M. Sc. Mangesh Pise

Tel.: +49(0)-201-183-3603
Fax: +49(0)-201-183-2680

Room: R12 S02 H20

mangesh.pise@uni-due.de

Universität Duisburg-Essen

Fakultät für Ingenieurwissenschaften
Abteilung Bauwissenschaften
Institut für Mechanik
Universitätsstraße 12
Raum R12 S02 H20
45141 Essen

 

Research

Focus

  • Phase field modeling for steel fiber reinforced High-Performance Concrete
     
  • Elasto-plastic phase-field modeling of fracture in saturated binary porous media
     
  • Phase-field modeling of microstructure evolution in solidification
     

Projects

  • "Erfassung und Modellierung des Einflusses von Stahlfasern auf die Schädigungsentwicklung von Hochleistungsbetonen unter Ermüdungsbeanspruchung" (Projekt im Rahmen des DFG Schwerpunktprogramms 2020 "Zyklische Schädigungsprozesse in Hochleistungsbetonen im Experimental-Virtual-Lab") SPP2020

Teaching

Lectures

  • Computational Inelasticity (M.Sc.)
  • Advanced Structural Analysis using ANSYS (M.Sc.)

Career

01/ 2015

Masters degree, M.Sc. in Computational Mechanics, University of Duisburg-Essen, Essen, Germany.

seit 2013

Research assistant, Institute of Mechanics, Faculty of Engineering, University of Duisburg-Essen, Essen, Germany.

2012 - 2015

Master course in Computational Mechanics, University of Duisburg-Essen, Essen, Germany.

2010 - 2011

Application engineer in International Tech Center at EagleBurgmann (Pentacle Technologies), Pune, Maharashtra, India

09/ 2009

Bachelors degree, B. Eng. - Bachelor in Mechanical Engineering, Sinhgad College of Engineering, Savitribai Phule Pune University, Pune, Maharashtra, India

2004 - 2009

Engineering studies in Mechanical Engineering, Sinhgad College of Engineering, Savitribai Phule Pune University, Pune, Maharashtra, India

2004

Higher Secondary School Education, Maharashtra, India

 

Publications

> JabRef References output

QuickSearch:   Number of matching entries: 0.

Search Settings

Pise M, Brands D and Schröder J ((Submitted 2024)), "Development and calibration of a phenomenological materialmodel for steel fiber reinforced high performance concrete basedon unit cell calculations", Materials.
BibTeX:
@article{PisBraSch:2023:dac,
  author = {Pise, M. and Brands, D. and Schröder, J.},
  title = {Development and calibration of a phenomenological materialmodel for steel fiber reinforced high performance concrete basedon unit cell calculations},
  journal = {Materials},
  year = {(Submitted 2024)}
}
Pise M, Schröder J, Brands D, Gebuhr G and Anders S (2023), "Phase-field modeling for fracture in steel fiber reinforced high performance concrete during low-cycle fatigue", International Journal of Plasticity, Damage and Fracture. Vol. 1(1), pp. 1-11.
BibTeX:
@article{PisSchBraGebAnd:2023:pfmff,
  author = {M. Pise and J. Schröder and D. Brands and G. Gebuhr and S. Anders},
  title = {Phase-field modeling for fracture in steel fiber reinforced high performance concrete during low-cycle fatigue},
  journal = {International Journal of Plasticity, Damage and Fracture},
  year = {2023},
  volume = {1},
  number = {1},
  pages = {1-11}
}
Pise M, Brands D, Schröder J, Gebuhr G and Anders S (2023), "Virtual experiments for steel fiber-reinforced high performance concrete based on unit cell calculations", In 11th International Conference on Fracture Mechanics of Concrete and Concrete Structures. , pp. 1-12.
BibTeX:
@conference{PisBraSchGebAnd:2023:ves,
  author = {M. Pise and D. Brands and J. Schröder and G. Gebuhr and S. Anders},
  editor = {J. M. Chandra Kishen, A. Ramaswamy, S. Ray and R. Vidyasagar},
  title = {Virtual experiments for steel fiber-reinforced high performance concrete based on unit cell calculations},
  booktitle = {11th International Conference on Fracture Mechanics of Concrete and Concrete Structures},
  year = {2023},
  pages = {1-12},
  doi = {doi.org/10.21012/FC11.092375}
}
Pise M, Gebuhr G, Brands D, Schröder J and Anders S (2023), "Phase-field modeling for failure behavior of reinforced ultra-high performance concrete at low cycle fatigue", Proceedings in Applied Mathematics and Mechanics. Vol. 23(1), pp. e202300233 (8 pages).
BibTeX:
@article{PisGebBraSchAnd:2023:pfmffb,
  author = {M. Pise and G. Gebuhr and D. Brands and J. Schröder and S. Anders},
  title = {Phase-field modeling for failure behavior of reinforced ultra-high performance concrete at low cycle fatigue},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2023},
  volume = {23},
  number = {1},
  pages = {e202300233 (8 pages)},
  doi = {10.1002/pamm.202300233}
}
Pise M, Schröder J, Brands D, Gebuhr G and Anders S (2023), "Phase-field model for degradation of steel fiber reinforced ultra-high performance concrete during low-cycle fatigue", In 11th International Conference on Fracture Mechanics of Concrete and Concrete Structures. , pp. 1-12.
BibTeX:
@conference{PisSchBraGebAnd:2023:pfmfd,
  author = {M. Pise and J. Schröder and D. Brands and G. Gebuhr and S. Anders},
  editor = {J. M. Chandra Kishen, A. Ramaswamy, S. Ray and R. Vidyasagar},
  title = {Phase-field model for degradation of steel fiber reinforced ultra-high performance concrete during low-cycle fatigue},
  booktitle = {11th International Conference on Fracture Mechanics of Concrete and Concrete Structures},
  year = {2023},
  pages = {1-12},
  doi = {doi.org/10.21012/FC11.092383}
}
Gebuhr G, Anders S, Pise M, Brands D and Schröder J (2023), "Approach for detection of fatigue phases using the example of high-performance concrete", In 11th International Conference on Fracture Mechanics of Concrete and Concrete Structures. , pp. 1-12.
BibTeX:
@conference{GebAndPisBraSch:2023:afd,
  author = {G. Gebuhr and S. Anders and M. Pise and D. Brands and J. Schröder},
  editor = {J. M. Chandra Kishen, A. Ramaswamy, S. Ray and R. Vidyasagar},
  title = {Approach for detection of fatigue phases using the example of high-performance concrete},
  booktitle = {11th International Conference on Fracture Mechanics of Concrete and Concrete Structures},
  year = {2023},
  pages = {1-12},
  doi = {doi.org/10.21012/FC11.092394}
}
Gebuhr G, Alvaro MA, Pise M, Anders S, Vicente M, Brands D and Schröder J (2023), "Predictive power of crack opening rate for flexural fatigue life of steel fiber-reinforced high and ultra-high performance concrete", In 11th International Conference on Fracture Mechanics of Concrete and Concrete Structures. , pp. 1-12.
BibTeX:
@conference{GebAlvPisAndVicBraSch:2023:ppo,
  author = {G. Gebuhr and M. A. Alvaro and M. Pise and S. Anders and M. Vicente and D. Brands and J. Schröder},
  editor = {J. M. Chandra Kishen, A. Ramaswamy, S. Ray and R. Vidyasagar},
  title = {Predictive power of crack opening rate for flexural fatigue life of steel fiber-reinforced high and ultra-high performance concrete},
  booktitle = {11th International Conference on Fracture Mechanics of Concrete and Concrete Structures},
  year = {2023},
  pages = {1-12},
  doi = {doi.org/10.21012/FC11.092370}
}
Schröder J, Pise M and Brands D (2023), "Ein Phasenfeldmodell zur Berechnung der Ermüdung von faserverstärktem Hochleistungsbeton bei niedrigen Zyklen", In 27. Dresdner Baustatik seminar - Realität - Modellierung - Tragwerksplanung. Union Druckerei Dresden GmbH.
BibTeX:
@inproceedings{SchPisBra:2023:epz,
  author = {J. Schröder and M. Pise and D. Brands},
  title = {Ein Phasenfeldmodell zur Berechnung der Ermüdung von faserverstärktem Hochleistungsbeton bei niedrigen Zyklen},
  booktitle = {27. Dresdner Baustatik seminar - Realität - Modellierung - Tragwerksplanung},
  publisher = {Union Druckerei Dresden GmbH},
  year = {2023}
}
Pise M., Brands D., Schröder J., Gebuhr G. and Anders S. (2022), "Phenomenological material model for damage in steel-fiber reinforced high performance concrete during low cycle fatigue", Proceedings in Applied Mathematics and Mechanics. Vol. 22(1), pp. e202200236 (6 pages).
BibTeX:
@article{PisBraSchGebAnd:2022:pmm,
  author = {M.~Pise and D.~Brands and J.~Schröder and G.~Gebuhr and S.~Anders},
  title = {Phenomenological material model for damage in steel-fiber reinforced high performance concrete during low cycle fatigue},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2022},
  volume = {22},
  number = {1},
  pages = {e202200236 (6 pages)}
  doi = {https://doi.org/10.1002/pamm.202200236}
}
  
  
Schröder J., Pise M., Brands D., Gebuhr G. and Anders S. (2022), "Phase-field modeling of fracture in high performance concrete during low-cycle fatigue: numerical calibration and experimental validation", Computer methods in applied mechanics and engineering. Vol. 398, pp. 115181.
BibTeX:
@article{SchPisBraGebAnd:2021:pfm,
  author = {Schröder, J. and Pise, M. and Brands, D. and Gebuhr, G. and Anders, S.},
  title = {Phase-field modeling of fracture in high performance concrete during low-cycle fatigue: numerical calibration and experimental validation},
  journal = {Computer methods in applied mechanics and engineering},
  year = {2022},
  volume = {398},
  pages = {115181},
  doi = {https://doi.org/10.1016/j.cma.2022.115181}
}
 
  
Gebuhr G., Pise M., Anders S., Brands D. and Schröder J. (2022), "Damage evolution of steel fiber reinforced high performance concrete in low-cycle flexural fatigue: numerical modeling and experimental validation", Materials. Vol. 15(3), pp. 1179.
BibTeX:
@article{GebPisAndBraSch:2022:deo,
  author = {Gebuhr, G. and Pise, M. and Anders, S. and Brands, D. and Schröder, J.},
  title = {Damage evolution of steel fiber reinforced high performance concrete in low-cycle flexural fatigue: numerical modeling and experimental validation},
  journal = {Materials},
  year = {2022},
  volume = {15},
  number = {3},
  pages = {1179},
  doi = {https://doi.org/10.3390/ma15031179}
}
Pise M., Brands D., Schröder J., Gebuhr G. and Anders S. (2022), "Macroscopic model based on application of representative volume element for steel fiber reinforced high performance concrete", In Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa, Zingoni, A. (Ed.), CRC Press, Oxon, United Kingdom, pp. 1300-1306.
BibTeX:
@incollection{PisBraSchGebAnd:2022:mmb,
  author = {M.~Pise and D.~Brands and J.~Schröder and G.~Gebuhr and S.~Anders},
  editor = {A. Zingoni},
  title = {Macroscopic model based on application of representative volume element for steel fiber reinforced high performance concrete},
  booktitle = {Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa},
  publisher = {CRC Press, Oxon, United Kingdom},
  pages = {1300-1306}
  year = {2022}
}
Gebuhr G., Pise M., Anders S., Brands D. and Schröder J. (2022), "Damage development of steel fibre reinforced high performance concrete in high-cycle fatigue tests", In Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa, Zingoni, A. (Ed.), CRC Press, Oxon, United Kingdom, pp. 1327–1332.
BibTeX:
@incollection{GebPisAndBraSch:2022:ddo,
  author = {G.~Gebuhr and M.~Pise and S.~Anders and D.~Brands and J.~Schröder},
  editor = {A. Zingoni},
  title = {Damage development of steel fibre reinforced high performance concrete in high-cycle fatigue tests},
  booktitle = {Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa},
  publisher = {CRC Press, Oxon, United Kingdom},
  pages = {1327–1332}
  year = {2022}
}
Schröder J., Pise M., Brands D., Gebuhr G. and Anders S. (2022), "Phase-field modeling for damage in high performance concrete at low cycle fatigue", In Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa, Zingoni, A. (Ed.), CRC Press, Oxon, United Kingdom, pp. 1297-1299.
BibTeX:
@incollection{SchPisBraGebAnd:2022:pfm,
  author = {J.~Schröder and M.~Pise and D.~Brands and G.~Gebuhr and S.~Anders},
  editor = {A. Zingoni},
  title = {Phase-field modeling for damage in high performance concrete at low cycle fatigue},
  booktitle = {Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the Eigth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022), Cape Town, South Africa},
  publisher = {CRC Press, Oxon, United Kingdom},
  pages = {1297-1299}
  year = {2022}
}
Pise M., Brands D., Schröder J., Gebuhr G. and Anders S. (2021), "Macroscopic model for steel fiber reinforced high performance concrete based on unit cell calculations", Proceedings in Applied Mathematics and Mechanics. Vol. 21(1), pp. e202100180 (4 pages).
BibTeX:
@article{PisBraSchGebAnd:2021:mmf,
  author = {M.~Pise and D.~Brands and J.~Schröder and G.~Gebuhr and S.~Anders},
  title = {Macroscopic model for steel fiber reinforced high performance concrete based on unit cell calculations},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2021},
  volume = {21},
  number = {1},
  pages = {e202100180 (4 pages)}
  doi = {https://doi.org/10.1002/pamm.202100180}
}
Storm J., Pise M., Brands D., Schröder J. and Kaliske M. (2021), "A comparative study of micro-mechanical models for fiber pullout behavior of reinforced high performance concrete", Engineering Fracture Mechanics. Vol. 243, pp. 107506.
BibTeX:
@article{StoPisBraSchKal:2021:acs,
  author = {Storm, J. and Pise, M. and Brands, D. and Schröder, J. and Kaliske M.},
  title = {A comparative study of micro-mechanical models for fiber pullout behavior of reinforced high performance concrete},
  journal = {Engineering Fracture Mechanics},
  year = {2021},
  volume = {243},
  pages = {107506},
  doi = {https://doi.org/10.1016/j.engfracmech.2020.107506}
}
Pise M., Brands D., Schröder J., Gebuhr G. and Anders S. (2020), "On the application of representative volume elements for steel fiber reinforced high performance concrete - a numerical study", Proceedings in Applied Mathematics and Mechanics. Vol. 20(1), pp. e202000323 (4 pages).
BibTeX:
@article{PisBraSchGebAnd:2020:ota,
  author = {M.~Pise and D.~Brands and J.~Schröder and G.~Gebuhr and S.~Anders},
  title = {On the application of representative volume elements for steel fiber reinforced high performance concrete - a numerical study},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2020},
  volume = {20},
  number = {1},
  pages = {e202000323 (4 pages)}
  doi = { https://doi.org/10.1002/pamm.202000323}
}
Pise M., Brands D., Sarhil M., Schröder J., Gebuhr G. and Anders S. (2019), "Numerical calibration of elasto-plastic phase-field modeling of fracture for experimental pullout tests of single steel fibres embedded in high-performance concrete", In Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, Zingoni, A. (Ed.), CRC Press, London, pp. 1391-1396.
BibTeX:
@incollection{PisBraSarSchGebAnd:2019:nco,
  author = {M.~Pise and D.~Brands and M.~Sarhil and J.~Schröder and G.~Gebuhr and S.~Anders},
  editor = {A. Zingoni},
  title = {Numerical calibration of elasto-plastic phase-field modeling of fracture for experimental pullout tests of single steel fibres embedded in high-performance concrete},
  booktitle = {Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa},
  publisher = {CRC Press, London},
  pages = {1391-1396}
  year = {2019}
}
Gebuhr G., Pise M., Sarhil M., Anders S., Brands D. and Schröder J. (2019), "Deterioration development of steel fibre reinforced high performance concrete in low-cycle fatigue", In Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, Zingoni, A. (Ed.), CRC Press, London.
BibTeX:
@incollection{GebPisSarAndBraSch:2019:ddo,
  author = {G.~Gebuhr and M.~Pise and M.~Sarhil and S.~Anders and D.~Brands and J.~Schröder and},
  editor = {A. Zingoni},
  title = {Deterioration development of steel fibre reinforced high performance concrete in low-cycle fatigue},
  booktitle = {Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa},
  publisher = {CRC Press, London},
  pages = {6 pages}
  year = {2019}
}
Pise M., Brands D., Gebuhr G., Sarhil M., Schröder J. and Anders S. (2019), "Elasto-plastic phase-field model for pullout tests of steel fiber embedded in high-performance concrete: numerical calibration and experimental validation", Proceedings in Applied Mathematics and Mechanics. Vol. 19(1), pp. e201900255 (4 pages).
BibTeX:
@article{PisBraGebSchAnd:2018:epp,
  author = {M.~Pise and D.~Brands and G.~Gebuhr and M.~Sarhil and J.~Schröder and S.~Anders},
  title = {Elasto-plastic phase-field model for pullout tests of steel fiber embedded in high-performance concrete: numerical calibration and experimental validation},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2019},
  volume = {19},
  number = {1},
  pages = {e201900255 (4 pages)}
  doi = {https://doi.org/10.1002/pamm.201900255}
}
Gebuhr G., Pise M., Sarhil M., Anders S., Brands D. and Schröder J. (2019), "Analysis and evaluation of single fibre pull-out behaviour of hooked steel fibres embedded in high performance concrete for calibration of numerical models", Structural Concrete. Vol. 20(4), pp. 1254-1264.
BibTeX:
@article{GebPisSarAndBraSch:2019:aae,
  author = {Gebuhr, G. and Pise, M. and Sarhil, M. and Anders, S. and Brands, D. and Schröder, J.},
  title = {Analysis and evaluation of single fibre pull-out behaviour of hooked steel fibres embedded in high performance concrete for calibration of numerical models},
  journal = {Structural Concrete},
  year = {2019},
  volume = {20},
  number = {4},
  pages = {1254-1264},
  doi = { https://doi.org/10.1002/suco.201900034}}
  
Gebuhr G., Pise M., Sarhil M., Anders S., Brands D. and Schröder J. (2019), "Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modeling", Proceedings of the fib Symposium., In Concrete Innovations in Materials, Design and Structures, 16th fib Symposium Proceedings. FIB CEB-FIP.
BibTeX:
@incollection{GebPisSarAndBraSch:2019:daa,
  author = {Gebuhr, G. and Pise, M. and Sarhil, M. and Anders, S. and Brands, D. and Schröder, J.},
  editor = {Derkowski, W. et al.},
  title = {Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modeling},
  booktitle = {Concrete Innovations in Materials, Design and Structures, 16th fib Symposium Proceedings},
  journal = {Proceedings of the fib Symposium},
  publisher = {FIB CEB-FIP},
  year = {2019}
}
Pise M., Bluhm J. and Schröder J. (2019), "Elasto-plastic phase-field model of hydraulic fracture in saturated binary porous media", International Journal for Multiscale Computational Engineering. Vol. 17(2), pp. 201-221.
BibTeX:
@article{PisBluSch:2019:epp,
  author = {Pise, M. and Bluhm, J. and Schröder, J.},
  title = {Elasto-plastic phase-field model of hydraulic fracture in saturated binary porous media},
  journal = {International Journal for Multiscale Computational Engineering},
  year = {2019},
  volume = {17},
  number = {2},
  pages = {201-221},
  doi = { https://doi.org/10.1615/IntJMultCompEng.2019027066}}
}
Pise M., Brands D., Gebuhr G., Schröder J. and Anders S. (2018), "Analysis of pullout behavior of single steel fibers embedded in concrete using phase-field modeling", Proceedings in Applied Mathematics and Mechanics. Vol. 18(1), pp. e201800401 (4 pages).
BibTeX:
@article{PisBraGebSchAnd:2018:aop,
  author = {M.~Pise and D.~Brands and G.~Gebuhr and J.~Schröder and S.~Anders},
  title = {Analysis of pullout behavior of single steel fibers embedded in concrete using phase-field modeling},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2018},
  volume = {18},
  number = {1},
  pages = {e201800401 (4 pages)}
  doi = {https://doi.org/10.1002/pamm.201800401}}
}
Pise M., Bluhm J. and Schröder J. (2017), "A phase-field model of hydraulic fracture in saturated binary porous media", Proceedings in Applied Mathematics and Mechanics. Vol. 17(1), pp. e201710239 (2 pages).
BibTeX:
@article{PisBluSch:2017:apf,
  author = {M.~Pise and J.~Bluhm and J.~Schröder},
  title = {A phase-field model of hydraulic fracture in saturated binary porous media},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2017},
  volume = {17},
  number = {1},
  pages = {e201710239 (2 pages)}
  doi = {https://doi.org/10.1002/pamm.201710239}}
}
Pise, M. (2015), "Phase-field modeling of microstructure evolution in solidification". Institut of Mechanics, University of Duisburg-Essen.
BibTeX:
@techreport{Pise:2015:pfm,
  author = {Pise, M.},
  title = {Phase-field modeling of microstructure evolution in solidification},
  school = {Institut of Mechanics, University of Duisburg-Essen},
  year = {2015}
}

Stand: 09.02.2022