoden in der Strömungsmesstechnik / Fachtagung "Lasermethoden in der Strömungsmesstechnik", 04. - 06. September 2007, Rostock / Leder, Alfred; Brede, Martin; Hüttmann, Frank; Ruck, Bodo; Dopheide, Dietrich (Hrsg.) 2007, S. 32
-
Flow Phenomena in a Highly-Loaded Single-Stage Axial Flow Pump - Comparison of Experimental and Numerical ResultsIn: Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference - 2007Fora: presented at 2007 5th Joint ASME/JSME Fluids Engineering Summer Conference, July 30 - August 2, 2007, San Diego, California, USA ; Vol. 2, Pt. B / Joint ASME/JSME Fluids Engineering Summer Conference ; 5; 2007; San Diego, Calif. 2007, S. 979 - 984Online Volltext: dx.doi.org/
-
Experimental Investigation of Hydrodynamic Forces for Different Configurations of Single-Blade Centrifugal PumpsIn: Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2006 (Isromac-11) / 11th international symposium on transport phenomena and dynamics of rotating machinery; February 26 - March 2, 2006, Honolulu, Hawaii USA. 2007
-
Numerical Investigation on Pressure Fluctuations for Different Configurations of Vaned Diffuser PumpsIn: International Journal of Rotating Machinery (2007) S. 34752Online Volltext: dx.doi.org/ (Open Access)
-
A Study on Impeller-Diffuser Interactions in a Radial PumpIn: Proceedings of the 7th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC 2007 / 7th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC 2007, 5.-9. März 2007, Athens, Greece / K. D. Papailiou (Hrsg.) 2007, S. 773 - 782
-
Application of Fluid/Structure Interaction Methods to Determine the Impeller Orbit Curves of a Centrifugal PumpIn: Proceedings of the WSEAS international conferences: 5th IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment (HTE '07), 5th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics (FMA '07) / IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics ; 5 (Vouliagmeni, Athens) : 2007.08.25-27 2007, S. 169 - 174
-
Saubere Kühlluft für heiße Turbinen : Partikelabscheidung im Kühlluftsystem von GasturbinenIn: Essener Unikate: Berichte aus Forschung und Lehre (2007) Nr. 31: Ingenieurwissenschaften - Von Nano bis Giga: : Computersimulationen, S. 44 - 53Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Qualitative comparison between numerical and experimental results of unsteady flow in a radial diffuser pumpIn: Journal of Visualization Jg. 10 (2007) Nr. 4, S. 349 - 357Online Volltext: dx.doi.org/
-
Measurement of the periodic flow field in a radial diffuser pump by the PIV-methodIn: 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007: Volume 2: Fora, Parts A and B / 5th Joint ASME/JSME Fluids Engineering Summer Conference, 30. July - 2. August 2007, San Diego, USA 2007, S. 841 - 848Online Volltext: dx.doi.org/
-
Experimental Determination of the Hydrodynamic Imbalance of a Single-Blade Centrifugal PumpIn: Proceedings of the WSEAS HEAT '06, FLUID '06 / 4th IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment (HEAT '06) & 4th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics (FLUID '06), 21. - 23. August 2006, Elounda, Griechenland 2006, S. 331 - 336
-
Numerical Study on Impeller-Diffuser Interactions with Radial Gap Variation PumpIn: Proceedings of the 4th WSEAS International Conference on Fluid Mechanics and Aerodynamics / 4th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics, FLUID '06, 21. - 23. August 2006, Elounda, Griechenland 2006, S. 289 - 294
-
Measurement of the Periodic Unsteady Flow in a Single-Blade Centrifugal Pump by PIV-MethodIn: Proceedings of the WSEAS HEAT '06, FLUID '06 / 4th IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment (HEAT '06) & 4th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics (FLUID '06), 21. - 23. August 2006, Elounda, Griechenland 2006
-
Modified Theory of Laminar Flow Around Rigid and Liquid CylindersIn: Proceedings of the WSEAS HEAT '06, FLUID '06 / 4th IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment (HEAT '06) & 4th IASME/WSEAS International Conference on Fluid Mechanics and Aerodynamics (FLUID '06), 21. - 23. August 2006, Elounda, Griechenland 2006, S. 195 - 203
-
Determination of Pump Impeller Deflection : comparison of FSI-Simulations to MeasurementsIn: ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated With the 14th International Conference on Nuclear Engineering: Volume 2: Fora / ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated With the 14th International Conference on Nuclear Engineering, Miami, Florida, USA, July 17–20, 2006 2006, S. 291 - 296Online Volltext: dx.doi.org/
-
Comparison of Experimental and Numerical Obtained Velocity Fields in a Single-Blade Centrifugal PumpIn: ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated With the 14th International Conference on Nuclear Engineering: Volume 2: Fora / ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated With the 14th International Conference on Nuclear Engineering, Miami, Florida, USA, July 17–20, 2006 2006, S. 265 - 271Online Volltext: dx.doi.org/
-
Sensitivity Study on the Impact of Surface Roughness due to Milling on the Efficiency of Shrouded Centrifugal Compressor ImpellersIn: ASME Turbo Expo 2006: Power for Land, Sea, and Air: Volume 6: Turbomachinery, Parts A and B / ASME Turbo Expo 2006: Power for Land, Sea, and Air, Barcelona, Spain, May 8–11, 2006 2006, S. 1069 - 1076Online Volltext: dx.doi.org/
-
Numerical and Experimental Investigation on the Flow Induced Oscillations of a Single-Blade Pump ImpellerIn: Journal of Fluids Engineering / American Society of Mechanical Engineers (ASME) (Hrsg.) Jg. 128 (2006) Nr. 4, S. 783 - 793Online Volltext: dx.doi.org/
-
Flow Analysis in Gas Turbine Pre-Swirl Cooling Air Systems : Variation of Geometric ParametersIn: ASME Turbo Expo 2006: Power for Land, Sea, and Air: Volume 3: Heat Transfer, Parts A and B / ASME Turbo Expo 2006 - Power for Land, Sea & Air (TE06), 8-11 May 2006, Barcelona, Spain 2006, S. 1403 - 1411Online Volltext: dx.doi.org/
-
Einsatz von Fluid-Struktur-Interaktionsmethoden zur Berechnung der Orbitkurven von PumpenrotorenIn: Tagungsband - 7. Tagung Technische Diagnostik 2006 / 7. Tagung Technische Diagnostik ; 7; 2006; Merseburg / Surek, Dominik (Hrsg.) 2006
-
Quantitativer Vergleich von numerisch und experimentell ermittelten Strömungsfeldern in einer EinschaufelradpumpeIn: Lasermethoden in der Strömungsmesstechnik / 14. Fachtagung Lasermethoden in der Strömungsmesstechnik, 5. bis 7. September 2006, Physikalisch-Technische Bundesanstalt, Braunschweig / Dopheide, Dietrich; Müller, Harald; Strunck, Volker; Ruck, Bodo; Leder, Alfred (Hrsg.) 2006, S. 44
-
Flow field visualization of a single-blade centrifugal pump using PIV-Method : Comparison to numerical resultsIn: Journal of Visualization Jg. 9 (2006) Nr. 4, S. 358Online Volltext: dx.doi.org/
-
A New Method to Simulate Rotor-Stator Interaction in a Centrifugal Pump StageIn: ASME 8th Biennial Conference on Engineering Systems Design and Analysis: Volume 2: Automotive Systems, Bioengineering and Biomedical Technology, Fluids Engineering, Maintenance Engineering and Non-Destructive Evaluation, and Nanotechnology / 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 Juli 2006, Torino, Italy 2006, S. 677 - 684Online Volltext: dx.doi.org/
-
The Influence of Leakage Flow on the Main Flow in a Radial Pump StageIn: 23rd IAHR Symposium on Hydraulic Machinery and Systems: Conference Proceedings / 23rd IAHR Symposium on Hydraulic Machinery and Systems, 17.-21. Oktober 2006, Yokohama, Japan / Avellan, Franc̜ois (Hrsg.) 2006
-
Application of Basic Fluid Mechanic Relations to Estimate the Influence of Surface Roughness on the Aerodynamics of Centrifugal Compressor ImpellersIn: Proceedings of the WSEAS/IASME International Conferences / WSEAS/IASME International Conferences, Miami, Florida, USA, January 18-20, 2006 2006
-
Practical Application of Basic Fluid Mechanic Relations to Estimate the Impact of Surface Roughness Due to Milling on the Aerodynamics of Shrouded Centrifugal Compressor ImpellersIn: WSEAS Transactions on Fluid Mechanics / World Scientific and Engineering Academy and Society (WSEAS) (Hrsg.) Jg. 1 (2006) Nr. 1, S. 22 - 30(Open Access)
-
Numerical Investigation of Radial Gap Influence on Diffuser Induced Impeller FlowIn: WSEAS Transactions on Fluid Mechanics / World Scientific and Engineering Academy and Society (WSEAS) (Hrsg.) Jg. 1 (2006) Nr. 5, S. 472 - 479
-
Experimental Investigation of Transient Hydrodynamic Forces of a Single-Blade Centrifugal PumpIn: Proceedings of the 4th WSEAS International Conference on Fluid Mechanics and Aerodynamics / 4th WSEAS International Conference on Fluid Mechanics and Aerodynymics, Elounda, Greece, August 21-23, 2006 2006, S. 331 - 336
-
Numerical and Experimental Investigation of Cavitating Flow in a Centrifugal PumpIn: Proceedings of the 5th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion / International Symposium on Multiphase Flow (ISMF), Heat Mass Transfer and Energy Conversion ; 5; 2005; Xi'an 2005
-
Numerical Simulation and Experiments on the Flow in a Multistage Centrifugal PumpIn: Proceedings of the Sixth International Conference on Fluid Power Transmission and Contro / International Conference on Fluid Power Transmission and Control ; 6 (Hangzhou) : 2005.04.05-08 / Lu, Yongxiang; Wei, Qingfeng; Li, Wei (Hrsg.) 2005
-
Reliable Transport of Sewage Water with Centrifugal Pumps : All Technical Problems SolvedIn: Sustainable development of energy, water and environment systems: Proceedings of the 3rd Dubrovnik Conference / Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems ; 3 (Dubrovnik, Croatia) : 2005.06.05-10 / Afgan, Naim H. (Hrsg.) 2005, S. 407 - 426
-
Numerical Investigation of the Transient Flow in a Centrifugal Pump StageIn: ASME 2005 Fluids Engineering Division Summer Meeting: Volume 2: Fora / ASME 2005 Fluids Engineering Division Summer Meeting, Houston, Texas, USA, June 19–23, 2005 2005, S. 71 - 76Online Volltext: dx.doi.org/
-
Comparison of Calculated and Measured Hydrodynamic Forces of a Centrifugal Sewage Water PumpIn: Proceedings: 1st International Conference on Experiments/Process/System Modelling/Simulation/Optimization / International Conference on Experiments/Process/System Modelling/Simulation/Optimization, Athens, July 6th to July 9th, 2005 / Tsahalis, Demos T. (Hrsg.) Jg. 1 2005, S. 249 - 256
-
Investigations of Dust Separation in a Gasturbine Pre-Swirl Cooling Air System Using New, Enhanced Simulation MethodsIn: Proceedings of the ASME Fluids Engineering Division summer conference: Vol. 1: Symposia, Parts A and B / ASME Fluids Engineering Division summer conference ; (Houston, Tex.) : 2005.06.19-23 2005, S. 1631 - 1637Online Volltext: dx.doi.org/
-
A Contribution to the Abrasive Effect of Particles in a Gas Turbine Pre-Swirl Cooling Air SystemIn: Proceedings of the ASME Turbo Expo 2005: Vol. 3: Turbo Expo 2005, Parts A and B / ASME Turbo Expo 2005 ; (Reno-Tahoe) : 2005.06.06-09 2005, S. 1113 - 1120Online Volltext: dx.doi.org/
-
Simulation of Flow in Pre-Swirl Systems with Emphasis on Rotor Stator TreatmentIn: Computational fluid and solid mechanics 2005: proceedings Third MIT Conference on Computational Fluid and Solid Mechanics June 14 - 17, 2005 / 3rd M.I.T Conference on Computational Fluid and Solid Mechanics, June 14-17, 2005, Massachusetts Institute of Technology, Boston, USA 2005
-
Theoretische und experimentelle Untersuchung des Sekundärluftsystems stationärer Gasturbinen
20. Siemens-Jahrestagung, Duisburg, 09.06.2005,(2005) -
Computational Analysis of Flow and Heat Transfer in a Direct-Transfer Pre-swirl SystemIn: 6th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics: Conference Proceedings / European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics, 7-11 March 2005, Lille, France 2005
-
Simulation of Flow in Gas Turbine Pre-swirl Systems with Emphasis on Rotor-Stator Interface TreatmentIn: Proceedings of the 3rd WSEAS/IASME International Conferences / 3rd WSEAS/IASME, Heat transfer, thermal engineering & environment, fluid mechanics and aerodynamics, 20-22 August 2005, Corfu Island, Greece; Hassan, Ibrahim; Krope, Jurij 2005, S. 206 - 111
-
Periodically Unsteady Flow in a Single-Blade Centrifugal Pump : Numerical and Experimental ResultsIn: Proceedings of the ASME Fluids Engineering Division summer conference: Vol. 1: Symposia, Parts A and B / ASME Fluids Engineering Division Summer Conference, June 19 - 23, 2005, Houston, Texas, USA 2005, S. 1223 - 1231Online Volltext: dx.doi.org/
-
Flow Field Visualization of a Single-Blade Centrifugal Pump using PIV-Method : comparison to Numerical ResultsIn: The 5th Pacific Symposium on Flow Visualization and Image Processing / 5th Pacific Symposium on Flow Visualization and Image Processing, PSFVIP 5, 26 - 29 September 2005, Daydream Island, Australia 2005
-
Untersuchung der periodisch instationären Strömung in einer EinschaufelradpumpeIn: 13. Fachtagung Lasermethoden in der Strömungsmesstechnik / Fachtagung "Lasermethoden in der Strömungsmesstechnik" ; 13 (Cottbus) : 2005.09.06-08 2005 Beitrag 33, 9 S.
-
Investigation of the Three-Dimensional Time Accurate Flow in a Single-Blade Sewage Water PumpIn: SACAM '04: 18 - 21 January 2004, Johannesburg / 4th South African Conference on Applied Mechanics ; 18 - 21 January 2004, Johannesburg 2004
-
Messung der strömungsinduzierten Auslenkungen des Rotors einer radialen AbwasserpumpeIn: Tagungsband - 6. Tagung Technische Diagnostik / Tagung Technische Diagnostik, 21. und 22. Oktober 2004, Merseburg 2004
-
Dust Separation in a Gas Turbine Pre-Swirl Cooling Air System : A Parameter VariationIn: Proceedings of the ASME Turbo Expo 2004: Vol. 4 / ASME Turbo Expo 2004, June 14 - 17, 2004, Vienna, Austria 2004, S. 231 - 240Online Volltext: dx.doi.org/
-
Analysis of Dust Separation Inside a Pre-Swirl Cooling Air SystemIn: ISROMAC 10 : 2004 March 7 - 11, Honolulu, Oahu, Hawaii, USA: International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (10 : 2004 : Honolulu, Hawaii) / Bohn, Dieter (Hrsg.) 2004
-
Investigation Into the Computational Analysis of Direct-Transfer Pre-Swirl Systems for Gas Turbine CoolingIn: Proceedings of the ASME Turbo Expo 2004: presented at the 2004 ASME Turbo Expo, June 14 - 17, 2004, Vienna, Austria / ASME Turbo Expo 2004; 2004; Vienna 2004 Paper No. GT2004-54151, pp. 453-460Online Volltext: dx.doi.org/
-
Theoretical and Experimental Investigation of the Flow Field in a 2-Stage Centrifugal BlowerIn: Proceedings of the Third International Conference on Heat Transfer, Fluid Mechanics & Thermodynamics / International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, , HEFAT 2004, Cape Town, South Africa, 21 - 24 June 2004 2004
-
PIV- und LDV-Messungen im beschaufelten Diffusor einer radialen KreiselpumpeIn: Lasermethoden in der Strömungsmesstechnik: 12. Fachtagung 2004 der Deutschen Gesellschaft für Laser-Anemometrie / Fachtagung "Lasermethoden in der Strömungsmesstechnik" ; 12 (Karlsruhe) : 2004.09.07-09 / Ruck, Bodo (Hrsg.) 2004, S. 19
-
Experimental Investigation of Flow Induced Rotor Oscillations in a Centrifugal Sewage Water PumpIn: Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference - 2004: Vol. 3 / ASME 2004 Heat Transfer/Fluids Engineering Summer Conference; Charlotte, North Carolina, USA, July 11–15, 2004 2004, S. 23 - 28Online Volltext: dx.doi.org/
-
Comparison of Calculated and Measured Flow induced Oscillations of Centrifugal Pump RotorsIn: 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery / International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, March 07 - 11, 2004 2004
-
Numerische Simulation der zeitabhängigen, räumlichen Strömung in einer Kreiselpumpe mit EinschaufelradIn: Delta-p: das moderne Pumpenmagazin Jg. 10 (2004) Nr. 2, S. 44 - 47
-
Flow Induced Vibrations of a Single-Blade Centrifugal PumpIn: Proceedings of the Third International Conference on Heat Transfer, Fluid Mechanics & Thermodynamics / International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, , HEFAT 2004, Cape Town, South Africa, 21 - 24 June 2004 2004
-
Optimization of a small 2-stage centrifugal blower by CFD methodsIn: Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference - 2004: Vol. 3 / ASME 2004 Heat Transfer/Fluids Engineering Summer Conference; Charlotte, North Carolina, USA, July 11–15, 2004 2004, S. 29 - 36Online Volltext: dx.doi.org/
-
Grundlagenuntersuchungen an rotierenden Ringräumen zur Optimierung des Sekundärluftsystems moderner GasturbinenIn: Stationäre Gasturbinen: Fortschritte und Betriebserfahrungen / Tagung "Stationäre Gasturbinen", 23. und 24. November 2004, Leverkusen / VDI-Energietechnik (Hrsg.) 2004
-
Measurement of Flow Induced Rotor Oscillations in a Single-Blade Centrifugal PumpIn: Emerging technology in fluids, structures, and fluid-structure interactiona - 2004: Vol.1: Fluid Dynamics and Fluid Structure Interactions / ASME/JSME Pressure Vessels and Piping Conference, San Diego, California, USA, July 25 - 29, 2004 2004, S. 167 - 174Online Volltext: dx.doi.org/
-
Flow Induced Rotor Oscillations of a Centrifugal Sewage Water PumpIn: Noise and vibration engineering: Proceedings of ISMA 2004 / ISMA 2004, Leuven, 2004 September 20 - 22 ; / Sas, P. (Hrsg.) 2004
-
Theoretical and Experimental Investigation on the Flow Induced Vibrations of a Centrifugal PumpIn: Proceedings of the 5th Biennial International Pipeline Conference / Volumes 1, 2, and 3 2004, S. 39 - 46Online Volltext: dx.doi.org/
-
Investigation of Internal Cooling Air Flow of Gas Turbines with Attention to Heat TransferIn: Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Vol. 2: Symposia, Parts A, B, and C / ASME/JSME Joint Fluids Engineering Conference, Honolulu, Hawaii, USA, July 6–10, 2003 2003, S. 627 - 632Online Volltext: dx.doi.org/
-
Virtuelle Produktentwicklung am Beispiel eines PumpenlaufradesIn: Chemie - Ingenieur - Technik (CIT) Jg. 75 (2003) Nr. 1- 2, S. 13 - 22Online Volltext: dx.doi.org/
-
Application of Conjugate CFD to the Internal Cooling Air Flow System of Gas TurbinesIn: Proceedings of the ASME Turbo Expo 2003: Volume 5: Turbo Expo 2003, Parts A and B / ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference, Atlanta, Georgia, USA, June 16–19, 2003 2003, S. 1051 - 1060Online Volltext: dx.doi.org/
-
Experimental and Numerical Analysis of the Flow Structure and Dust Separation Inside a Pre-Swirl Cooling Air SystemIn: Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Vol. 2: Symposia, Parts A, B, and C / ASME/JSME Joint Fluids Engineering Conference, July 6 - 10, 2003, Honolulu, Hawaii 2003, S. 577 - 582Online Volltext: dx.doi.org/
-
Investigations of Dust Separation in the Internal Cooling Air System of Gas TurbinesIn: Proceedings of the ASME Turbo Expo 2003: Volume 5: Turbo Expo 2003, Parts A and B / ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference, Atlanta, Georgia, USA, June 16–19, 2003 2003, S. 985 - 992Online Volltext: dx.doi.org/
-
Investigation on the Unsteady Flow in Radial Sewage Water Pumps to Determine the Hydrodynamic ForcesIn: 5th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics: conference proceedings / European Conference on Turbomachinery, 17 - 22 March, 2003, Praha - Czech Republic / Št'astný, Miroslav (Hrsg.) 2003, S. 551 - 562
-
Calculation of Flow Induced Vibration Amplitudes of Radial Sewage Water PumpsIn: Emerging technology in fluids, structures, and fluid-structure interactions, 2003 / ASME Pressure Vessels and Piping Conference, Cleveland, Ohio, July 20 - 24, 2003 2003, S. 45 - 53Online Volltext: dx.doi.org/
-
Unsteady Flow in Single-Blade Sewage Water PumpsIn: Selected papers presented at the Second International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics (HEFAT) / International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics ; 2; 2003; Livingstone, Victoria Falls / Meyer, Josua P.; Stehlík, Peter (Hrsg.) 2003, S. 1 - 2
-
Calculation of Hydrodynamic Forces and Flow Induced Vibrations of Centrifugal Sewage Water PumpsIn: Proceedings of the 4th ASME/JSME Joint Fluids Engineering ConferenceSymposia / ASME/JSME Joint Fluids Engineering Conference, July 6 - 10, 2003, Honolulu, Hawaii 2003, S. 603 - 608
-
Experimental Analysis of Dust Separation in the Internal Cooling Air System of Gas TurbinesIn: Proceedings of the ASME Turbo Expo 2002: Vol. 3: Turbo Expo 2002, Parts A and B / ASME Turbo Expo 2002, 03.-06.06.2002, Amsterdam 2002, S. 731 - 737Online Volltext: dx.doi.org/
-
Messung von Strömungsgeschwindigkeiten mit der Particle-Image-Velocimetry in einem GasturbinenrotorIn: Lasermethoden in der Strömungsmesstechnik: 10. Fachtagung, 10. - 12. September 2002, Rostock / 10. Fachtagung "Lasermethoden in der Strömungsmesstechnik" 09.-12.10.2002, Rostock / Leder, Alfred (Hrsg.) 2002, S. 29.1 - 29.6
-
Berechnung der Schwingungsamplituden von AbwasserpumpenIn: Tagungsband: 5. Tagung Technische Diagnostik 2002: 24. und 25. Oktober 2002, Merseburg / 5. Tagung Technische Diagnostik, 24.-25.10.2002, Merseburg 2002 Kapitel 14
-
Particle-Image-Velocimetry in einer KreiselpumpenrückführstufeIn: Lasermethoden in der Strömungsmesstechnik / Fachtagung "Lasermethoden in der Strömungsmesstechnik, 10. - 12. September 2002, Rostock / Leder, Alfred (Hrsg.) 2002, S. 44.1 - 44.6
-
Grundlagenuntersuchungen an rotierenden Ringräumen zur Optimierung des Sekundärluftsystems moderner GasturbinenIn: Gasturbinen in Praxis und Entwicklung: Fortschritte und Betriebserfahrungen ; Tagung Leverkusen, 12. und 13. November 2002 / Tagung "Gasturbinen in Praxis und Entwicklung", 12. und 13. November 2002, Leverkusen 2002, S. 85 - 94
-
Untersuchung zur schwingungsoptimierten Gestaltung von AbwasserpumpenIn: Schwingungen in Anlagen und Maschinen: Tagung Veitshöchheim, 16. und 17. Mai 2001 / Tagung "Schwingungen in Anlagen und Maschinen", 16. und 17. Mai 2001, Veitshöchheim 2001, S. 59 - 79
-
Strömungsberechnung im Kühl- und Sperrluftsystem von Gasturbinen zur Optimierung des SekundärluftsystemsAachen (2001) VI, 119 S. : Ill., graph. Darst. (Berichte aus der Strömungstechnik)
-
The Flow Structure in Rotating Hollow Shafts with Radial Inflow and Axial ThroughflowIn: ASME Turbo Expo 2001: Power for Land, Sea, and Air June 4–7, 2001 New Orleans, Louisiana, USA / ASME Turbo Expo 2001: Power for Land, Sea, and Air, June 4–7, 2001, New Orleans Jg. 3: Heat Transfer; Electric Power; Industrial and Cogeneration 2001 V003T01A077Online Volltext: dx.doi.org/
-
Economic development of efficient centrifugal pump impellers by numerical methodsIn: World Pumps (2001) Nr. 416, S. 48 - 53Online Volltext: dx.doi.org/
-
Einfache Gleitringdichtungen für gefährliche Medien?In: UmweltMagazin Jg. 31 (2001) Nr. 6, S. 42 - 44
-
Das Pumpenlaufrad aus dem ComputerIn: Process Jg. 8 (2001) Nr. 11, S. 42 - 45
-
CAx-Prozesskette für PumpenlaufräderIn: Informationsverarbeitung in der Produktentwicklung 2001: effiziente 3D-Produktmodellierung - Fortschritte und Fallstricke / Tagung "Informationsverarbeitung in der Produktentwicklung 2001" , 19. und 20. Juni 2001, Stuttgart 2001, S. 313 - 334
-
Flow Losses in Rotating Passages in Secondary Air Systems of Gas TurbinesIn: Proceedings of the 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-8) / 8th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery: ISROMAC-8, 26-30 March 2000, Honolulu / Han, Je-Chin (Hrsg.) 2000
-
Total Pressure Losses in Rotor Systems with Radial InflowIn: Proceedings of the ASME Turbo Expo 2020 / ASME Turbo Expo 2000: Power for Land, Sea, and Air, May 8–11, 2000, München Jg. 3: Heat Transfer, Electric Power, Industrial and Cogeneration 2000 V003T01A087Online Volltext: dx.doi.org/
-
Leckraten versagender GleitringdichungenIn: Tagungsband: 4. Tagung Technische Diagnostik 2000 : 26. und 27. Oktober 2000, Fachhochschule Merseburg / 4. Tagung Technische Diagnostik, 26.-27.10.2000, Merseburg 2000
-
Calculation of Flow Losses in Rotating Passages of Gas Turbine Cooling SystemsIn: ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition: Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration Indianapolis, Indiana, USA, June 7–10, 1999 / ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition ; Indianapolis, Indiana, USA, June 7–10, 1999 1999 V003T01A069; 11 pagesOnline Volltext: dx.doi.org/
-
Trockenlaufschäden und die FolgenIn: Delta-p: das moderne Pumpemmagazin Jg. 5 (1999) Nr. 2, S. 46 - 49
-
Schwingungsprobleme bei AbwasserpumpenIn: Umwelt: die Fachzeitschrift für Technik und Management Jg. 29 (1999) Nr. 10, S. 6 - 9
-
A New Particle Counter Using Nonimaging Optics and Real-Time Correlation Filter for Particle Detection.In: Aerosol Science and Technology Jg. 30 (1999) Nr. 6, S. 545 - 555Online Volltext: dx.doi.org/
-
A New Particle Counter Using Non-Imaging Optics and Real-Time Correlation Filter for Particle Detection in Clean Gas LinesIn: Particle Contamination an Monitoring Conference / SEMICON Europa '99, Munich, Germany 1999
-
Development of a New Wide-Range Differential Mobility Particle Sizer (DMPS)In: 3. International ETH-Workshop on 'Nanoparticle Measurement' / 3. International ETH-Workshop on 'Nanoparticle Measurement' 9./10. August 1999, ETH Zürich 1999
-
Cooling Air Flow in a Multi Disc Industrial Gas Turbine RotorIn: ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition: Volume 4: Heat Transfer; Electric Power; Industrial and Cogeneration ; Stockholm, Sweden, June 2–5, 1998 / ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition ; Stockholm, Sweden, June 2–5, 1998 1998, S. V004T09A027Online Volltext: dx.doi.org/
-
Energetische Optimierung von Kreiselpumpen für den AbwassertransportIn: Forum für Umweltforschung / Mölter, Wolfgang (Hrsg.) 1997
-
Loss Prediction for Rotating Passages in Secondary Air SystemsIn: ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition: Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration / ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition; Orlando, Florida, USA, June 2–5, 1997 1997 Paper No. 97-GT-215, pp. V003T09A041Online Volltext: dx.doi.org/
-
Multigrid Method for Unsteady Viscous FlowsIn: Proceedings of the 1997 ASME Fluids Engineering Division summer meeting: June 22 - 26, 1997, Vancouver, British Columbia, Canada / ASME Fluids Engineering Division summer meeting ; 1997 (Vancouver, British Columbia) : 1997.06.22-26 1997
-
Über das Schwingungsverhalten radialer Kreiselpumpen für AbwasserIn: Preprints / Pumpentagung - Pump Congress, Karlsruhe 1996, 30. September - 02. Oktober / Pumpentagung ; 1996 (Karlsruhe) : 1996.09.30-10.02 1996
-
Neue Entwicklungen bei AbwasserpumpenIn: Umwelt: die Fachzeitschrift für Technik und Management Jg. 26 (1996) Nr. 10, S. 10 - 13
-
Pumpen in der AbwasserwirtschaftIn: Umwelt: die Fachzeitschrift für Technik und Management Jg. 26 (1996) Nr. 5, S. 12 - 19
-
Vorhersage des Schwingungsverhaltens von AbwasserpumpenIn: Schwingungen in Maschinen, Fahrzeugen und Anlagen: Berechnung - Messung - Bewertung - Minderung ; Tagung Veitshöchheim, 10. und 11. Oktober 1996 / VDI-Schwingungstagung '96 / VDI-Schwingungstagung ; (Veitshöchheim) : 1996.10.10-11 1996, S. 311 - 325
-
A Comparison of Different Solution Procedures for Compressible Viscous FlowsIn: Finite volumes for complex applications: problems and perspectives: [First International Symposium on Finite Volumes for Complex Applications, Problems and Perspectives, July 15 - 18, 1996, Rouen, France] / International Symposium on Finite Volumes for Complex Applications, Problems and Perspectives ; 1 (Rouen) : 1996.07.15-18 / Benkhaldoun, Fayssal (Hrsg.) 1996, S. 441 - 452
-
Numerical Investigations on the Effects of Swirling Combustor Exit Flow on HP-Turbine Inlet Flow for the Industrial Gas Turbine THM 1304In: ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition: Volume 3B: General / SME 1993 International Gas Turbine and Aeroengine Congress and Exposition, Cincinnati, Ohio, USA, May 24–27, 1993 1993, S. V03BT16A012Online Volltext: dx.doi.org/
-
Abwassertransport mit kompakten, verstopfungsfreien KreiselpumpenIn: WLB: Umwelttechnik für Industrie und Kommune Jg. 36 (1992) Nr. 9, S. 26 - 31
-
Simulation of the Three-Dimensional Viscous Flow in the Passage Towards the HP-Turbine of an Industrial Gas TurbineIn: Proceedings of the 1992 FIDAP User Conference 1992
-
Förderung von Schmutz- bzw. Abwasser mit verstopfungsfreien Kreiselpumpen
Vortrag Universität-GH-Duisburg,Duisburg (1992) -
Berechnung und Konstruktion einer Kreiselpumpenbaureihe für die Förderung von Schmutz- und Rohabwasser
Vortrag Fachhochschule Dortmund,Dortmund (1992) -
Computation of 3D Flow Phenomena in Axial Flow Compressor Blade RowsIn: ASME 1991 International Gas Turbine and Aeroengine Congress and Exposition: Volume 1: Turbomachinery / ASME 1991 International Gas Turbine and Aeroengine Congress and Exposition, 3-6 June 1991, Orlando, Florida, USA 1991, S. V001T01A026Online Volltext: dx.doi.org/
-
Strömungstechnische Untersuchungen an Kreiselpumpen mit Spiral- und T-Spiralrotoren : Interner Bericht(1990)
-
Calculation of three-dimensional parabolic flows with arbitrary boundary geometriesIn: International chemical engineering Jg. 30 (1990) Nr. 1, S. 21 - 35
-
Numerische Berechnung der dreidimensionalen Strömung in AxialverdichterlaufrädernDuisburg (1989) 158 Seiten
-
Ein Beitrag zur Berechnung dreidimensionaler parabolischer Strömungen in beliebig berandeten GeometrienIn: Forschung im Ingenieurwesen Jg. 53 (1987) Nr. 4, S. 125 - 136Online Volltext: dx.doi.org/
-
Beitrag zur Berechnung der Strömung in mehrstufigen Axialverdichtern unter besonderer Berücksichtigung der Seitenwandgrenzschichten und der SekundärströmungenDuisburg (1986) 174 Seiten
-
Beitrag zur Berechnung der reibungsbehafteten Strömung in mehrstufigen AxialverdichternIn: Thermische Strömungsmaschinen '85: 1. Strömungsberechnung, stationäre Strömungsversuche, instationäre Strömungsvorgänge / Tagung Thermische Strömungsmaschinen, 17. und 18. September 1985, Bochum 1985
-
Variable Gittergeometrie in vielstufigen AxialverdichternIn: Thermische Strömungsmaschinen '83: Tagung. '83. Tagung Köln 1983 / VDI-Tagung "Thermische Strömungsmaschinen", 1983, Köln 1983
-
Theoretische Untersuchung zur optimalen Verstellung der Geometrie von VerzögerungsgitternDüsseldorf (1982) 171 Seiten
(Fortschrittberichte der VDI-Zeitschriften / 07 ; 65)
2024
Ren, H.; Schuster, S.; Brillert, D.: Method for Considering Real Gas Equations of State in Through-flow ProgramsIn: Conference Proceedings of the 5th European sCO2 Conference 2023, March 14-16, 2023, Prague, Czech Republic. DOI: https://doi.org/10.1016/j.energy.2024.131282
Tegethoff, K.; Schuster, S.; & Borges de Almeida, C.; Brillert, D.: Numerical Investigation of the Flow through a Centrifugal Compressor operating in Close Vicinity of the Critival Point of CO2. In: Proceedings of ASME Turbo Expo 2024, June 24-28, 2024, London, UK.
Linnemann, N.; Dolle, B.; Brillert, D.: Centrifugal Compressor Instrumentation for Developing an Anomaly Detection Method Using vibration- and Acoustic Measurement Data, In: Proceedings of ASME Turbo Expo 2024, June 24-28, 2024, London, UK.
Folkers, S.; Schuster S.; Brillert D.: Transfer Functions for the Inverse Design of Turbomachinery for Thermal Power Storage. In: Proceedings of ASME Turbo Expo 2024, June 24-28, 2024, London, UK.
Schifflechner,C.; Villasana, A.; Spliethoff, H. & Schuster, S.; Brillert, D. & White, M. & de Reus, J.; Saar, M.: Annual Performance Profiles of CO2-Plume Geothermal (CPG) Systems: Impact of the Ambient Conditions, In: Proceedings of 8th International Supercritical CO2 Power Cycles Symposium, February 27 – 29, 2024, San Antonio, Texas.
2023
Schifflechner, C.; de Reus, J.; Spliethoff, H.; & Saar, M.; Schuster, S.; & Brillert, D.: The potential of CO2-Plume Geothermal (CPG) Systems for CO2 component manufacturers: opportunities and development needs. In: Proceedings of 7th International Seminar on ORC Power Systems, September 4-6, 2023, Seville, Spain.
Hacks, A.: Untersuchung zur Auslegungsmethodik von sCO2-Kreisläufen in Abhängigkeit von Verdichter- und Kreislaufauslegungsparametern, 2023. Universität Duisburg-Essen. Dissertation.
Tegethoff, K.; Glos, S.; Musch, C.; Schuster, S.; Brillert, D.: Investigation of the Applicability of Methods Approved for Steam to the Design of Labyrinth Seals in Turbines Operated with CO2 in Supercritical State. In: Proceedings of ASME Turbo Expo 2023, June 26-30, 2023, Boston, USA. DOI: 10.1115/GT2023-102220.
Martens, O.; Schuster, S.; Brillert, D.: An Euler-Based Throughflow Approach for Axial Compressors. In: Proceedings of ASME Turbo Expo 2023, June 26-30, 2023, Boston, USA. DOI: 10.1115/GT2023-101615.
Unglaube, T.; Brillert, D.: Acoustoelastic Modes in a Rotor-Cavity System with Superposed Through Flow. In: Proceedings of ASME Turbo Expo 2023, June 26-30, 2023, Boston, USA. DOI: 10.1115/GT2023-102214.
Hussein, I. A. E.; Mäki-Iso, M.; Tiainen, J.; Turunen-Saaresti, T., Schuster, S.; Brillert, D.: Reduction of Mechanical Stresses in Centrifugal Compressor Impellers for Hydrogen Applications. In: Proceedings of 15th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, April 24-28, 2023, Budapest, Hungary. DOI: https://doi.org/10.29008/ETC2023-109
Ren, H.; Schuster, S.; Brillert, D.: Further Development of a Through-Flow Program by Considering Real Gas Equation of State. In: Conference Proceedings of the 5th European sCO2 Conference 2023, March 14-16, 2023, Prague, Czech Republic. DOI: 10.17185/duepublico/77266.
Doerr, T.; Schuster, S.; Brillert, D.: PDA Laser Measurements of Droplet-Laden Flows in a Four-Stage Axial Compressor. In: Journal of Turbomachinery 145 (2) 2023. DOI: 10.1115/1.4055767.
2022
Heinrich, C. R., Unglaube, T., Beirow, B., Brillert, D., Steff, K., & Petry, N.: . Surrogate Models for the Prediction of Damping Ratios in Coupled Acoustoelastic Rotor-Cavity Systems. In: Journal of Engineering for Gas Turbines and Power, 144(8), 081002. 2022 DOI: 10.1115/1.4054567
Hofer, M.; Ren, H.; Hecker, F.; Buck, M.; Brillert, D.; Starflinger, J.: Simulation, analysis and control of a self-propelling heat removal system using supercritical CO2 under varying boundary conditions. In: Energy 247, 2022. DOI: 10.1016/j.energy.2022.123500.
Tegethoff, K.; Schuster, S.; Brillert, D.: Numerical simulation of real gas one-component two-phase flow using a Roe-based scheme. In: Computers & Fluids 245, 2022. DOI: 10.1016/j.compfluid.2022.105560.
Hacks, A.; Hussein, I. A. E.; Haikun, R.; Schuster, S.; Brillert, D.: Experimental Data of Supercritical Carbon Dioxide (sCO₂) Compressor at Various Fluid States. In: Journal of Engineering for Gas Turbines and Power 2022, 144 (4). DOI: 10.1115/1.4052954.
Unglaube, T.; Brillert, D.: Acoustoelastic Modes in Rotor-Cavity Systems: An Overview on Frequency Shift Effects Supported with Measurements. In: International Journal Turbomachinery Propulsion and Power 2022. DOI: 10.3390/ijtpp7020015.
Wallat, S.; Musch, C.; Brillert, D.: Vortex-Generators Reduce the Dynamic Axial Forces in the Model of a Steam Turbine Control Valve. Proceedings of ASME Turbo Expo 2022, June 13-17, 2022, Rotterdam, The Netherlands. DOI: 10.1115/GT2022-80688.
Tiainen, J.; Schuster, S.; Turunen-Saaresti, T.; Mäki-Iso, M.; Brillert, D.: Hydrogen Compression — Towards a New Strategy for the Design of Hydrogen Compressors. Proceedings of ASME Turbo Expo 2022, June 13-17, 2022, Rotterdam, The Netherlands. DOI: 10.1115/GT2022-78626.
Dörr, T.; Yildiz, A.; Dolle, B.; Brillert, D.: An Euler-Based Throughflow Approach for Centrifugal Compressors – Part B: Experimental Investigations and Validation. Proceedings of ASME Turbo Expo 2022, June 13-17, 2022, Rotterdam, The Netherlands. DOI: 10.1115/GT2022-82114.
Jenzen, R.; Woiczinski, C.; Schuster, S.; Brillert, D.: An Euler-Based Throughflow Approach for Centrifugal Compressors – Part A: Extension and Modifications of Models. Proceedings of ASME Turbo Expo 2022, June 13-17, 2022, Rotterdam, The Netherlands. DOI: 10.1115/GT2022-82170.
Dörr, T.; Schuster, S.; Brillert, D.: PDA Laser Measurements of Droplet-Laden Flows in a Four Stage Axial Compressor. Proceedings of ASME Turbo Expo 2022, June 13-17, 2022, Rotterdam, The Netherlands. DOI: 10.1115/1.4055767.
Wallat, S.; Preibisch, S.; Strauch, M.; Brillert, D.: A Novel Test Rig Using Air for Investigation of Vibration and Interaction of Two Steam Turbine Control Valves. In: Journal of Engineering for Gas Turbines and Power, 144(1), 2022. DOI: 10.1115/1.4052160.
Knop, M,; Baack, T.; Hohmeier, B.; Di Brino, M.; Petrak, G.; Kamps, M.; Dohmen, H. J.; Benra, F.-K.: Entwicklung, Bau und erste Betriebserfahrungen eines optimierten Laufrads für Schmutzwasserpumpen. Erfolgreicher Kampf gegen die Verzopfung. In: Korrespondenz Abwasser, Abfall 2022, 5(69), 387-398. DOI: 10.3242/kae2022.05.003.
Schuster, S; Hacks, A.; Brillert, D.: Lessons from testing the sCO2-HeRo turbo-compressor-system. 7th International Supercritical CO2 Power Cycles Symposium February 21–24, 2022, San Antonio, Texas.
Lapp, F. F.; Schuster, S.; Hecker, S.; Brillert, D.: Experimental Validation of an Analytical Condensation Model for Application in Steam Turbine Design. In: International Journal Turbomachinery Propulsion and Power 2022, 7(1), 9. DOI: 10.3390/ijtpp7010009.
2021
Schoar, S.; Elspaß, A; Dohmen, H.-J.; Kleszczynski, S.; Benra, F.-K.: Design and fabrication of optimised aerostatic dry gas seals using advanced numerical models and next generation production technology. In: Polytechnic and Design 9(3), 156-166. DOI: 10.19279/TVZ.PD.2021-9-3-11.
Hacks, A.; Schuster, S.; Brillert, D.: Impact of volumetric system design on compressor inlet conditions in supercritical CO2 cycles. In: Journal of the Global Power and Propulsion Society, 5, 2021, 104-110. DOI: 10.33737/jgpps/140118.
Schröder, T.; Schuster, S.; Brillert, D.: Experimental Investigation of Centrifugal Flow in Rotor–Stator Cavities at High Reynolds Numbers > 108. In: International Journal of Turbomachinery, Propulsion and Power, 6(2), 2021, DOI: 10.3390/ijtpp6020013.
Dolle, B.: Experimenteller Beitrag zur verbesserten numerischen Simulation der turbulenten Strömung in Rückführkanälen mehrstufiger Radialverdichter, 2021, Universität Duisburg-Essen, Dissertation. DOI: 10.17185/duepublico/74012.
Heinrich, C. R.; Unglaube, T.; Beirow, B.; Brillert, D.; Steff, K.; Petry, N.: Surrogate Models for the Prediction of Damping Ratios in Coupled Acoustoelastic Rotor-Cavity Systems, Proceedings of ASME Turbo Expo 2021, June 7-11, 2021, Pittsburgh, USA. DOI: 10.1115/GT2021-58835.
Luo, J; Brillert, D.: Experimental Studies on Dry Gas Seals With Time-Resolved Film Thickness Measurements, Proceedings of ASME Turbo Expo 2021, June 7-11, 2021, Pittsburgh, USA. DOI: 10.1115/GT2021-58547.
Dörr, T.; Schuster, S.; Brillert D.: Evaluation of Performance Gain By Interstage Injection in a Four-Stage Axial Compressor, Proceedings of ASME Turbo Expo 2021, June 7-11, 2021, Pittsburgh, USA. DOI: 10.1115/GT2021-58560.
Barabas, B.; Benra, F.-K.; Petry, N.; Brillert, D.: Experimental Damping Behavior of Strongly Coupled Structure and Acoustic Modes of a Rotating Disk with Side Cavities, Proceedings of ASME Turbo Expo 2021, June 7-11, 2021, Pittsburgh, USA. DOI: 10.1115/GT2021-58782.
Wallat, S.; Preibisch, S.; Strauch, M.; Brillert, D.: A Novel Test Rig Using Air for Investigation of Vibration and Interaction of Two Steam Turbine Control Valves, Proceedings of ASME Turbo Expo 2021, June 7-11, 2021, Pittsburgh, USA. DOI: 10.1115/GT2021-58509.
Lapp, F. F.; Schuster, S.; Hecker, S.; Brillert, D.: Experimental Validation of an Analytical Condensation Model for the Improvement of Steam Turbine Design Regarding Flexibility Requirements, 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, April 12-16, 2021, Gdansk, Poland. DOI: 10.3390/ijtpp7010009.
Schröder, T. R.; Schuster, S.; Brillert, D.: Experimental Investigation of Centrifugal Flow in Rotor–Stator Cavities at High Reynolds Numbers > 108, 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, April 12-16, 2021, Gdansk, Poland. DOI: 10.3390/ijtpp6020013.
Schoar, S.; Elspaß, A.; Kleszczynski, S.; Dohmen, H. J.; Benra, F.-K.: Validation of a Numerical Model to Support the Design of Additively Manufactured Aerostatic Dry Gas Seals Carried out on a Test Bench Through Use of Seals with Defined Permeabilities, 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, April 12-16, 2021, Gdansk, Poland. DOI: 10.29008/ETC2021-541.
Hussein, I. A. E.; Schuster, S.; Brillert, D.: The effect of the isentropic exponent on the performance map of supercritical compressors with carbon dioxide as an example, 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, April 12-16, 2021, Gdansk, Poland. DOI: 10.29008/ETC2021-667.
Föllner, S.; Brillert, D.; Benra, F.-K.: An Euler-Based Throughflow Approach for an Axial Turbine at Supersonic FLow Regimes, 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, April 12-16, 2021, Gdansk, Poland. DOI: 10.29008/ETC2021-661.
Hofer, M.; Ren, H.; Hecker, F.; Buck, M.; Brillert, D.; Starflinger J.: Simulation and Analysis of a Self-Propelling Heat Removal System Using Supercritical CO2 at Different Ambient Temperatures, The 4th European sCO2 Conference, March 22-26, 2021, Prague, Czech Republic, DOI: 10.17185/duepublico/73943.
Hussein, I.A.E.; Schuster, S.; Brillert, D.: An Attempt for Establishing Pressure Ratio Performance Maps for Supercritical Carbon Dioxide Compressors in Power Applications, The 4th European sCO2 Conference for Energy Systems, March 22-26, 2021, Prague, Czech Republic, DOI: 10.17185/duepublico/73954.
Ren, H.; Hacks, A.; Schuster, S.; Brillert, D.: Mean-Line Analysis for Supercritical CO2 Centrifugal Compressors by Using Enthalpy Loss Coefficients, The 4th European sCO2 Conference for Energy Systems, March 22-26, 2021, Prague, Czech Republic. DOI: 10.17185/duepublico/73948.
Dörr, T.; Braun, S.; Schuster, S.; Brillert, D.: Proof of Concept for a Novel Interstage Injection Design in Axial Compressors. In: Journal of Engineering for Gas Turbines and Power, 143(6), 2021, DOI: 10.1115/1.4049306.
Luo, J.; Brillert, D.: Experimental Investigations on the Pressure Fluctuations in the Sealing Gap of Dry Gas Seals with Embedded Pressure Sensors. In: Journal of Engineering for Gas Turbines and Power, 143(3), 2021, DOI: 10.1115/1.4049662.
2020
Barabas, B.: Experimentelle Untersuchung von Fluid-Struktur Interaktionen in vereinfachten Radialverdichterradseitenräumen, 2020. Universität Duisburg-Essen. Dissertation.
Dörr, T.; Braun, S.; Schuster, S.; Brillert, D.: Proof of Concept for a Novel Interstage Injection Design in Axial Compressors, ASME: Turbomachinery Technical Conference & Exposition, September 21–25, 2020, DOI: 10.1115/GT2020-15807.
Föllner, S.; Amedick, V.; Bonhoff, B.; Brillert, D.; Benra, F.-K.: Model Validation of an Euler-Based 2D-Throughflow Approach for Multistage Axial Turbine Analysis, ASME: Turbomachinery Technical Conference & Exposition, September 21–25, 2020, DOI: 10.1115/GT2020-16229.
Hussein, I. A. E.; Hacks, A. J.; Schuster, S.; Brillert, D.: A Design Tool for Supercritical CO2 Radial Compressors Based on the Two-Zone Model, ASME: Turbomachinery Technical Conference & Exposition, September 21–25, 2020, DOI: 10.1115/GT2020-15248.
Lapp, F. F.; Hecker, S.; Schuster, S.; Brillert, D.: The Multi-Phase Flow Test Facility “EMMA” to Investigate Local Heat Transfer Coefficients and Liquid Water Films at Wet Steam Conditions, ASME: Turbomachinery Technical Conference & Exposition, September 21–25, 2020, DOI: 10.1115/GT2020-16307.
Luo, J.; Brillert, D.: Experimental Investigations on the Pressure Fluctuations in the Sealing Gap of Dry Gas Seals with Embedded Pressure Sensors, ASME: Turbomachinery Technical Conference & Exposition, September 21 – 25, 2020, DOI: 10.1115/GT2020-14464.
Schröder, T. R.; Schuster, S.; Brillert, D.: Prediction in Rotor-Stator Cavities at High Reynolds Numbers up to RE ~ 2×108 Towards a New Parametric Model, ASME: Turbomachinery Technical Conference & Exposition, September 21 – 25, 2020, DOI: 10.1115/GT2020-14010.
Schuster, S.; Dohmen, H. J.; Brillert, D.: Challenges of Compressing Hydrogen for Pipeline Transportation with Centrifugal-Compressors, Proceedings of Global Power and Propulsion Society (GPPS 2020), September 7-9, 2020, Chania, DOI: 10.33737/gpps20-tc-45.
Hacks, A.; Schuster, S.; Brillert, D.: Impact of Volumetric System Design on Compressor Inlet Conditions in Supercritical CO2 Cycles, Proceedings of Global Power and Propulsion Society (GPPS 2020), September 7-9, 2020, Chania, DOI: 10.33737/gpps20-tc-177.
Dolle, B.; Hermes, V.; Brillert, D.: Deficits in RANS Modelling in the U-Turn of a Multistage Centrifugal Compressor, Proceedings of Global Power and Propulsion Society, GPPS 2020, September 7-9, 2020, Chania, DOI: 10.33737/gpps20-tc-4.
Schröder, T. R.; Dohmen H. J.; Brillert D.; Benra F.-K.: Impact of Leakage Inlet Swirl Angle in a Rotor-Stator Cavity on Flow Pattern, Radial Pressure Distribution and Frictional Torque in a Wide Circumferential Reynolds Number Range. In: International Journal of Turbomachinery 2020, Propulsion and Power, 5(2), DOI:10.3390/ijtpp5020007.
Unglaube, T.; Chiang, H. W.-D.: Preliminary Design of Small-Scale Supercritical CO2 Radial Inflow Turbines. In: J. Eng. Gas Turbines Power 2020, 142(2), DOI: 10.1115/1.4045273.
2019
Hacks, A.; Freutel, T.; Strätz, M.; Vojacek, A.; Hecker, F.; Starflinger, J.; Brillert, D.: Operational Experiences and Design of the sCO2-HeRo Loop, 3rd European supercritical CO2 Conference. Sept. 19-20,2019, France, Paris, DOI: 10.17185/duepublico/48906.
von Deschwanden, I.; Braun, S.; Brillert, D.: Effect of Interstage Injection on Compressor Flow Characteristic. In Proceedings of the ASME - JSME - KSME Joint Fluids Engineering conference - AJKFLUIDS2019. July 28 - August 1, 2019, San Francisco, CA, USA.
Hacks, A. J.; Schuster, S.; Brillert, D.: Stabilizing Effects of Supercritical CO2 Fluid Properties on Compressor Operation. International Journal of Turbomachinery, Propulsion and Power 2019, 4(3), DOI:10.3390/ijtpp4030020.
Dolle, B.; Brillert, D.; Dohmen, H. J.; Benra, F.-K.: Experimental and Numerical Investigation on the Flow in a Return Channel of Multistage Centrifugal Compressors, Proceedings of ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition GT2019, June 17-21, 2019, Phoenix, Arizona, USA, DOI: 10.1115/GT2019-90455.
Schoar, S.; Dohmen, H.J.; Benra, F.-K.: Reliable Seals for Turbomachines: Numerical Analysis of the Effects of Compressible Fluid Flow Through Porous Materials and Narrow Gaps, 13th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics 2019, ETC 2019, Lausanne, Switzerland, DOI: 10.29008/ETC2019-303.
Schröder, T. R.; Dohmen, H. J.; Benra, F.-K.; Brillert, D.: Impact of Leakage Inlet Swirl Angle in a Rotor-Stator Cavity on Flow Pattern, Radial Pressure Distribution and Frictional Torque in a Wide Circumferential Reynolds Number Range, 13th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics 2019, ETC 2019, Lausanne, Switzerland.
Dolle, B.; Hermes, V.; Petry, N.; Brillert, D.; Dohmen H. J.; Benra, F.-K.: Investigation of Aerodynamic Effects in Stator Components of Multistage Centrifugal Compressors, 13th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics 2019, ETC 2019, Lausanne, Switzerland, DOI: 10.29008/ETC2019-431.
Hacks, A. J.; Schuster, S.; Brillert, D.: Stabilizing Effects of Supercritical CO2 Fluid Properties on Compressor Operation, 13th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics 2019, ETC 2019, Lausanne, Switzerland.
Strätz, M.; Starflinger J.; Mertz, R.; Brillert D.: Cycle Calculations of a Small-Scale Heat Removal System With Supercritical CO2 as Working Fluid, ASME Journal of Nuclear Engineering and Radiation Science 2019, 5(1), DOI : 10.1115/1.4039884.
2018
Hu, B.: Numerical and Experimental Investigation on the Flow in Rotor-Stator Cavities, 2018, Universität Duisburg-Essen, Dissertation, DuEPublico ID: 46600.
Schnitzler, J. P.: Untersuchung zum Betriebsverhalten von vielstufigen Axialverdichtern mit Wassereinspritzung, 2018, Universität Duisburg-Essen, Dissertation, Shaker Verlag.
Hacks, A.; Schuster, S.; Dohmen, H. J.; Benra, F.-K.; Brillert, D.: Turbomachine Design for Supercritical Carbon Dioxide within the sCO2-HeRo.EU Project, Journal of Engineering for Gas Turbines and Power 2018, 140(12), DOI:10.1115/1.4040861.
Starflinger, J.; Straetz, M.; Hacks, A.; Brillert, D.; Vojacek, A.; Hajek, P.: The Supercritical CO2 Heat Removal System - Status and Outlook, 12th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety, NUTHOS-12, October 14-18, 2018, Qingdao, China, DOI:10.17185/duepublico/47766.
Schuster, S.; Brillert, D.; Benra, F.-K.: Condensation in Radial Turbines – Part II: Application of the Mathematical Model to a Radial Turbine Series. Journal of Turbomachinery 2018, 140(10), DOI: 10.1115/1.4040935.
Schuster, S.; Brillert, D.; Benra, F.-K.: Condensation in Radial Turbines – Part I: Mathematical Modeling, Journal of Turbomachinery 2018, 140(10), DOI: 10.1115/1.4040934.
Domnick, C.; Brillert, D.: Flow Induced Steam Valve Vibrations – A Literature Review of Excitation Mechanisms, Preventive Measures and Design Improvements, Journal of Engineering for Gas Turbines and Power 2018, DOI: 10.1115/1.4041253.
Vojacek, A.; Hacks, A. J.; Melichar, T.; Frybort, O.; Hájek, P.: Challenges in supercritical CO2 power cycle technology and first operational experience at CVR, 2nd European supercritical CO2 Conference, August 30-31, 2018, Essen, Germany, DOI: 10.17185/duepublico/46075.
Hacks, A.; Vojacek, Ales; Dohmen, H. J.; Brillert, D.: Experimental Investigation of the sCO2-HeRo Compressor, 2nd European supercritical CO2 Conference, August 30-31, 2018, Essen, Germany, DOI:10.17185/duepublico/46088.
Hacks, A.; Brillert, D.: Scaling Considerations for the Application of the sCO2-HeRo System in Nuclear Power Plants, 2nd European supercritical CO2 Conference, August 30-31, 2018, Essen, Germany, DOI:10.17185/duepublico/46089.
Hu, B.; Brillert, D.; Dohmen, H. J.; Benra, F.-K.: Investigation on Thrust and Moment Coefficients of a Centrifugal Turbomachine, International Journal of Turbomachinery, Propulsion and Power 2018, 3(2), 9, DOI:10.3390/ijtpp3020009.
Barabas, B.; Brillert, D.; Dohmen, H. J.; Benra, F.-K.: Damping Behavior of Acoustic Dominant Modes in an Aeroacoustic Test Rig Representing a Simplified Geometry of a High Pressure Radial Compressor, Proceedings of ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT2018, June 11-15, 2018, Lillestrom, Norway, DOI:10.1115/GT2018-76629.
Hacks, A.; Schuster, S.; Dohmen, H. J.; Benra, F.-K.; Brillert, D.: Turbomachine Design for Supercritical Carbon Dioxide Within the SCO2-HeRo.EU Project, Proceedings of ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT2018, June 11-15, 2018, Lillestrom, Norway, DOI:10.1115/1.4040861.
Luo, J.; Dohmen, H.; Benra, F.-K.: Coupled Thermal-Structural-Fluid Numerical Analysis of Gas Lubricated Mechanical Seals, Proceedings of ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT2018, June 11-15, 2018, Lillestrom, Norway, DOI:10.1115/GT2018-75458.
Schuster, S.; Brillert, D.; Hermes, V.; Yildiz, A.; Benra, F.-K.: Thermodynamic Modelling Aspects of Wet Compression in Radial Compressors, Proceedings of ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT2018, June 11-15, 2018, Lillestrom, Norway, DOI: 10.1115/GT2018-76429.
Wallat, S.; Domnick, C. B.; Musch, C.; Brillert, D.: A Test Rig Concept to Study Fluid Structure Interactions in a Steam Turbine Valve, Proceedings of ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT2018, June 11-15, 2018, Lillestrom, Norway, DOI: 10.1115/GT2018-75094.
2017
Hu, B.; Brillert, D.; Dohmen, H. J.; Benra, F.-K.: Investigation on the Flow in a Rotor-Stator Cavity with Centripetal Through-Flow, International Journal of Turbomachinery, Propulsion and Power 2017, 2(4), 18, DOI:10.3390/ijtpp2040018.
Schuster, S.; Brillert, D.; Martens, U.; Hermes, V.; Benra, F.-K.: Investigation of the evaporation process of liquefied hydrocarbons in front of a compressor, 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, Maui, Hawaii, USA.
Hu, B.; Brillert, D.; Dohmen, H. J.; Benra, F.-K.: Investigation on thrust and moment coefficients of a centrifugal turbomachine, 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, Maui, Hawaii, USA.
Barabas, B.; Brillert, D.; Dohmen, H. J.; Benra, F.-K.: The Behavior of the Modal Properties of Weak and Strong Coupled Acoustic Modes at Different Pressure Levels in a Rotor-Stator Test Rig, 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, Maui, Hawaii, USA.
Schütz, J.; Dohmen, H. J.; Brillert, D.: Numerical investigation of Droplet dispersion in resting environment, cross flow and parallel flow, 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, Maui, Hawaii, USA.
Hu, B.; Brillert, D.; Dohmen, H. J.; Benra, F.-K.: Investigation on the influence of surface roughness on the moment coefficient in a Rotor-Stator Cavity with centripetal through-flow, Proceedings of the ASME 2017; Fluids Engineering Division Summer Meeting, FEDSM2017, Waikoloa, Hawaii, USA.
von Deschwanden, I.; Benra, F.-K.; Dohmen, H. J.; Brillert, D.: PDA measurements in sprays generated by twin-jet-nozzles, Proceedings of the ASME 2017; Fluids Engineering Division Summer Meeting, FEDSM2017, Waikoloa, Hawaii, USA. DOI: 10.1115/FEDSM2017-69003.
Schuster, S.; Kreischer, C.; Brillert, D.: Introduction of an integrated Turbo-Electrical Machine, Turbomachinery Technical Conference and Exposition GT2017, Proceedings of ASME Turbo Expo 2017, Charlotte, NC, USA. DOI: 10.1115/GT2017-63526.
Strätz, M.; Starflinger, J.; Mertz, R.; Seewald, M.; Schuster, S.; Brillert, D.: Cycle Calculations of a Small-Scale Heat Removal System with Supercritical CO2 as Working Fluid, Proceedings of the 2017 25th International Conference on Nuclear Engineering ICONE25. July 2-6, 2017, Shanghai, China, DOI: 10.1115/ICONE25-66084.
von Deschwanden, I.; Benra, F.-K.; Dohmen, H. J.; Brillert, D.: Zweistrahldüsen – Genauigkeit der Bestimmung von Tropfendurchmessern mit Phasen-Doppler Anemometrie, 1st Symposium on Turbomachinery Test Facilities, 2017, Bochum, Deutschland.
Domnick, C.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.; Musch C.: Clarifying the Physics of Flow Separations in Steam Turbine Inlet Valves at Part Load Operation and Improved Design Considerations, Journal of Fluids Engineering Vol. 139(8), February 2017, DOI 10.1115/1.4036263.
Hu, B.; Brillert, D.; Dohmen, H. J.; Benra, F.-K.: Investigation on the flow in a Rotor-Stator Cavity with centripetal through-flow, 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics 2017, ETC2017, Stockholm, Sweden. DOI: 10.3390/ijtpp2040018.
Barabas, B.; Brillert, D.; Dohmen, H. J.; Benra, F.-K.: Identification of coupled natural frequencies in a Rotor-Stator Test-Rig for different gas properties, 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics 2017, ETC2017-057, Stockholm, Sweden. DOI: 10.29008/ETC2017-057.
Schuster, S.; Benra, F.-K.; Brillert, D.: Droplet deposition in radial turbines, European Journal of Mechanics - B/Fluids Volume 61, Part 2, Pages 289–346, Rotating Flows, January-February 2017, DOI 10.1016/j.euromechflu.2016.09.002.
Domnick, C.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.; Musch C.: Correlation for prediction of dynamic fluid forces in steam turbine inlet valves, GPPF Global Power and Propulsion Forum 2017, GPPF-2017-5, Zürich, Switzerland.
Domnick, C.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.; Musch C.: Investigation on Flow Induced Vibrations of a Steam Turbine Inlet Valve Considering Fluid Structure Interaction Effects, Journal of Engineering for Gas Turbines an Power Volume 139 (2), February 2017, DOI 10.1115/1.4034352.
Starflinger, J.; Brillert, D.; Frybort, P.; Hajek, P.; Hennink, A.; Freutel, T.: Raising Nuclear Reactor Safety to a Higher Level - The Supercritical CO2 Heat Removal System - "sCO2-HeRo", 26th International Conference Nuclear Energy for New Europe, Bled, Slovenia. DOI: 10.17185/duepublico/47766.
2016
Domnik, C.: Untersuchung des strömungs- und strukturdynamischen Verhaltens von Dampfturbineneinlassventilen im Teillastbetrieb, 2016, Universität Duisburg-Essen, Dissertation, DuEPublico ID: 43414.
Schuster, S.; Benra, F.-K.; Brillert, D.: Reliability of condensation models for droplet deposition calculations in radial turbines, WSCP16, Wet Steam Conference 2016, Prague, Czech Republic.
Dolle, B.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.: An educational laboratory with a remote controlled centrifugal pump test rig, Proceedings of the ASME 2016 Fluids Engineering Division Summer Meeting, FEDSM2016-7557, Washington, DC, USA, DOI: 10.1115/FEDSM2016-7557.
→ deutsche Fassung (ab S. 321)
Kefalas, A.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.: Parametric Study of a Novel Groove Design for Dry Gas Seals, 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 2016, Costa del Sol, Malaga, Spain.
Kefalas, A.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.: Comparison of different numerical approaches for determination of compressible fluid flow in narrow gaps, ASME Turbo Expo, Turbine Technical Conference and Exposition, GT2016, GT2016-57898, Seoul, South Korea, DOI 10.1115/GT2016-57898.
Domnick, C. B.; Benra, F.-K.; Brillert, D.; Musch, C.; Dohmen, H. J.: Investigation on Flow Induced Vibrations of a Steam Turbine Inlet Valve Considering Fluid Structure Interaction Effects, ASME Turbo Expo, Turbine Technical Conference and Exposition, GT2016, GT2016-56314, Seoul, South Korea, DOI 10.1115/GT2016-56314.
Domnick, C. B.; Brillert, D.; Dohmen, H. J.; Musch C.; Benra, F.-K.: Innovative simulation techniques to determine dynamic forces in steam turbine inlet valves, Symposium on Innovative Simulations in Turbomachinery Isim-T16, 2016, Regensburg, Germany.
Hu, B.; Benra, F.-K.; Lu, W.; Dohmen, H. J.: Investigation on solid-liquid flow in the rear chamber of multi-stage slurry pumps with leakage flow, 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2016, Honolulu, Hawaii, USA.
Schuster, S.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.: Droplet deposition in radial turbines, 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2016, Honolulu, Hawaii, USA.
Schuster, S.; Benra, F.-K.; Brillert, D.: Small scale sCO2 compressor impeller design considering real gas conditions, 5th International sCO2 Power Cycles Symposium, Supercritical CO2 Power Cycles Symposium 2016, San Antonio, Texas, USA.
Benra, F.-K.; Brillert, D.; Frybort, P.; Hajek, P.; Rohde, M.; Schuster, S; Seewald, M.; Starflinger, J.: A supercritical CO2 low temperature Brayton-cycle for residual heat removal, 5th International sCO2 Power Cycles Symposium, Supercritical CO2 Power Cycles Symposium, 2016, San Antonio, Texas, USA.
von Deschwanden, I.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.: Droplet evaporation in the context of interstage injection, 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2016, Honolulu, Hawaii, USA.
von Deschwanden, I.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.: Untersuchung des Sprayverhaltens zweier aufeinandertreffender Wasserstrahlen mittels Phasen-Doppler-Anemometrie, 12. Tagung Technische Diagnostik 2016, Hochschule Merseburg, Selbstverlag An-Institut Fluid- und Pumpentechnik Merseburg, Deutschland.
Domnick, C. B.; Benra, F.-K.; Brillert, D. Dohmen, H. J.; Musch C.: Modification of a steam valve diffuser for enhanced full load and part load operation using numerical methods, 16th International Conference on Fluid Flow Technologies, Periodica Polytechnica Mechanical Engineering, Vol. 60(3), April 2016, DOI 10.3311/PPme.9041.
Benra, F.-K.; Brillert, D.; Frybort, P.; Hajek, P.; Rohde, M.; Schuster, S; Seewald, M.; Starflinger, J.: The supercritical CO2 heat removal system - sCO2-Hero, 1st European Seminar on Supercritical CO2 (SCO2) Power Systems, September 2016, Vienna, Austria.
2015
Schuster, S.: Untersuchung der Entstehung und Bewegung von Flüssigkeitsansammlungen auf Radialturbinenlaufradschaufeln mit einem erweiterten Navier-Stokes-Löser, 2015, Universität Duisburg-Essen, Dissertation, Shaker Verlag.
Domnick, C. B.; Benra, F.-K.; Brillert, D; Dohmen, H. J.; Musch C.: Modification of a steam valve diffuser for enhanced full load and part load operation using numerical methods, 16th International Conference on Fluid Flow Technologies, Conference on Modelling Fluid Flow Technologies 2015, CMFF15, Budapest; Hungary, DOI 10.3311/PPme.9041.
Domnick, C. B.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.; Musch C.: Numerical investigation on the vibration of steam turbine inlet valves and the feedback to the dynamic flow field, ASME Turbo Expo 2015, Turbine Technical Conference and Exposition, GT2015, GT2015-42182, Montreal, Canada, DOI 10.1115/GT2015-42182.
Hu, B.; Benra, F.-K.; Lu, W.: Investigation on the solid-liquid flow in the rear chamber of a submersible multi-stage slurry pump, 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics 2015, ETC11, ETC2015-171, Madrid, Spain.
Barabas, B.; Clauss, S.; Schuster, S; Benra, F.-K.; Brillert, D.; Dohmen, H. J.: Experimental and numerical determination of pressure and velocity distribution inside a rotor-stator cavity at very high circumferential Reynolds numbers, 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ETC11, ETC2015-097, Madrid, Spain, ISBN: 978-000000000-2.
Domnick, C. B.; Benra, F.-K.; Brillert, D. Dohmen, H. J.; Musch C.: Improving the design of steam turbine inlet valves by numerical methods for enhanced part load operation, 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics 2015, ETC11, ETC2015-107, Madrid, Spain.
Domnick, C. B.; Benra, F.-K.; Brillert, D. Dohmen, H. J.; Musch C.: Numerical Investigation of the Fluid and Structure Dynamics of a Steam Turbine Inlet Valve at Different Operation Conditions, VKI Workshop on Safety and Control Valves, von Kármán Institute, 2015, Sint-Genesius-Rode, Belgium.
Domnick, C. B.; Benra, F.-K.; Brillert, D.; Dohmen, H. J.; Musch C.: Numerical Investigation on the Time-Variant Flow Field and Dynamic Forces Acting in Steam Turbine Inlet Valves, Journal of Engineering for Gas Turbines and Power 137 (8), 081601, DOI 10.1115/GT2014-25632.
Feng, J.; Luo, X.; Benra, F.-K.; Dohmen H. J.: Experimental investigation of velocity fluctuations in a radial diffuser pump, Journal of Hydrodynamics, Ser. B, 081601, DOI 10.1016/S1001-6058(15)60490-5.
2014
Rabs, M.: Numerische Untersuchung des Einflusses von Strömungsinstabilitäten auf den Heißgaseinzug in Gasturbinen Kavitäten unter Verwendung optimierter Rechenmodelle, 2014, Universität Duisburg-Essen, Dissertation, Verlag Dr. Hut.
Zwingenberg, M.: Teilautomatisierte Erstellung und Anpassung von Komponenten-Kennfeldern für Gasturbinen mit Hilfe von Betriebsdaten-Auswertung und numerischen Näherungsverfahren, 2014, Universität Duisburg-Essen, Dissertation, DuEPublico ID: 38850.
Schuster, S.; Benra, F.-K.; Dohmen, H. J.; König S.; Martens, U.: Sensitivity of condensation calculations on model coefficients with respect to turbo machinery applications, 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2014, ISROMAC-15, Honolulu, Hawaii, USA.
Domnick, C. B.; Benra, F.-K.; Dohmen, H. J.; Musch C.: Numerical Investigation on Under Expanded Wall Jet Separation in a Steam Turbine Valve Diffuser, 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2014, ISROMAC-15, Honolulu, Hawaii, USA.
Kefalas, A.; Benra, F.-K.; Dohmen, H. J.: Numerical analysis of compressible fluid flow in narrow gaps, ASME 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels 2014, FEDSM 2014, Chicago, Illinois, USA, DOI: 10.1115/FEDSM2014-22002.
Dohmen, H. J.; Schepers, C.; Schuster, S.; Benra, F.-K.: Analyze of the size of secondary droplets due to film separation at the blade trailing edge, ASME 4th Joint US-European Fluids Engineering Division Summer Meeting, FEDSM 2014, Chicago, USA, DOI: 10.1115/FEDSM2014-21128.
Schuster, S.; Benra, F.-K.; Dohmen, H. J.; König S.; Martens, U.: Sensitivity Analysis of Condensation Model Constants on Calculated Liquid Film Motion in Radial Turbines, Proceedings of ASME Turbo Expo 2014, Turbine Technical Conference and Exposition 2014, GT 2014, Düsseldorf, Germany, DOI 10.1115/GT2014-25652.
Domnick, C. B.; Benra, F.-K.; Dohmen, H. J.; Musch C.: Numerical investigation of the time-variant flow field and dynamic forces acting in steam turbine inlet valves, ASME Turbo Expo 2014, GT 2014, Düsseldorf, Germany, DOI 10.1115/1.4029309.
Schnitzler, J. P.; von Deschwanden, I.; Clauss, S. Benra, F.-K.; Dohmen, H. J.; Werner. K.: Experimental determination of a four stage axial compressor map operating in wet compression, Proceedings of ASME Turbo Expo 2014, Turbine Technical Conference and Exposition 2014, GT 2014, Düsseldorf, Germany, DOI 10.1115/GT2014-26807.
Domnick, C. B.; Benra, F.-K.; Dohmen, H. J.; Musch C.: Instationäre Strömung in Dampfturbineneinlassventilen, Workshop - Instationäre Aerodynamik und Aeroelastik in Turbomaschinen, Bochum, Deutschland.
Schnitzler, J. P.; von Deschwanden, I.; Benra, F.-K.; Dohmen, H. J.: Experimentelle Untersuchung eines 4-stufigen Axialverdichters bei „Nassverdichtung“ Kolloquium - Fluidenergiemaschinen, 2014, Bochum, Deutschland.
Feng, J.; Benra, F.-K.; Luo, X.: Experimental Investigation on Turbulence Fields in a Radial Diffuser Pump Using PIV Technique, Hindawi Publishing Corporation, Advances in Mechanical Engineering 2014, 6(0), DOI: http://dx.doi.org/10.1155/2014/702318.
Benra, F.-K.; Dohmen, H. J.; Clauss, S.; Sehrt, J. T.; Witt, G.: Flow Characteristics of Porous Metal Structures for Specified Permeability Manufactured by Laser Beam Melting Technology, Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition 2014, IMECE2014, 2014, Montreal, Canada, DOI: 10.1115/IMECE2014-39672.
Benra, F.-K.; Schnitzler, J. P.: Strömungsdiagnostik in Mehrphasenströmungen am Lehrstuhl für Strömungsmaschinen der Universität Duisburg-Essen, 11. Tagung Technische Diagnostik, Hochschule Merseburg, Selbstverlag An-Institut Fluid- und Pumpentechnik Merseburg, Deutschland, ISBN: 978-3-942703-26-0.
2013
Wan, B.; Benra, F.-K.; Dohmen, H. J.: A novel numerical scheme for a scale-invariant form of equation of motion: development of solver and application to engineering flow problems, International Journal of Energy and Power Engineering 2013, 2(2), 37-45, DOI: 10.11648/j ijepe.20130202.12.
Wan, B.; Benra, F.-K.; Dohmen, H. J.: Unique Numerical Scheme for a Modified Equation of Fluid Motion: Approaching New Solver Development to a Fundamental Flow Problem, Science Journal of Physics 2013, DOI 10.7237/sjp/231.
Wan, B.; Benra, F.-K.; Dohmen, H. J.: Application of a new numerical solver to turbomachinery flow problems, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 2013, 227(6), 628-636. DOI 10.1177/0957650913497359.
Clauss, S.; Schnitzler, J.P.; Barabas, B.; Nagabhushan, P.S.; Benra, F.-K.; Dohmen, H. J.: Test rig design to explore water droplet behavior in a four stage axial compressor, Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013, San Diego, USA, DOI 10.1115/IMECE2013-63429.
Schnitzler, J.P.; Muders, C.; Kefalas, A.; Benra, F.-K.; Dohmen, H. J.: Verbesserung der Ergebnisqualität eines laserbasierten optischen Messverfahrens zur Bestimmung der Tropfendurchmesser eines Wassersprays in einem zylindrischen Messvolumen, Lasermethoden in der Strömungsmesstechnik. 21. Fachtagung, GALA 2013, München.
Rosetti, A.; Nagabhushan, P.S.; Barabas, B.; Schnitzler, J.P.; Kefalas, A.; Benra, F.-K.; Dohmen, H. J.: Use of Euler free surface flow analysis to provide appropriate injection conditions in Euler-Lagrange numerical models, Proceedings of Wessex Multiphase Flow 2013, A Coruña, Spain, DOI 10.2495/MPF130041.
Petry, N.; König, S.; Benra, F.-K.: Influence of the Swirling Flow in the Side Cavities of a High-Pressure Centrifugal Compressor on the Characteristics of Excited Acoustic Modes, ASME Journal of Turbomachinery 2013, 135(3), DOI: 10.1115/1.4007544.
Barabas, B.; Schnitzler, J.P.; Nagabhushan, P.S.; Kefalas, A.; Benra, F.-K.; Dohmen, H. J.: 1D Model for Water Droplet Evaporation at Elevated Gas Pressure and Temperature Levels with a Rosin-Rammler Droplet Distribution, Proceedings of 11th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows 2013, ISAIF 2013, Shenzhen, China.
Nagabhushan, P.S.; Rosetti, A.; Barabas, B.; Schnitzler, J.P.; Kefalas, A.; Benra, F.-K.; Dohmen, H. J.: Experimental Validation of Methods Providing Boundary Conditions to Simulate the Evaporation Process of Water Injected into High Speed Air Flow, Proceedings of ASME Turbo Expo 2013, GT2013-94966, San Antonio, USA, DOI 10.1115/GT2013-94966.
Wan, B.; Benra, F.-K.; Dohmen, H. J.: Application of a new numerical solver to turbomachinery flow problems, Paper No. 042, Conference Proceedings. Tenth European Conference on Turbomachinery Fluid Dynamics and Thermodynamics 2013, ETC 2013, Lappeenranta, Finland. DOI: 10.1177/0957650913497359.
2012
Wan, B.: Development of numerical algorithm based on a modified equation of fluid motion with application to turbomachinery flow, 2012, Universität Duisburg-Essen, Dissertation, Shaker Verlag.
Barabas, B.; Kefalas, A.; Schnitzler, J. P.; Rossetti, A.; Benra, F.-K.; Dohmen, H. J.: Water Droplet Evaporation at High Gas Pressure and Temperature Levels – Comparison of Experimental Results with a One-Dimensional Simulation, Computational Thermal Sciences: An International Journal 2013, 5(3), 215-226, DOI 10.1615/ComputThermalScien.2013006358.
Pei, J.; Yuan, S.; Benra, F.-K.; Dohmen, H. J.: Numerical Prediction of Unsteady Pressure Field Within the Whole Flow Passage of a Radial Single-Blade Pump, ASME, Journal of Fluids Engineering 2012, 134(10), DOI: 10.1115/1.4007382.
Schnitzler, J. P.; Nagabhushan, P.; Kefalas, A.; Barabas, B.; Benra, F.-K.; Dohmen H. J.: Experimentelle und numerische Untersuchung der Verdampfung von Wassertropfen bei variablen Druck- und Temperaturbedingungen, 10. Tagung Technische Diagnostik, An-Institut Fluid- und Pumpentechnik Merseburg, Selbstverlag, ISBN 978-3-942703-13-0.
Kefalas, A.; Schnitzler, J.P.; Barabas, B.; Benra, F.-K.; Dohmen, H. J.: Experimentelle Untersuchungen zum Verdampfungsprozess von Wassertropfen bei hohen Druck- und Temperaturniveaus, Fachtagung “Lasermethoden in der Strömungsmesstechnik”, 2012, Rostock, ISBN 978-3-9805613-8-9.
Schuster, S.; Benra, F.-K.; Dohmen, H. J.: Influence of Different Gas Models on the Numerical Results of High-Velocity Condensation, Conference on Modelling Fluid Flow (CMFF’12), 15th International Conference on Fluid Flow Technologies 2012, Budapest, Hungary, ISBN 978-963-08-4588-5.
Barabas, B.; Kefalas, A.; Schnitzler, J. P.; Dohmen, H. J.; Benra, F.-K.: Water Droplet Evaporation at High Pressure and Temperature Levels: Part II: Comparison of Experimental Results With a 1D Simulation, 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2012, Malta.
Kefalas A.; Barabas B.; Schnitzler J.P.; Benra F.-K.; Dohmen H. J.: Water Droplet Evaporation at High Pressure and Temperature Levels: Part I: Experimental Investigations of the Spray Pattern in Dependence on Parameter Variation, HEFAT2012, 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malta.
Dohmen, H. J.; Benra, F.-K.; Brinkhorst, S.: Improvement of Axial-Flow Pump Part Load Behavior by a Double Inlet Nozzle, Proceedings of the ASME 2012 Fluids Engineering Summer Meeting, FEDSM2012-72211, Rio Grande, Puerto Rico, DOI 10.1115/FEDSM2012-72211.
Schuster, S.; Dohmen, H. J.; Benra, F.-K.: Numerical Simulation of a Micro Pelton Turbine Working in the Two-Phase Flow Regime, Proceedings of the ASME 2012 Fluids Engineering Summer Meeting, FEDSM 2012, Rio Grande, Puerto Rico. DOI: 10.1115/FEDSM2012-72039.
Pei, J.; Dohmen, H. J.; Yuan, S.-Q.; Benra, F.-K.: Investigation of unsteady flow-induced impeller oscillations of a single-blade pump under off-design conditions, Journal of Fluids and Structures 2012, 35, 89–104, DOI 10.1016/j.jfluidstructs.2012.08.005.
Rabs, M.; Benra, F.-K.; Schneider, O.: Emergence of Kelvin-Helmholtz instabilities in gas turbine rim cavities – A parameter study, Proceedings of ASME Turbo Expo 2012, GT 2012, Copenhagen, Denmark. DOI: 10.1115/GT2012-68834.
Petry, N.; König, S.; Benra, F.-K.: Influence of the Swirling Flow in the Side Cavities of a High-Pressure Centrifugal Compressor on the Characteristics of Excited Acoustic Modes, Proceedings of ASME Turbo Expo 2012, GT 2012, Copenhagen, Denmark. DOI: 10.1115/1.4007544.
Zwingenberg, M.; Dobrzynski, B.; Klumpp, S.; Werner, K.; Benra, F.-K.: Generation of Gas Turbine Component Maps on Basis of Operational Data, Proceedings of ASME Turbo Expo 2012, GT 2012, Copenhagen, Denmark. DOI: 10.1115/GT2012-68776.
Schnitzler, J.-P.; Feng, J., Benra, F.-K.; Dohmen, H. J.; Werner, K.: Test Rig Design for Investigations of Water Droplet Evaporation at High Pressure and Temperature Levels, 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2012, ISROMAC-14, Honolulu, HI, USA.
Rabs, M.; Benra, F.-K.; Dohmen, H. J.; Lock, G.-D.; Schneider, O.: Model Simplifications for Numerical Simulations of Ingestion Through Gas Turbine Rim Seals, 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2012, ISROMAC-14, Honolulu, HI, USA.
Will, B.-Ch.; Benra, F.-K.; Dohmen, H. J.: Investigation of the Flow in the Impeller Side Clearances of a Centrifugal Pump with Volute Casing, Journal of Thermal Science 2012, 21(3), 197−208, DOI 10.1007/s11630-012-0536-3.
Martha, A.; Sehrt, J. T.; Benra, F.-K.; Köhler, P.: Auslegung, Konstruktion und Fertigung von strömungsmechanischen Funktionsprototypen mittels Rapid Manufacturing, RTejournal - Forum für Rapid Technologie 2012, 9.
2011
Will, B.: Theoretical, numerical and experimental investigation of the flow in rotor stator cavities with application to a centrifugal pump, 2011, Universität Duisburg-Essen, Dissertation, DuEPublico ID: 26782.
Deckers, K.: Beitrag zur Berechnung der Kühlluftströmung in Vordrallsystemen von Gasturbinen, 2011, Universität Duisburg-Essen, Dissertation, Verlag im Internet GmbH.
Petry, N.: Experimentelle Untersuchung aeroakustischer und aeroelastischer Phänomene in Hochdruck-Radialverdichtern, 2011, Universität Duisburg-Essen, Dissertation, DuEPublico ID: 27385.
Rabs, M.; Benra, F.-K.; Domnick, C.; Schneider, O.: Computational Study of Kelvin-Helmholtz Instability created by Interaction of the Mainstream Flow and the Seal Flow in Gas Turbines, ASME Turbo Expo 2011, GT 2011, Vancouver, Canada, DOI: 10.1115/GT2011-45284.
Schuster, S.; Benra, F.-K.; Dohmen, H. J.: Investigation of nucleation influence on the efficiency of radial turbines, 12th International Conference on Multiphase Flow in Industrial Plants 2011, MFIP12, Ischia, Italy.
Dohmen, H. J.; Schnitzler, J. Ph.; Benra, F.-K.: Efficiency Augmentation of Gas Turbine Cycles, 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 2011, Pointe Aux Piments, Mauritius.
Will, B.-Ch.; Benra, F.-K.; Dohmen, H. J.: Investigation of the Flow in the Side Chambers of a Centrifugal Pump with Volute Casing, Proceedings of the 10th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows 2011, Brussels, Belgium.
Will, B.-Ch., Benra, F.-K.; Dohmen, H. J.: Investigation of the flow in the impeller side clearances of a centrifugal pump with volute casing, Journal of Thermal Science 21, 197–208 (2012), DOI: 10.1007/s11630-012-0536-3.
Wan, B.; Benra, F.-K.; Dohmen, H. J.: A New Numerical Scheme for a Modified Equation of Fluid Motion: Solver Development and Application to a Fundamental Flow Problem, WSEAS, Transactions on Fluid Mechanics.
Benra, F.-K.: Untersuchung der Strömungsinstabilitäten im Teillastbereich von Axialpumpen, Delta 2011, 17( 3), 42.
Benra, F.-K.: Radialturbinen für die Restwärmeverwertung, Ingenieurspiegel 2011, 3, 48-49.
Pei, J., Dohmen, H. J., Yuan, S. Q., & Benra, F.-K.: Investigation of unsteady flow-induced impeller oscillations of a single-blade pump under off-design conditions. Journal of Fluids and Structures, 35, 89–104, DOI: 10.1016/j.jfluidstructs.2012.08.005.
Pei, J.; Benra, F.-K.; Dohmen, H. J.: Application of Different Strategies of Partitioned Fluid-Structure Interaction Simulation for a Single-Blade Pump Impeller, Proceedings of the Institution of Mechanical Engineers, Part E, Journal of Process Mechanical Engineering 2012, 226(4), 297-308, DOI: 10.1177/0954408911432974.
Benra, F.-K.; Dohmen, H. J.; Pei, J.; Schuster, S.; Wan, B.: A Comparison of One-Way and Two-Way Coupling Methods for Numerical Analysis of Fluid-Structure Interactions, Journal of Applied Mathematics 2011, DOI 10.1155/2011/853560.
Feng, J..; Benra, F.-K.; Dohmen, H. J.: Investigation of Periodically Unsteady Flow in a Radial Pump by CFD Simulations and LDV Measurements, ASME Journal of Turbomachinery 2011, 133(1), DOI: 10.1115/1.4000486.
2010
Schuster, S.; Benra, F.-K.; Dohmen, H. J.: Application of Euler-Euler Model for Numerical Simulation of a Radial Turbine Working in the Two-Phase Flow Regime, WSEAS Transactions on Fluid Mechanics 2010, 5(4), 276-286, ISSN: 1790-5087.
Schuster, S.; Benra, F.-K.; Dohmen, H. J.; Fagerli, B.: Numerical simulation of two phase flow in a Pelton turbine with Eulerian-Eulerian method, 8th ANSYS & FZD Multiphase Flows Short Course and Workshop, Dresden, June 2010.
Petry, N.; Benra, F.-K.: The technique of dithering—a parameter study, MEASUREMENT SCIENCE AND TECHNOLOGY 2011, 22(2), DOI 10.1088/0957-0233/22/2/025401.
Feng, J.; Benra, F.-K; Dohmen, H. J.: Unsteady Flow Investigation in Rotor-Stator Interface of a Radial Diffuser Pump, Forschung im Ingenieurwesen 2010, 74(4), 233–242, DOI 10.1007/s10010-010-0121-4.
Feng, J.; Benra, F.-K.; Dohmen, H. J.: Application of Different Turbulence Models in Unsteady Flow Simulations of a Radial Diffuser Pump, Forschung im Ingenieurwesen 2010, 74(3), 123-133, DOI: 10.1007/s10010-010-0121-4.
Zwingenberg, M.; Benra, F.-K.; Werner, K.: Entwicklung und Tuning eines Mehr-Fehler-Isolators für die thermodynamische Diagnose von Gasturbinen, 9. Tagung Technische Diagnostik, Tagungsband Selbstverlag An-Institut Fluid- und Pumpentechnik Merseburg, ISBN: 978-3-9811266-1-4, Merseburg, Oktober 2010.
Benra, F.-K.; Dohmen, H. J.: A Closed Loop Approach to Simulate the Unsteady Three-Dimensional Flow in an Axial Flow Pump, Proceedings of FEDSM-ICNMM2010 2010, ASME Fluids Engineering Conference, August 2010, Montreal, Canada, DOI: 10.1115/FEDSM-ICNMM2010-30484.
Wan, B.; Benra, F.-K.; Dohmen, H. J.: Application of a New Numerical Solver for the Scale-Invariant Form of the Equation of Motion to Engineering Flow Problems, 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2010, July 2010, Antalya, Turkey.
Petry, N.; Benra, F.-K.; König. S.: Experimental Study of Acoustic Resonances in the Side Cavities of a High-Pressure Centrifugal Compressor Exited by Rotor/Stator Interaction, Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, GT2010, June 2010, Glasgow, UK, DOI: 10.1115/GT2010-22054.
Zwingenberg, M.; Benra, F.-K.; Werner. K.; Dobrzynski. B.: Generation of Turbine Maps Using a Fusion of Validated Operational Data and a Streamline Curvature Method, Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, GT2010, June 2010, Glasgow, UK, GT2010-22738, DOI: 10.1115/GT2010-22738.
Will, B.; Benra, F.-K.; Dohmen, H. J.: Numerical and Experimental Investigation of the Flow in the Side Cavities of a Centrifugal Pump, The 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC13-2010-0002, Honolulu, Hawaii, April 2010.
Zwingenberg, M.; Benra, F.-K.; Werner, W.: [121]: Validation of Operational Gas Turbine Data Using a Model Based Approach, The 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC13-2010-0001, Honolulu, Hawaii, April 2010.
2009
Feng, J.: Numerical and Experimental Investigations on Rotor-Stator Interaction in Radial Diffuser Pumps, 2009, Universität Duisburg-Essen, Dissertation, Shaker Verlag.
Hirschberger, M.; J. Kuhlmann, J.; Benra, F-K.: Water & wastewater: Designing high-power sewage water pumps, Elsevier Ltd., WORLD PUMPS, July 2009, DOI: 10.1016/S0262-1762(09)70245-7.
Feng, J.; Benra F.-K.; Dohmen, H. J.: Comparison of Periodic Flow Fields in a Radial Pump among CFD, PIV and LDV
International Journal of Rotating Machinery 2009, DOI: 10.1155/2009/410838.
Feng, J.; Benra, F.-K.; Dohmen, H. J.: Investigations on Turbulence and Blade Orientation Effects in a Radial Diffuser Pump by Laser Doppler Velocimetry, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 2009, 223(8), DOI: 10.1243/09576509JPE694.
Feng, J..; Benra, F.-K.; Dohmen, H. J.: Unsteady Flow Visualization at Part-Load Conditions of a Radial Diffuser Pump by PIV and CFD, Journal of Visualization 2009, 12 (1), 65-72. DOI: 10.1007/BF03181944.
Benra, F.-K.; Feng, J.; Dohmen, H. J.: Quantitativer Vergleich von gemessenen Strömungsgeschwindigkeiten einer radialen Kreiselpumpe mit Ergebnissen numerischer Simulationen, 17. Fachtagung “Lasermethoden in der Strömungsmesstechnik”, September 2009, Erlangen.
Benra, F.-K.; Dohmen, H. J.: Application of Simulation Methods Considering the Interaction between Fluid and Structure
Proceedings of the 7th IASME/WSEAS Int. Conf. on FLUID MECHANICS (FMA'09), Moscow, Russia, 2009.
Wan, B.; Benra, F.-K.; Sohrab,S. H.: A Comparative Numerical Study of the Modified versus the Navier-Stokes Equations of Motion, Proceedings of the 7th IASME/WSEAS Int. Conf. on FLUID MECHANICS (FMA'09), Moscow, Russia, 2009.
F.-K. Benra: Verstopfungsfreie Kreiselpumpen für eine zuverlässige Abwasserförderung, Ingenieurspiegel 2009, (3), 24-25.
Pérez Flores, P.; Kosyna, G.; Benra, F.-K.; Dohmen, H. J.; Gandhi, B. K.; Kumar, M.: Improvement Of Axial-Flow Pump Part Load Behaviour – An Experimental And Numerical Study, Conference on Modelling Fluid Flow (CMFF’09), the 14th International Conference on Fluid Flow Technologies, Budapest, Hungary, 2009.
Feng, J.; Benra, F.-K.; Dohmen, H. J.: Time-Resolved Particle Image Velocimetry (PIV) Measurements In A Radial Diffuser Pump, Proceedings of FEDSM2009, ASME Fluids Engineering Conference, FEDSM2009-78297, Vail, Colorado, USA, 2009, DOI: 10.1115/FEDSM2009-78297.
Will, B.-C.; Benra, F.-K.: Effects and Calculation Of Fluid Flow In Rotor-Stator Cavities, Proceedings of FEDSM2009, ASME Fluids Engineering Conference, FEDSM2009-78503, Vail, Colorado, USA, 2009.
Feng, J.; Benra, F.-K.; Dohmen, H. J.: The Use Of Real Gas Properties For Design And Flow Field Simulations Of A Small Centripetal Steam Turbine, Proceedings of FEDSM2009, ASME Fluids Engineering Conference, FEDSM2009-78330, Vail, Colorado, USA, 2009, DOI: 10.1115/FEDSM2009-78330.
Rabs, M.; Benra,F.-K.; Dohmen, H. J.; Schneider, O.: Investigation Of Flow Instabilities Near The Rim Cavity Of A 1.5 Stage Gas Turbine, Proceedings of ASME Turbo Expo 2009: Power for Land, Sea and Air, GT2009-59965, 2009, Orlando, Florida, USA, 2009, DOI: 10.1115/GT2009-59965.
Petry, N.; Benra, F.-K.; König, S.; Woiczinski, Ch.: Interaction Between Aerodynamic Phenomena And Impeller Structure Of High Pressure Radial Compressors, Proceedings of the 8th European Conference on Turbomachinery, Graz, Austria, 2009.
Feng, J.; Benra, F.-K.; Dohmen, H. J.: Experimental Evaluation Of The Time-Variant Flow Field In A Radial Diffuser Pump By Laser Doppler Velocimetry, Proceedings of the 8th European Conference on Turbomachinery, Graz, Austria, 2009.
2008
Feng, J.; Benra, F-K.; Dohmen, H. J.: Analysis of Unsteady Flow in a Radial Diffuser Pump. The 4th International Symposium on Fluid Machinery and Fluid Engineering, NO. 4ISFMFE-Ab08, November 2008, Beijing, China.
Hirschberger, M.; Kuhlmann, J.; Benra, F.-K.: Computer based development of sewage water pumps for extreme operating conditions and high power consumption. VDMA International Rotating Equipment Conference 2008, Düsseldorf, Germany.
Benra, F.-K.; Dohmen, H. J.: Part Load Characteristic Investigation of a Highly Loaded Axial Flow Pump with Casing Treatment Comparison of Experimental and Numerical Results. IAHR, 24th Symposium on Hydraulic Machinery and Systems, 2008, Foz do Iguasso, Brasil.
Feng, J.; Benra, F-K.; Dohmen, H. J. : Measurement of Periodic Flow Field in a Radial Diffuser Pump by PIV and LDV Methods. IAHR, 24th Symposium on Hydraulic Machinery and Systems, 2008, Foz do Iguasso, Brasil.
Zwingenberg, M.; Benra, F.-K.; Werner, K.: Thermodynamische Diagnose von Gasturbinen: Theorie und Praxis
8. Tagung Technische Diagnostik, Tagungsband Selbstverlag An-Institut Fluid- und Pumpentechnik Merseburg, ISBN: 978-3-9811266-1-4, Merseburg, Oktober 2008.
Benra, F.-K.; Feng, J.; Dohmen, H. J.: Messung der periodisch-instationären Strömung im Laufrad und im beschaufelten Diffusor einer radialen Kreiselpumpe kleiner spezifischer Drehzahl mit LDV. 16. Fachtagung “Lasermethoden in der Strömungsmesstechnik”, September 2008, Karlsruhe.
Will, B.-Ch.; Benra, F.-K.: The Rise of Complexity in Describing Fluid Flow in Rotating Cavities. Proceedings of FEDSM2008, ASME Fluids Engineering Conference, 2008, FEDSM2008-55341, Jacksonville, Florida USA. DOI: 10.1115/FEDSM2008-55341.
Benra F.-K.; Dohmen H. J.: Unsteady Three-Dimensional Flow Phenomena In An Axial Flow Pump At Different Operating Points. Proceedings of FEDSM2008, ASME Fluids Engineering Conference, 2008, FEDSM2008-55344, Jacksonville, Florida USA. DOI: 10.1115/FEDSM2008-55344.
Benra F.-K.; Dohmen H. J.: Numerical and Experimental Investigation of the Flow in a Centrifugal Pump Stage. Proceedings of the 5th WSEAS Int. Conf. on FLUID MECHANICS (FLUIDS'08), Acapulco, Mexico, January 2008.
Benra, F.-K.; Dohmen, H. J.: Investigation on the Time-Variant Flow in a Single-Blade Centrifugal Pump. Proceedings of the 5th WSEAS Int. Conf. on FLUID MECHANICS (FLUIDS'08), Acapulco, Mexico, January 2008.
Benra, F.-K.; Dohmen, H. J., Schneider, O.: Application of an Enhanced 1D Network Model to Calculate the Flow Properties of a Pre-Swirl Secondary Air System. Proceedings of GT2008, ASME Turbo Expo 2008: Power for Land, Sea and Air, GT2008-50442, Berlin, Germany. DOI: 10.1115/GT2008-50442.
Zwingenberg, M; Benra, F.-K.; Werner, K.: Improvement of Performance Prediction by Automated Assimilation of Gas Turbine Component Maps. Proceedings of GT2008, ASME Turbo Expo 2008: Power for Land, Sea and Air, GT2008-51068, Berlin, Germany. DOI: 10.1115/GT2008-51068.
Benra, F.-K.; Feng, J.; Dohmen, H. J.: PIV Measurements Of Unsteady Flow In A Diffuser Pump At Different Flow Rates
The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, ISROMAC12-2008-20024, Hawaii, February 17-22, 2008.
2007
Feng, J.; Benra, F.-K. ; Dohmen, H. J.: Qualitative Comparison of Unsteady Flow between Numerical and Experimental Results in a Radial Diffuser Pump, The Visualization Society of Japan, Journal of Visualization, Vol. 10, No. 4 (2007) pp. 349-357, DOI: 10.1007/BF03181893.
Benra, F.-K.; Feng, J.; Dohmen, H. J.: Untersuchung des periodisch-instationären Geschwindigkeitsfeldes im Laufrad und im beschaufelten Diffusor einer radialen Kreiselpumpenstufe kleiner spezifischer Drehzahl, 15. GALA Fachtagung “Lasermethoden in der Strömungsmesstechnik”, 4.–6. September 2007, Rostock.
Benra, F.-K.: Application of Fluid/Structure Interaction Methods to Determine the Impeller Orbit Curves of a Centrifugal Pump, Proceedings of the 5th IASME / WSEAS International Conference on FLUID MECHANICS and AERODYNAMICS, FMA'07, Paper 565-199, August 2007, Vouliagmeni, Greece.
Benra F.-K.; Dohmen H. J.: Comparison of pump impeller orbit curves obtained by measurement and FSI simulation. Proceedings of 2007 ASME Pressure Vessels and Piping Division Conference, PVP2007-26149, July 22-26, 2007, San Antonio, Texas, DOI: 10.1115/PVP2007-26149.
Benra F.-K.; Dohmen H. J.: Numerical and Experimental Evaluation of the Time-Variant Flow Field in a Single-Blade Centrifugal Pump, Proceedings of HEFAT2007, 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 1–4 July 2007, Sun City, South Africa.
Benra, F.-K.; Feng, J.; Dohmen, H. J.; Feng, J.: Measurement of the Periodic Flow Field in a Radial Diffuser Pump by the PIV Method, Proceedings of 5th Joint ASME/JSME Fluids Engineering Conference, FEDSM2007-37400, July 30-August 2, 2007 San Diego, California, USA.
Benra, F.-K.; Dohmen, H. J.; Schmidt, M.: Flow Phenomena in a Highly-Loaded Single-Stage Axial Flow Pump – Comparison of Experimental and Numerical Results, Proceedings of 5th Joint ASME/JSME Fluids Engineering Conference, FEDSM2007-37552, July 30-August 2, 2007 San Diego, California, USA, DOI: 10.1115/FEDSM2007-37552.
Benra, F.-K.; Dohmen, H. J.; Jarzombek, K.: Saubere Kühlluft für heiße Turbinen : Partikelabscheidung im Kühlluftsystem von Gasturbinen, Essener Unikate, DOI: 10.17185/duepublico/73782.
Feng,J; Benra, F.-K.; Dohmen, H. J.: Numerical Investigation on Pressure Fluctuations for Different Configurations of Vaned. Diffuser Pumps, International Journal of Rotating Machinery, Vol. 2007, Article ID 34752, 10 pages, 2007, DOI 10.1155/2007/34752.
Benra, F.-K.; Dohmen, H. J.; Jarzombek, K.; Schneider, O.: CFD analysis of flow in a high-radius pre-swirl system. Proceedings of GT2007, ASME Turbo Expo 2007: Power for Land, Sea and Air, May 14-17, 2007, Montreal, Canada, GT2007-27404, DOI: 10.1115/GT2007-27404.
Benra, F.-K.; Feng, J.; Dohmen, H. J.: Numerical Investigation on Impeller-Diffuser Interactions in a Radial Pump, Proceedings of the 7th European Conference on Turbomachinery 2007, Athens, Greece, March 2007, pp. 773-782.
Benra, F.-K.; Dohmen, H. J.: Vergleich von berechneten und gemessenen Strömungsgeschwindigkeiten in einer Kreiselpumpe mit Einschaufelrad, Zeitschrift Δp, Ausgabe I, Februar/März 2007.
Weltersbach, D.; Brillert, D.; Cichon, C.: Investigation of a Pre-Swirl Cooling Air Flow System with Data Acquisition in the Absolute and Relative Frame of Reference, 5th International Conference on Fluid Mechanics and Aerodynamics 2007, WSEAS 2017/p>.
Brillert D.; Lingner, U.; Maghon, H.: Ten Years od Operating Experience with SGT5-4000F, Market-Driven Evolution of Gas Turbines and Plants, Power-GEN Asia 2007, Bangkok, Thailand, Proceedings of 6. International Conference on Fluid Power Transmission and Control, Hangzhou, China, April 2005.
Feng,J; Benra, F.-K.; Dohmen, H. J.: A Study on Impeller-Diffuser Interactions in a Radial Pump, Proceedings of the 7th European Conference on Turbomachinery 2007, Athen, Greece.
2006
Benra, F.-K.; Dohmen, H. J.; Sommer, M.: Flow Field Visualization of a Single-Blade Centrifugal Pump using PIV-Method - Comparison to Numerical Results. Journal of Visualization, Vol. 9, No. 4 (2006), 358. DOI: 10.1007/BF03181771.
Benra, F.-K.; Savilius, N.: Experimental Determination of the Hydrodynamic Imbalance of a Single-Blade Centrifugal Pump. WSEAS, Transactions on Fluid Mechanics, Issue 6, Volume 1, June 2006, ISBN 1790-5087, pp. 707 - 713.
Benra, F.-K.; Feng, J.; Dohmen, H. J.: Numerical Investigation of Radial Gap Influence on Diffuser Induced Impeller Flow. WSEAS, Transactions on Fluid Mechanics, Issue 5, Volume 1, May 2006, ISBN 1790-5087, pp. 472 - 47.
Benra, F.-K.: Reliable Transport of Sewage Water with Centrifugal Pumps – All Technical Problems Solved? Proceedings of the 3rd Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, Published by World Scientific Publishing Co. Pte. Ltd., Singapore, 2006. DOI:10.1142/9789812771285_0035.
Benra, F.-K.; Dohmen, H. J.: Einsatz von Fluid-Struktur-Interaktionsmethoden zur Berechnung der Orbitkurven von Pumpenrotoren. 7. Tagung Technische Diagnostik, Tagungsband Selbstverlag An-Institut Fluid- und Pumpentechnik Merseburg, ISBN: 3-9807981-9-4, Merseburg, Oktober 2006.
Benra, F.-K.; Dohmen, H. J.: Quantitativer Vergleich von numerisch und experimentell ermittelten Strömungsfeldern in einer Einschaufelradpumpe. GALA, 14. Fachtagung "Lasermethoden in der Strömungsmesstechnik", Braunschweig, 5.-7. September 2006.
Benra, F.-K.; Feng, J.; Dohmen, H. J.: Numerical Study on Impeller-Diffuser Interactions with Radial Gap Variation Pump. Proceedings of the 4th WSEAS International Conference on FLUID MECHANICS and AERODYNAMICS, Elounda, Agios Nicolaos, Crete Island, Greece, August 2006.
Benra, F.-K.; Savilius, N.: Experimental Investigation of Transient Hydrodynamic Forces of a Single-Blade Centrifugal Pump. Proceedings of the 4th WSEAS International Conference on FLUID MECHANICS and AERODYNAMICS, Elounda, Agios Nicolaos, Crete Island, Greece, August 2006.
Benra, F.-K.; Zwingenberg, M.: Measurement of the Periodic Unsteady Flow in a Single-Blade Centrifugal Pump by PIV-Method. Proceedings of the 4th WSEAS International Conference on FLUID MECHANICS and AERODYNAMICS, Elounda, Agios Nicolaos, Crete Island, Greece, August 2006.
Benra, F.-K.; Sohrab, S. H.: Modified Theory of Laminar Flow Around Rigid and Liquid Cylinders. Proceedings of the 4th WSEAS International Conference on FLUID MECHANICS and AERODYNAMICS, Elounda, Agios Nicolaos, Crete Island, Greece, August 2006.
Benra, F.-K.: Practical Application of Basic Fluid Mechanic Relations to Estimate the Impact of Surface Roughness Due to Milling on the Aerodynamics of Shrouded Centrifugal Compressor Impellers. WSEAS Transactions on Fluid Mechanics, Issue 1, Volume 1, January 2006, pp. 22-30.
Benra, F.-K.; Feng, J., Dohmen, H. J.: The Influence of Leakage Flow on the Main Flow in a Radial Pump Stage. 23rd IAHR SYMPOSIUM on Hydraulic Machinery and Systems Yokohama, Japan, October 17-21, 2006.
Benra, F.-K.; Dohmen, H. J.; Zwingenberg, M.: Comparison of Experimental and Numerical Obtained Velocity Fields in a Single-Blade Centrifugal Pump. Forum on Fluid Machinery, FEDSM 2006, Miami, Florida, USA, July 2006, DOI: 10.1115/FEDSM2006-98351.
Benra, F.-K.; Dohmen, H. J.; Wan, Bo: Determination of Pump Impeller Deflection; comparison of FSI-Simulations to Measurements. Forum on Fluid Machinery, FEDSM 2006, Miami, Florida, USA, July 2006, DOI: 10.1115/FEDSM2006-98464.
Benra, F.-K.; Feng, J.; Dohmen, H. J.: A New Method to Simulate Rotor-Stator Interaction in a Centrifugal Pump Stage. 8th Biennial ASME Conference Engineering Systems Design and Analysis, ESDA 2006, Torino, Italy, July 2006. DOI: 10.1115/ESDA2006-95249.
Benra, F.-K.: Application of Basic Fluid Mechanic Relations to Estimate the Influence of Surface Roughness on the Aerodynamics of Centrifugal Compressor Impellers. Proceedings of the WSEAS/IASME International Conference on FLUID MECHANICS (FLUIDS '06), Miami, Florida, January 2006.
Jarzombek, K.; Dohmen, H. J.; Benra, F.-K.; Schneider, O.: Flow Analysis In Gas Turbine Pre-Swirl Cooling Air Systems - Variation of Geometric Parameters. Proceedings of ASME/IGTI Turbo Expo 2006, May 2006. DOI: 10.1115/GT2006-90445.
Benra, F.-K.; Klapdor, V.; Schulten, M.: Sensitivity Study on the Impact of Surface Roughness due to Milling on the Efficiency of Shrouded Centrifugal Compressor Impellers. Proceedings of ASME/IGTI Turbo Expo 2006, May 2006. DOI: 10.1115/GT2006-90499 .
Benra, F.-K.; Feng, J.; Dohmen, H. J.: Numerical Study on the Pressure Fluctuations in a Complete Stage of a Centrifugal Pump
ISROMAC, Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, February 2006.
Benra, F.-K.; Dohmen, H. J.; Sommer, M.: Experimental Investigation of Hydrodynamic Forces for Different Configurations of Single-Blade Centrifugal Pumps. ISROMAC, Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, February 2006.
Benra, F.-K.: Numerical and Experimental Investigation on the Flow Induced Oscillations of a Single-Blade Pump Impeller. ASME Journal of Fluids Engineering, July 2006, Vol. 128 pp. 783-793. DOI: 10.1115/1.2201629.
Benra, F.-K.: Practical Application of Basic Fluid Mechanic Relations to Estimate the Impact of Surface Roughness Due to Milling on the Aerodynamics of Shrouded Centrifugal Compressor Impellers, WSEAS, Transactions on Fluid Mechanics 2006, Heft 1.
Benra, F.-K.; Dohmen, H. J.: Einsatz von Fluid-Struktur-Interaktionsmethoden zur Berechnung der Orbitkurven von Pumpenrotoren, 7. Tagung Technische Diagnostik 2006, Merserburg.
Benra, F.-K.; Dohmen, H. J.: Quantitativer Vergleich von numerisch und experimentell ermittelten Strömungsfeldern in einer Einschaufelpumpe,Fachtagung Lasermethoden in der Strömungsmesstechnik 2006, Braunschweig, Physikal.-Techn. Bundesanst, 2006.
2005
Benra, F.-K.: Untersuchung der periodisch instationären Strömung in einer Einschaufelradpumpe. GALA, 13. Fachtagung "Lasermethoden in der Strömungsmesstechnik", Cottbus, 6. - 8. September 2005.
Benra, F.-K.; Dohmen, H. J.; Sommer, M.: Flow Field Visualization of a Single-Blade Centrifugal Pump using PIV-Method - Comparison to Numerical Results. Proceedings of the PSFVIP5, Daydream Island, Australia, September 2005. DOI: 10.1007/BF03181771.
Benra, F.-K.; Dohmen, H. J.: Theoretische und experimentelle Untersuchung des Sekundärluftsystems stationärer Gasturbinen. Tagungsbeitrag zur Siemens-Jahrestagung, Universität Duisburg-Essen, Duisburg, Juni 2005.
Benra, F.-K.; Dohmen, H. J.; Jarzombek, K.; Schneider, O.: Investigations of Dust Separation in a Gasturbine Pre-Swirl Cooling Air System Using New, Enhanced Simulation Methods. Proceedings of ASME Fluids Engineering Summer Conference, FEDSM2005-77212, June 19-23, 2005, Houston, Texas, USA. DOI: 10.1115/FEDSM2005-77212.
Benra, F.-K.; Dohmen, H. J.: Numerical Investigation of the Transient Flow in a Centrifugal Pump Stage. Proceedings of ASME Fluids Engineering Summer Conference, FEDSM2005-77419, June 19-23, 2005, Houston, Texas, USA. DOI: 10.1115/FEDSM2005-77419.
Benra, F.-K.; Dohmen, H. J.; Sommer, M.: Periodically Unsteady Flow in a Single-Blade Centrifugal Pump - Numerical and Experimental Results. Proceedings of ASME Fluids Engineering Summer Conference, FEDSM2005-77219, June 19-23, 2005, Houston, Texas, USA. DOI: 10.1115/FEDSM2005-77219.
Benra, F.-K.: Transport of Sewage Water with Centrifugal Pumps - Technical Problems and Paths to Their Solution. Proceedings of Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems, Dubrovnik, Croatia, 5.-10. June 2005.
Benra, F.-K.; Sommer, M.: Comparison of Calculated and Measured Hydrodynamic Forces of a Centrifugal Sewage Water Pump. Proceedings of 1st International Conference on Experiments / Process / System Modeling / Simulation / Optimization, Athens, Greece, 6-9 July 2005.
Benra, F.-K.; Dohmen, H. J.; Jarzombek, K.; Schneider, O.: A Contribution to the Abrasive Effect of Particles in a Gas Turbine Pre-Swirl Cooling Air System. Proceedings of ASME/IGTI Turbo Expo 2005, Paper GT2005-68188, Reno, Tahoo, Nevada, June 2005. DOI: 10.1115/GT2005-68188.
Benra, F.-K.; Dohmen, H. J.; Feng, J.: Numerical and Experimental Investigation of Cavitation Flow in a Centrifugal Pump.
Proceedings of 5th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi’an, China, July 2005.
Benra, F.-K.; Feng, J.: Numerical Simulation and Experiments on the Flow in a Multistage Centrifugal Pump, Proceedings of 6. International Conference on Fluid Power Transmission and Control, Hangzhou, China, April 2005.
Schneider, O: Untersuchung zum Abscheideverhalten von Partikeln in einem Vordrall-Kühlluftsystem für Gasturbinen
Dissertation, Universität Duisburg-Essen, 2005.
Benim, A.C; Cagan, M.; Bonhoff, B.; Brillert D.:
Simulation of Flow in Pre-Swirl Systems with Emphasis on Rotor-Stator Treatment, 3rd M.I.T Conference on Computational Fluid and Solid Mechanics 2005,Massachusetts Institue of Technology, Boston USA 2005.
Benim, A.C; Cagan, M.; Bonhoff, B.; Bricaud,C; Brillert D.: Computational Analysis of Flow and Heat Transfer in a Direct-Transfer Pre-swirl System, 6th European Conference of Turbomachinery- Fluid Dynamics and Thermodynamics, 2005, Lille, France.
Benim, A.C; Cagan, M.; Bonhoff, B.; Brillert D.: Simulation of Flow in Pre-Swirl Systems with Emphasis on Rotor-Stator Interface. 3rd WSESAS/IASME International conferences on Fluid Mechanics ans Aerodynamics,Corfu Island, WSEAS/IASME international conferences, Greece 2005.
2004
F.-K. Benra, H. J. Dohmen, O. Schneider: Grundlagenuntersuchungen an rotierenden Ringräumen zur Optimierung des Sekundärluftsystems moderner Gasturbinen. VDI-Energietechnik, Fachtagung: Stationäre Gasturbinen, 23. – 24. November 2004, Leverkusen.
F.-K. Benra, H. J. Dohmen, M. Sommer: Numerische Simulation der zeitabhängigen, räumlichen Strömung in einer Kreiselpumpe mit Einschaufelrad. Δp – Das Pumpenmagazin, Ausgabe 2, Mai 2004, S. 44 – 47.
F.-K. Benra, H. J. Dohmen, O. Nowack: PIV- und LDV-Messungen im beschaufelten Diffusor einer radialen Kreiselpumpe.
GALA-Fachtagung “Lasermethoden in der Strömungsmesstechnik”, 7. – 9. September 2004, Universität Karlsruhe.
F.-K. Benra, H. J. Dohmen: Messung der strömungsinduzierten Auslenkungen des Rotors einer radialen Abwasserpumpe. 6. Tagung Technische Diagnostik, An-Institut Fluid- und Pumpentechnik Merseburg, Merseburg, 21.–22. Oktober 2004.
F.-K. Benra, H. J. Dohmen: Flow Induced Rotor Oscillations of a Centrifugal Sewage Water Pump. ISMA2004, Conference on Noise and Vibration Engineering, 2004 September 20–22, Leuven, Belgium.
F.-K. Benra, H. J. Dohmen: Theoretical and Experimental Investigation on the Flow induced Vibrations of a Centrifugal Pump
IPC 2004, International Pipeline Conference, Calgary, Alberta, Canada, October 4 - 8, 2004, IPC04-0348. DOI: 10.1115/IPC2004-0348.
F.-K. Benra, H. J. Dohmen, O. Schneider: Experimental Investigation of Flow Induced Rotor Oscillations in a Centrifugal Sewage Water Pump. 2004 ASME HEAT Transfer/Fluids Engineering Summer Conference, Charlotte, North Carolina, USA, July 11 – 15, 2004, HT_FED2004-56066. DOI: 10.1115/HT-FED2004-56066.
F.-K. Benra, H. J. Dohmen, M. Kloda: Optimization of a Small 2-Stage Centrifugal Blower by CFD Methods. 2004 ASME Heat Transfer/Fluids Engineering Summer Conference, Charlotte, North Carolina, USA, July 11-15, 2004, HT_FED2004-56098. DOI: 10.1115/HT-FED2004-56098.
F.-K. Benra, H. J. Dohmen, M. Kloda: Theoretical and Experimental Investigation of the Flow Field in a 2-Stage Centrifugal Blower. 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 21 – 24 June 2004, Cape Town, South Africa, Paper number: BF2.
F.-K. Benra, H. J. Dohmen, M. Sommer: Flow Induced Vibrations of a Single-Blade Centrifugal Pump. 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 21 – 24 June 2004, Cape Town, South Africa, Paper number: BF1.
F.-K. Benra, M. Sommer, M. Müller, A. Töws: Investigation of the Three-Dimensional Time Accurate Flow in a Single-Blade Sewage Water Pump. 4th South African Conference on Applied Mechanics, 18–21 January 2004, Johannesburg, South Africa, Paper number: 61.
F.-K. Benra, H. J. Dohmen, O. Schneider: Measurement of Flow Induced Rotor Oscillations in a Single-Blade Centrifugal Pump. 2004 ASME Pressure Vessels and Piping Conference, July 25 – 29, 2004, San Diego, California, USA. DOI: 10.1115/PVP2004-2868.
O. Schneider, H. J. Dohmen, F.-K. Benra, D. Brillert: Dust Separation in a Gas Turbine Pre-Swirl Cooling Air System, A Parameter Variation. ASME TURBO EXPO 2004, 14-17 June, 2004, Vienna, Austria, GT2004-53048. DOI: 10.1115/GT2004-53048.
O. Schneider, H. J. Dohmen, F.-K. Benra, D. Brillert: Analysis of Dust Separation Inside a Pre-Swirl Cooling Air System. 10th International Symposium on Transport, Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, March 07-11, 2004, ISROMAC10-2004-029.
F.-K. Benra, H. J. Dohmen, O. Schneider: Comparison of Calculated and Measured Flow induced Oscillations of Centrifugal Pump Rotors. 10th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, March 07-11, 2004, ISROMAC10-2004-017.
2003
F.-K. Benra, H. J. Dohmen, O. Schneider: Calculation of Hydrodynamic Forces and Flow Induced Vibrations of Centrifugal Sewage Water Pumps. 4th ASME / JSME Joint Fluids Engineering Conference, Honolulu, Hawaii, USA, July 6 – 11, 2003, FEDSM2003-4510, DOI: 10.1115/FEDSM2003-45102.
D. Brillert, F.–K. Benra, H. J. Dohmen, O. Schneider: Investigation of Internal Cooling Air Flow of Gas Turbines with Attention to Heat Transfer. 4th ASME/JSME Joint Fluids Engineering Conference, Honolulu, Hawaii, USA, July 6 – 11, 2003, FEDSM2003-45106, DOI: 10.1115/FEDSM2003-45106.
O. Schneider, H. J. Dohmen, F.-K. Benra, D. Brillert: Experimental and Numerical Analysis of the Flow Structure and Dust Separation Inside a Pre-Swirl Cooling Air System. 4th ASME/JSME Joint Fluids Engineering Conference, Honolulu, Hawaii, USA, July 6-11, 2003, FEDSM2003-45096, DOI: 10.1115/FEDSM2003-45096.
D. Brillert, A.V. Mirzamoghadam, H. J. Dohmen, F.-K. Benra, O. Schneider: Application of Conjugate CFD to the Internal Cooling Air Flow System of Gas Turbines. ASME Turbo Expo 2003, June 16-19, 2003, Atlanta, Georgia, USA, GT2003-38471, DOI: 10.1115/GT2003-38471.
O. Schneider, H. J. Dohmen, F.-K. Benra, D. Brillert: Investigations of Dust Separation in the Internal Cooling Air System of Gas Turbines: ASME TURBO EXPO 2003, 16-19 June, 2003, Atlanta, Georgia USA, GT2003-38293, DOI: 10.1115/GT2003-38293.
F.-K. Benra, H. J. Dohmen, O. Schneider: Calculation of Flow Induced Vibration Amplitudes of Radial Sewage Water Pumps.
Proceedings of the 7th International Symposium on Emerging Technologies for Fluids, Structures and Fluid-Structure Interactions, ASME Pressure Vessels and Piping Conference, PVP-Vol. 460, Paper PVP2003-1947, Cleveland, USA, July 2003, pp. 45 - 53, DOI: 10.1115/PVP2003-1947.
F.-K. Benra, H. J. Dohmen, O. Schneider: Investigation on the Unsteady Flow in Radial Sewage Water Pumps to Determine the Hydrodynamic Forces. Conference Proceedings of the 5th European Conference on Turbomachinery, 17th – 22nd March 2003, Praha, Czech Republic.
F.-K. Benra, H. J. Dohmen, O. Schneider: Unsteady Flow in Single-Blade Sewage Water Pumps. 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 23 – 26 June 2003, Victoria Falls, Zambia, Paper number: BF1.
F.-K. Benra, P. Köhler, G. Witt.: Virtuelle Produktentwicklung am Beispiel eines Pumpenlaufrades. Zeitschrift Chemie Ingenieur Technik, Volume 75, Issue 1 - 2, 2003. DOI: 10.1002/cite.200390010.
2002
F.-K. Benra, D. Brillert, H. J. Dohmen, O. Schneider: Grundlagenuntersuchungen an rotierenden Ringräumen zur Optimierung des Sekundärluftsystems moderner Gasturbinen. VDI-Bericht Nr.: 1721, Gasturbinen in Praxis und Entwicklung, Leverkusen, November 2002, S. 85–94.
F.-K. Benra, H. J. Dohmen, O. Schneider: Berechnung der Schwingungsamplituden von Abwasserpumpen. 5. Tagung Technische Diagnostik, Merseburg, Oktober 2002.
F.-K. Benra, H. J. Dohmen, O. Schneider, M. Sommer: Strömungsgeschwindigkeitsmessung mit der Particle-Image-Velocimetry in einer Kreiselpumpenrückführstufe. Fachtagung Lasermethoden in der Strömungsmesstechnik, Rostock, September 2002, S. 44.1–44.6.
O. Schneider, H. J. Dohmen, F.-K. Benra, M. Schneider: Messung von Strömungsgeschwindigkeiten mit der Particle-Image-Velocimetry in einem Gasturbinenrotor. Fachtagung Lasermethoden in der Strömungsmesstechnik, Rostock, September 2002, S. 29.1 – 29.6.
F.-K. Benra, H. J. Dohmen: Strömungsinduzierte Schwingungen von Abwasserpumpen. VDI-Bericht Nr.: 1682, Fluid-Struktur-Wechselwirkung, Wiesloch, Juni 2002, S. 263–284.
O. Schneider, H. J. Dohmen, A. W. Reichert: Experimental Analysis of Dust Separation in the Internal Cooling Air System of Gas Turbines. ASME Turbo Expo 2002, GT-2002-30240. DOI: https://doi.org/10.1115/GT2002-30240.
2001
F.-K. Benra: Das Pumpenlaufrad aus dem Computer. Process, Magazin für Chemie und Pharmatechnik, Nr. 11, S. 42-45, 2001.
F.-K. Benra: Einfache Gleitringdichtungen für gefährliche Medien?
UMWELT, VDI-Verlag, S. 42-44, 6/2001.
F.-K. Benra: Economic Development of Efficient Centrifugal Pump Impellers by Numerical Methods. World Pumps, The International Journal of Pump Users, Elsevier Advanced Technologiy, Nr. 416, p.48-53, May 2001. DOI: 10.1016/S0262-1762(01)80206-6.
F.-K. Benra, P. Köhler, G. Witt: CAx-Prozesskette für Pumpenlaufräder. VDI-Bericht Nr. 1614, Effiziente 3D-Produktmodellierung – Fortschritte und Fallstricke, 2001, S. 313–334.
F.-K. Benra, M. Müller: Untersuchung zur schwingungsoptimierten Gestaltung von Abwasserpumpen. VDI-Berichte 1606, Schwingungen in Maschinen und Anlagen, S. 59-79, 2001.
D. Brillert: Strömungsberechnung im Kühl- und Sperrluftsystem von Gasturbinen zur Optimierung des Sekundärluftsystems.
Dissertation, Gerhard-Mercator-Universität Duisburg, 2001.
D. Brillert, A.W. Reichert, H. Simon: The Flow Structure in Rotating Hollow Shafts with Radial Inflow and Axial Throughflow.
ASME Turbo Expo 2001 - Land, Sea & Air, June 4-7th, 2001, New Orleans, Louisiana, USA. DOI: 10.1115/2001-GT-0203.
2000
F.-K. Benra: Leckraten versagender Gleitringdichungen. Tagung Technische Diagnostik 2000, Merseburg, An-Institut Fluid- und Pumpentechnik, 26.-27.10.2000.
L.J. Lenke, H. Simon: Aerodynamic Analysis of Return Channels of Multi-Stage Centrifugal Compressors. ASME Paper, International Mechanical Engineering Congress & Exposition of ASME, 5.-11. November 2000, Orlando, Florida, USA
D. Brillert, D. Lieser, A.W. Reichert, H. Simon: Total Pressure Losses in Rotor Systems with Radial Inflow. ASME Paper Nr. 2000-GT-283, München, 8.-11. Mai 2000. DOI: 10.1115/2000-GT-0283.
D. Brillert, A.W. Reichert, H. Simon: Flow Losses in Rotating Passages in Secondary Air Systems of Gas Turbines. ISROMAC-8, 2000, Honolulu, Hawai, USA.
1999
F.-K. Benra: Schwingungsprobleme bei Abwasserpumpen. UMWELT, VDI-Verlag, Nr.10, S. 6-9, 1999.
F.-K. Benra: Trockenlaufschäden und die Folgen. Δp, Das Moderne Pumpenmagazin, Ingenieur-Verlag, Nr. 2, April 1999, S.46-49.
L.J. Lenke: Numerische Simulation der turbulenten Strömung in Rückführkanälen mehrstufiger Radialverdichter. Dissertation, Gerhard-Mercator-Universität Duisburg, 1999.
C. Roehl, H. Simon: Numerical Simulation of Compressible Flows with Adaptive Unstructured Grids. FEDSM99-7260, 3rd ASME/JSME Joint Fluids Engineering Conference, San Francisco, California, USA, July 18-23, 1999.
C. Roehl, H. Simon: Adaptive Unstructured Grids for Simulating Transsonic Flows in Turbomachinery. ASME Paper 99-GT-213, Indianapolis 1999.
D. Brillert, A.W. Reichert, H. Simon: Calculation of Flow Losses in Rotating Passages of Gas Turbine Cooling Systems. ASME Paper 99-GT-251, 1999.
L.J. Lenke, H. Simon: Numerical Investigations on the Optimum Design of Return Channels of Multi-Stage Centrifugal Compressors. ASME Paper 99-GT-103, 1999. DOI: 10.1115/99-GT-103.
1998
Ch. Röhl: Adaptive unstrukturierte Netze numerischer Simulation von Strömungsvorgängen in Turbomaschinen. Dissertation, Gerhard-Mercator-Universität - GH Duisburg, 1998,
L.J. Lenke, H. Simon: Numerische Strömungsuntersuchungen in Rückführkanälen mehrstufiger Radialverdichter
VDI Berichte Nr. 1425, 1998.
J.-S. Cheong: Implizite Verfahren zur Untersuchung instationärer Strömungsvorgänge durch Wechselwirkung in axialen Turbomaschinen. Dissertation, Gerhard-Mercator-Universität - Gesamthochschule Duisburg, 1998.
L.J. Lenke, H. Simon: Numerical Simulation of the Flow within return Passages of Centrifugal Compressors. ERCOFTAC Seminar and Workshop on Turbomachinery Flow Prediction VI, 5th-8th January 1998, Aussois, France.
D. Brillert, A.W. Reichert, H. Simon: Cooling Air Flow in a Multi Disc Industrial Gas Turbine Rotor. ASME Paper 98-GT-136. DOI: 10.1115/98-GT-136.
L.J. Lenke, H. Simon: Numerical Simulation of the Flow through the Return Channel of Multi-Stage Centrifugal Compressors. ASME Paper 98-GT-255, 1998. DOI: 10.1115/98-GT-255.
1997
J.-S. Cheong, H. Simon: A Numerical Investigation of Unsteady Flow Through an Axial Compressor Stator. Beijing, 1997.
J.-S. Cheong, H. J. Dohmen, H. Simon: Multigrid Method for Unsteady Viscous Flows. ASME Paper, FEDSM 97-3500, Vancouver 1997.
A.W. Reichert, D. Brillert, H. Simon: Loss Prediction for Rotating Passages in Secondary Air Systems. ASME Paper 97-GT-215, 1997. DOI: 10.1115/97-GT-215.
L.J. Lenke, H. Simon: An Improved Algebraic Reynolds Stress Model for Predicting Separated Flows. Beijing, Proceedings of the 7th International Symposium on Computational Fluid Dynamics, 15.-19. September 1997.
L.J. Lenke, H. Simon: Viscous Flow Field Computations for a Transonic Axial-Flow Compressor Blade using Different Turbulence Models. ASME Paper 97-GT-207, 1997. DOI: 10.1115/97-GT-207.
V. Amedick, H. Simon: Numerical Simulation of the Flow through the Rotor of a Radial Inflow Turbine. ASME Paper 97-GT-90, 1997. DOI: 10.1115/97-GT-090.
F.-K. Benra: Energetische Optimierung von Kreiselpumpen für den Abwassertransport. Forum für Umweltforschung, Heft 1, Gerhard-Mercator-Universität Duisburg, 1997.
1996
F.-K. Benra: Vorhersage des Schwingungsverhaltens von Abwasserpumpen. VDI-Schwingungstagung, VDI-Bericht 1285, S. 311-325, 1996.
F.-K. Benra: Neue Entwicklungen bei Abwasserpumpen. UMWELT, VDI-Verlag, Nr. 10, S. 10-13, 1996.
F.-K. Benra: Über das Schwingungsverhalten radialer Kreiselpumpen für Abwasser. Beitrag B6-2, Karlsruher Pumpentagung, September 1996.
F.-K. Benra: Pumpen in der Abwasserwirtschaft. UMWELT, VDI-Verlag, Nr. 5, S. 12-19, 1996.
J.-S. Cheong, H. J. Dohmen, H. Simon: A comparison of different solution Procedures for compressible viscous flows
Finite Volumes for Complex Applications, Hermes, 1996, ISBN 2-86601-556-8.
V. Amedick, H. Simon: Numerical Simulation of the Three Dimensional Turbulent Flow in a Turbine Rotor with Conical Walls
6th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-6), Rotating Machinery 1996, Vol. II, Honolulu, Hawaii, USA, 1996.
C. Röhl, H. Simon: Flow Simulations in Aerodynamically highly loades Turbomachines using Unstructured Adaptive Grids. Notes on Numerical Fluid Mechanics, Vol. 52, pp. 446-460, 1996.
1995
C. Röhl, H. Simon: Simulations of Transonic Flows in Turbomachines Using a Novel Adaptation Method with Unstructured Grids. 6th International Symposium on Computational Fluid Dynamics (6 ISCFD), Lake Tahoe, Nevada, USA, 1995.
L. Lenke, H. Simon: Viscous-Flow Field Calculations for Turbine Cascades using different Turbulence Models. 9th International Conference on Numerical Methods in Laminar and Turbulent Flow, Atlanta, USA 1995.
L. Lenke, A.W. Reichert, H. Simon: Comparison of viscous flow field calculations applicable to turbomachinery design with experimental measurements. 7th International Conference on Computational Methods and Experimental Measurements, CMEM 95-16-18 Mai 1995, Capri, Italien.
L. Lenke, A.W. Reichert, H. Simon: Viscous Flow Field Calculations for the VKI-1 Turbine Cascade using different Turbulence Models. ASME-Gas Turbine and Aeroengine Congress, Houston, Texas (1995), Paper-No. 95-GT-91. DOI: 10.1115/95-GT-091.
A.W. Reichert, H. Simon: Design and Flow Field Calculations for Transonic and Supersonic Radial Inflow Turbine Guide Vanes. ASME-Gas Turbine and Aeroengine Congress, Houston, Texas 1995, Paper-No. 95-GT-97. DOI: 10.1115/1.2840999.
1994
A.W. Reichert: Strömungssimulationen zur optimalen Gestaltung von Turbomaschinenkomponenten. Dissertation, Gerhard-Mercator-Universität - GH Duisburg, 1994, Deutsche Hochschulschriften 1047, Verlag, Hänsel-Hohenhausen, Engelsbach, ISBN 3-8267-1047-9.
A.W. Reichert, H. Simon: Numerical Investigations to the Optimum Design of Radial Inflow Turbine Guide Vanes. ASME-Gas Turbine and Aeroengine Congress den Haag, 1994, Paper-No. 94-GT-61. DOI: 10.1115/94-GT-061.
A.W. Reichert, H. Simon: Beitrag zur Optimierung hochbelasteter Zentripetalturbinen. VDI-GET Fachtagung "Thermische Strömungsmaschinen", Aachen 1994 VDI Berichte 1109, 1994, pp. 191-208.
1993
K. J. Bauermeister, H. J. Dohmen, H. Simon:
Numerical Investigations on the Effect of Swirling Combuster Exit Flow on HP--Turbine Inlet Flow for the Industrial gas Turbine THM 1304. ASME Gas Turbine Conference, Cincinnati, Ohio, 1993, Paper-No. 93-GT-256. DOI: 10.1115/93-GT-256.
1992
H. J. Dohmen, U. Kahlsdorf, H. Simon: Simulation of the Three--Dimensional Viscous Flow in the Passage Towards the HP-Turbine of an Industrial Gas Turbine. Proceedings of the 1992 FIDAP User Conference, FDI Inc., 1992.
F.-K. Benra: Förderung von Schmutz- bzw. Abwasser mit verstopfungsfreien Kreiselpumpen. Vortrag Universität-GH-Duisburg, 1992.
F.-K. Benra: Berechnung und Konstruktion einer Kreiselpumpenbaureihe für die Förderung von Schmutz- und Rohabwasser. Vortrag FH Dortmund, 1992.
F.-K. Benra: Abwassertransport mit kompakten, verstopfungsfreien Kreiselpumpen. Wasser, Luft und Boden, 9/1992, S.26-31.
1991
Janssen M.; Dohmen H. J.; Grahl K. G.: Computation of 3D Flow Phenomena in Axial Flow Compressor Blade Rows. American Society of Mechanical Engineers 1991 – ASME 1991 International Gas Turbine, V001T01A026, DOI: 10.1115/91-GT-078.
1990
F.-K. Benra: Strömungstechnische Untersuchungen an Kreiselpumpen mit Spiral- und T-Spiralrotoren. Interner bericht, Paul Pleiger Maschinenfabrik GmbH & Co. KG, 1990.
Dohmen H. J.; Janssen M.; Grahl K.G.: The Calculation of Three-Dimensional Parabolic Flows With Arbitrary Boundary Geometries. International Chemical Engineering, Vol-30, 1990.
1987
Dohmen H. J.; Janssen M.; Grahl K. G.: Ein Beitrag zur Berechnung dreidimensionaler parabolischer Strömungen in beliebig berandeten Geometrien. In: Forsch Ing-Wes 53(4), 1987, S. 125–136. DOI: 10.1007/bf02558729.
R.A. Strub, H. Simon et al.: Influence of the Reynolds Number on the Performance of Centrifugal Compressors.
ASME-Gas Turbine Conference, Anaheim, California, 1987, Paper-No. 87-GT-10 and in the Transactions of the ASME-Journal of Turbomachinery, October 1987. DOI: 10.1115/1.3262145.
H. Simon: Design Concept and Performance of a Multistage Integrally Geared Centrifugal Compressor Series for Maximum Efficiencies and Operating Ranges. ASME-Gas Turbine Conference, Anaheim, California, 1987, Paper-No. 87-GT-43.
1986
H. Simon, T. Wallmann, T. Mönk: Improvements in Performance Characteristics of Single-Stage and Multi-Stage Centrifugal Compressors by Simultaneous Adjustments of Inlet Guide Vanes and Diffuser Vanes. ASME-Gas Turbine Conference, Düsseldorf, 1986, Paper-No. 86-GT-127 and in the Transactions of the ASME-Journal of Turbomachinery, January 1987. DOI: 10.1115/1.3262068.
F.-K. Benra: Beitrag zur Berechnung der Strömung in mehrstufigen Axialverdichtern unter besonderer Berücksichtigung der Seitenwandgrenzschichten und der Sekundärströmungen. Dissertation, Universität-GH-Duisburg, 1986.
H. Simon: Systematic Approach to Modern Machinery Design and Plant Equipment. Symposium on Turbocompressors, People's Republic of China, Shenyang, May 1986.
H. Simon: Integrally Geared Centrifugal Compressors, Aero-Thermodynamic Concept and Development of Components. Symposium on Turbocompressors, People's Republic of China, Shenyang, May 1986.
1985
H. Simon: Entwicklungsarbeiten für mehrstufige Getriebeturboverdichter. Turboverdichter-Symposium, Moskau, Oktober 1985.
F.-K. Benra: Beitrag zur Berechnung der reibungsbehafteten Strömung in mehrstufigen Axialverdichtern. VDI-Berichte 572.1, VDI-GET, 1985.
H. Simon: Über die Entwicklung und Erprobung von Turboverdichtern am Beispiel von Prototypentwicklungen: - Turboverdichter für sehr hohes Druckniveau (p_{max.} = 900\,bar) - Hochdruck-Sauerstoff-Turboverdichter} (p_{max.} = 135\,bar). Turboverdichter-Symposium, Moskau, Oktober 1985.
1984
R.A. Strub, H. Simon et al.: Influence of the Reynolds Number on the Performance of Centrifugal Compressors. International Compressed Air and Allied Machinery Commitee (ICAAMC), Zürich, June 1984.
H. Simon, A. Bülskämper: On the Evaluation of Reynolds Number and Relative Surface Roughness Effects on Centrifugal Compressor Performance Based on Systematic Experimental Investigations. ASME-Gas Turbine Conference, Phoenix, 1983 Paper-No. 83-GT-118 and in the Transactions of the ASME-Journal of Engineering for Gas Turbines and Power, April 1984. DOI: 10.1115/1.3239592.
1983
F.-K. Benra, R. Foitzik, K.-G. Grahl: Variable Gittergeometrie in vielstufigen Axialverdichtern. VDI-Berichte Nr. 487, 1983.
H. Simon, E. Rothstein: On the Development of Return Passages of Multi-Stage Centrifugal Compressors. ASME-Applied Mechanics, Bioengineering and Fluids Engineering Conference, Houston, Texas, June 1983, FED-Vol. 3.
1982
F.-K. Benra, R. Foitzik, K.-G. Grahl: Theoretische Untersuchung zur optimalen Verstellung der Geometrie von Verzögerungsgittern. Fortschrittsberichte VDI-Reihe 7, Nr. 65, 1982.
1977
H. Simon: Entwicklung einer Standard--Laufradreihe mit räumlich verwundenen, rückwärtsgekrümmten Schaufeln für stationäre Radialverdichter. VDI-Z 119, Nr. 1/2, 1977.
1976
B. Dittie, J. Schubert, H. Simon: Ein Beitrag zur Kennfeldoptimierung mehrstufiger Axialverdichter bezüglich Wirkungsgrad und Regelbereich. VDI-Tagung “Thermische Strömungsmaschinen'', Düsseldorf, 1976, VDI-Berichte Nr. 264.
J. Schubert, H. Simon: Wirkungsgradterm zur Beurteilung mehrstufiger Radialverdichter. Brennstoff--Wärme--Kraft (BWK), Düsseldorf, 1976.
1975
D. Bohn, H. Simon: Mehrparametrige Approximation der Eichräume und Eichflächen von Unterschall- bzw. Überschall-5-Loch-Sonden. ATM + Meßtechnische Praxis, München, Heft 3, 1975.
1974
H. Simon: IV. Theoretische und experimentelle Untersuchungen an einer neuartigen Überschallverdichterstufe mit "querschnittstabilisiertem Verdichtungsstoß im Laufrad''. TR Nr. 28, 1974.
H. Simon: III. Experimentelle Untersuchung eines überschalldurchströmten Axialverdichterlaufrades und Vergleich mit den Auslegungsergebnissen. TR Nr. 24, 1974.
H. Simon: II. Auslegung eines überschalldurchströmten Axialverdichter-Laufrades. TR Nr. 21, 1974.
H. Simon: I. Betrachtungen zur Auslegung von Überschallverdichterstufen verschiedener Typen: (1) Überschallaufrad - Stoß im Leitrad (2) Stoß im Laufrad (querschnittstabilisiert) - Stoß im Leitrad. TR Nr. 16, 1974.
H. Simon, D. Bohn:
Theoretische und experimentelle Untersuchungen zur Entwicklung einer Überschallverdichterstufe. Forschungsbericht aus der Wehrtechnik / Luft- und Raumfahrt, Bundesministerium der Verteidigung, Dokumentationszentrum der Bundeswehr, Bonn, 1974, BMVg -- FBWT 74-5. Aufsatz in 4 Teilen zum Thema “Entwicklungsarbeiten an Überschallaxialverdichterstufen”, Technische Rundschau, Bern, 66. Jahrgang, 1974.
H. Simon, D. Bohn: A Comparison of Theoretical and Experimental Investigations of Two Different Axial Supersonic Compressors. The Royal Aeronautical Society, London, 2nd International Symposium on Air Breathing Engines, Sheffield, 1974.
H. Simon, D. Bohn: Experimental Investigations of a Recently Developed Supersonic Compressor Stage (Rotor and Stage Performance). ASME-Gas Turbine Conference, Zürich, 1974, Paper-No. 74-GT-116. DOI: 10.1115/74-GT-116.
1973
W. Dettmering, H.E. Gallus, H. Simon, D. Bohn, G.P. Kreutzer: Untersuchungen an Überschallverdichter - Laufrädern und -stufen. Jahresberichte 1971/72 und Abschlußbericht 1973 des Sonderforschungsbereiches 83 "Strömungsmechanik und Thermogasdynamik'' RWTH Aachen.
H. Simon: A Contribution to the Theoretical and Experimental Examination of the Flow Through Plane Supersonic Deceleration Cascades and Supersonic Compressor Rotors. ASME-Gas Turbine Conference, Washington, 1973 Paper-No. 73-GT-17 and in the Transactions of the ASME-Journal of Engineering for Power, July 1973. DOI: 10.1115/1.3445728.
D. Bohn, H. Simon: Überschallströmungen - schlierenoptisch beobachtet. Technische Rundschau, Bern, 65. Jahrgang, Nr. 2, 1973.
D. Bohn, H. Simon: Anwendung des Schlierenverfahrens zur Beobachtung der Durchströmung ebener und rotationssymmetrischer Überschallverzögerungsgitter und der Umströmung von 5-Loch-Kegelsonden. Vortrag zur Sitzung des DGLR-Fachausschusses "Versuchswesen der Strömungsmechanik'' am 23./25. Okt. 1972 in Friedrichshafen DLR-Mitteilung 73-20, Teil 1, 1973, S. 45-62.
1972
B. Becker, H. Simon: Überschallströmung durch feststehende und rotierende Schaufelgitter. Zeitschrift für Flugwissenschaften 20, Heft 1/2, 1972.