This is an old revision of the document!


LEEDCal and LEEDLab

⇒ geometric simulations of complex surface structures

⇒ calibration and correction of LEED pattern for high precision analysis

⇒ numerical fitting the simulated structure to spots found in the LEED pattern (available from Fritz & Sojka GbR)

⇒ can be used for conventional LEED, MCP-LEED, and SPA-LEED, regardless of the brand

LEEDCal

LEEDCal 2013 (v 4.0)

The free LEEDCal software package provides a powerful algorithm to determine and correct systematic distortions in LEED images. Easy to operate via its graphical user interface, LEEDCal will automatically generate a correction matrix upon analyzing a calibration sample (exhibiting a well-known surface structure). This calculated matrix can be saved and applied later on, by using LEEDCal_corr, to rectify all future diffraction patterns recorded with the same LEED device. This works also in batch mode! The results allow accurate interpretation of lattice constants/epitaxial relations when used in combination with the LEEDLab software or by your own methods.

LEEDLab

LEEDLab 2018 (v 1.0) or LEEDLab 2018 (v 1.0) with web_installer

LEEDLab is a software packagemaking it possible to simulate (free) and quantitatively analyze (available from Fritz & Sojka GbR) LEED patterns. It has been developed to enable geometric simulations of complex surface structures, allowing objective determination of the lattice parameters and epitaxial relations. For carefully calibrated devices (using LEEDCal and LEEDCal_corr) an unsurpassed accuracy of typically 1% can be attained.

Required Software/ Installation Instructions

For LEEDLab 2018 the MATLAB Runtime (R2018a (9.4)) is required. It can be installed using the version with web_installer.

For LEEDCal 2013 and the full version of LEEDLab 2018 the MATLAB Runtime (R2013a (8.1)) is required. MCR R2013a (8.1)

After the installation of a MATLAB Runtime a restart of the whole system is recommended.

The Zip-file for LEEDLab 2018 contains LEEDLab__Base.exe, which should be stored in the same folder like the LEEDLab 2018 (v 1.0).exe.

/homes/hp0259/public_html/spaleed/data/attic/software/leedcal_leedlab.1538139406.txt.gz · Last modified: 28.09.2018 14:56 by jenagroup
Back to top
Datenschutz     Impressum