Personensuche
Personensuche
Es wurde 1 Person gefunden.
Anschrift
Lotharstraße 1
47057 Duisburg
47057 Duisburg
Raum
MA 222
Telefon
E-Mail
Webseite
Funktionen
-
Universitätsprofessor/in, Konstruktion und Kunststoffmaschinen
Aktuelle Veranstaltungen
Keine aktuellen Veranstaltungen.
Vergangene Veranstaltungen (max. 10)
Die folgenden Publikationen sind in der Online-Universitätsbibliographie der Universität Duisburg-Essen verzeichnet. Weitere Informationen finden Sie gegebenenfalls auch auf den persönlichen Webseiten der Person.
-
Neuartige Werkzeuggeometrien für die Blasfolienextrusion unter Verwendung additiver FertigungstechnikIn: Zeitschrift Kunststofftechnik Jg. 2020 (2020) Nr. 3, S. 81 - 107ISSN: 1864-2217
-
Development of a new measurement concept for the process-oriented characterization of rheological material propertiesIn: AIP Conference Proceedings / Europe/Africa Regional Conference of the Polymer Processing Society (PPS); Dresden; Germany; 27 - 29 June 2017 Jg. 2055 (2019) S. 070024ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/ (Open Access)
-
Integration zeitabhängiger Materialmodelle in CFD-Simulationen von ExtrusionswerkzeugenIn: Zeitschrift Kunststofftechnik (2019) Nr. 4, S. 288 - 313ISSN: 1864-2217
-
Knowledge-based material selection for injection-molded, thermoplastic partsIn: AIP Conference Proceedings / Europe/Africa Regional Conference of the Polymer Processing Society (PPS); Dresden; Germany; 27 - 29 June 2017 Jg. 2055 (2019) S. 070028ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/ (Open Access)
-
Leistungssteigerung in der High-Speed-ExtrusionIn: Zeitschrift Kunststofftechnik Jg. 15 (2019) Nr. 3, S. 245 - 270ISSN: 1864-2217
-
Waste heat utilization for granule preheating in extrusion processes to increase energy efficiencyIn: AIP Conference Proceedings / Europe/Africa Regional Conference of the Polymer Processing Society (PPS); Dresden; Germany; 27 - 29 June 2017 Jg. 2055 (2019) S. 070025ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/ (Open Access)
-
A process-oriented scale-up/scale-down strategy for industrial blown film processes : Theory and experimentsIn: Journal of Plastic Film and Sheeting Jg. 34 (2018) Nr. 3, S. 324 - 349ISSN: 1530-8014; 8756-0879Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Anomaly detection in injection molding process data based on unsupervised learningIn: Zeitschrift Kunststofftechnik Jg. 14 (2018) Nr. 5, S. 301 - 347ISSN: 1864-2217Online Volltext: dx.doi.org/
-
Methodik zur simulation von wandnahen strömungen am beispiel eines farbwechsel-prozessesIn: Zeitschrift Kunststofftechnik Jg. 14 (2018) Nr. 5, S. 279 - 300ISSN: 1864-2217Online Volltext: dx.doi.org/ (Open Access)
-
Lifetime prediction with nonlinear damage accumulation based on material stressing part I : Introduction of a general ProcedureIn: KGK Kautschuk Gummi Kunststoffe Jg. 70 (2017) Nr. 4, S. 25 - 29ISSN: 0948-3276
-
Lifetime prediction with nonlinear damage accumulation based on material stressing part II : Application to elastomer couplingsIn: KGK Kautschuk Gummi Kunststoffe Jg. 70 (2017) Nr. 10, S. 55 - 60ISSN: 0948-3276
-
CFD-Simulation der Kunststoffplastifizierung in einem Extruder mit durchgehend genutetem Zylinder und BarriereschneckeIn: Zeitschrift für Kunststofftechnik Jg. 2016 (2016) Nr. 3, S. 205 - 238ISSN: 1864-2217Online Volltext: dx.doi.org/
-
Modellierung konsistenter rheologischer und thermodynamischer Materialdaten für die ProzesssimulationIn: Zeitschrift Kunststofftechnik Jg. 6 (2016) S. 517 - 549ISSN: 1864-2217Online Volltext: dx.doi.org/
-
A viscosity model for technical polymers describing chemical and physical agingIn: Polymer engineering & science Jg. 55 (2015) Nr. 7, S. 1628 - 1633ISSN: 1548-2634; 0032-3888Online Volltext: dx.doi.org/
-
Alternative Plastifizierkonzepte für die High-Speed-Extrusion – Der High-Speed-S-Truder mit rotierender SchneckenhülseIn: Zeitschrift Kunststofftechnik/Journal of Plastics Technology (2015) Nr. 5, S. 328 - 354ISSN: 1864-2217
-
Qualitätsregelung beim Spritzgießen (Teil 1) : Rheologische Untersuchung prozessrelevanter AlterungseinflüsseIn: Zeitschrift Kunststofftechnik/Journal of Plastics Technology (2015) Nr. 2, S. 2 - 130ISSN: 1864-2217
-
Qualitätsregelung beim Spritzgießen (Teil 2) = Quality control in injection molding (part 2) : Adaptive, druckgeregelte Prozessführung = adaptive, pressure controlled process managementIn: Zeitschrift Kunststofftechnik = Journal of plastics technology Jg. 2015 (2015) Nr. 3, S. 157 - 179ISSN: 1864-2217Online Volltext: dx.doi.org/
-
Determination of robust material qualities and processing conditions for laser sintering of polyamide 12In: Polymer Engineering & Science Jg. 54 (2014) Nr. 7, S. 1540 - 1554ISSN: 0032-3888; 1548-2634Online Volltext: dx.doi.org/
-
Useful process data from the injection molding machineIn: Kunststoffe: Kunststoffe international Jg. 104 (2014) Nr. 2, S. 42 - 46ISSN: 1862-4243; 0945-0084
-
A calibrated simulation model for blown film extrusionIn: Polymer Engineering & Science (2013)ISSN: 0032-3888; 1548-2634
-
Optimized build-up process of film rolls by enhanced reversion controlIn: Zeitschrift Kunststofftechnik (2013) Nr. 4, S. 160 - 177ISSN: 1864-2217
-
Dreidimensionale, instationäre Strömungs-simulation zur Analyse von Farb- und Material-wechselvorgängenIn: Zeitschrift Kunststofftechnik/Journal of Plastics Technology (2012) Nr. 5, S. 468 - 489ISSN: 1864-2217
-
Ein Weg zu verbesserten elektrischen Eigenschaften von BipolarplattenIn: Kunststoffe Jg. 2012 (2012) Nr. 10, S. 159 - 162ISSN: 0023-5563
-
Influence of surface characteristics on fatigue behaviour of laser sintered plasticsIn: Rapid Prototyping Journal Jg. 18 (2012) Nr. 2, S. 161 - 171ISSN: 1355-2546Online Volltext: dx.doi.org/
-
Prediction of PA12 Melt Viscosity in Laser Sintering by a Time and Temperature Dependent Rheological ModelIn: RTejournal - Forum für Rapid Technologie Jg. 9 (2012)ISSN: 1614-0923
-
Two colors in one dieIn: Kunststoffe: Kunststoffe international Jg. 102 (2012) Nr. 4, S. 37 - 40ISSN: 1862-4243; 0945-0084
-
When efficiency potentials remain unused due to uncertaintyIn: Kunststoffe: Kunststoffe international Jg. 102 (2012) Nr. 6, S. 54 - 56ISSN: 1862-4243; 0945-0084
-
Indices for an objective efficiency comparison?In: Kunststoffe: Kunststoffe international Jg. 101 (2011) Nr. 7, S. 22 - 25ISSN: 1862-4243; 0945-0084
-
"KoAx-S-Truder" - Ein neues Extruderkonzept mit Koaxialschnecken und SchmelzetrennungIn: Zeitschrift Kunststofftechnik/Journal of Plastics Technology (2010) Nr. 1, S. 1 - 18ISSN: 1864-2217
-
Ein alternatives Plastifizierkonzept unter Verwendung von ErdgasIn: Zeitschrift Kunststofftechnik/Journal of Plastics Technology (2010) Nr. 2, S. 92 - 111ISSN: 1864-2217
-
Melt flow a : Circular distributorIn: Kunststoffe: Kunststoffe international Jg. 100 (2010) Nr. 9, S. 108 - 112ISSN: 1862-4243; 0945-0084
-
Verstetigung der Leistungsaufnahme bei zyklischen Prozessen durch integriertes Speicher-Aktor-ModulIn: Zeitschrift Kunststofftechnik/Journal of Plastics Technology (2010) Nr. 6, S. 270 - 291ISSN: 1864-2217
-
Automatisierte Optimierung von Strömungskanälen zur Verbesserung des Spülverhaltens von Kunststoff-Extrusionswerkzeugen = Automated optimization of flow-channels to improve the purge behavior of extrusion diesIn: Zeitschrift Kunststofftechnik = Journal of plastics technology Jg. 5 (2009) Nr. 2, S. 131 - 152ISSN: 1864-2217
-
Vielseitige Verpackung : numerische Strömungssimulation für effizientere KunststoffverarbeitungsprozesseIn: Essener Unikate: Berichte aus Forschung und Lehre (2007) Nr. 31: Ingenieurwissenschaften - Von Nano bis Giga: : Computersimulationen, S. 110 - 121ISSN: 0944-6060Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
An experimental study on process-oriented scale-up / scale-down in blown film extrusionIn: Proceedings of PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society / PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society, 18–22 November 2019, Pretoria, South Africa / Ray, Suprakas Sinha (Hrsg.) 2020, S. 020014ISBN: 978-0-7354-4019-7 ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/ Online Volltext (Open Access)
-
A new scale-up / scale-down method for the blown film extrusionIn: PROCEEDINGS OF PPS-33 : The 33rd International Conference of the Polymer Processing Society – Conference Papers / 33rd International Conference of the Polymer Processing Society; 10–14 December 2017; Cancun, Mexico; Manero, Octavio; Calderas, Fausto Jg. 2139 2019, Nr. 1, S. 040001ISBN: 9780735418820Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Local mean age of melt : New approaches for die optimisationIn: AIP Conference Proceedings / 34th International Conference of the Polymer Processing Society, PPS 2018; Taipei; Taiwan; 21 - 25 May 2018 2019, S. 030011ISBN: 9780735417939Online Volltext: dx.doi.org/
-
Simulation based investigations on dissipation reduction in grooved melting zones using a high-speed-extruderIn: AIP Conference Proceedings / 34th International Conference of the Polymer Processing Society, PPS 2018; Taipei; Taiwan; 21 - 25 May 2018 2019, S. 030009ISBN: 9780735417939Online Volltext: dx.doi.org/
-
Two concepts for extending the 3D-simulation technique of melting processes in high-speed-extrusion based on a custom material modelIn: Annual Technical Conference - ANTEC: Conference Proceedings / 77th Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2019, Detroit, United States, 18 - 21 March 2019 2019
-
Using 3D injection molding simulation to explain emerging two- and three-dimensional surface structures of ABS and PC/ABS parts within the process of electroplating on plasticsIn: AIP Conference Proceedings / 34th International Conference of the Polymer Processing Society, PPS 2018; Taipei; Taiwan; 21 - 25 May 2018 2019, S. 030002ISBN: 9780735417939Online Volltext: dx.doi.org/
-
Using secondary air cooling in blown film extrusion : Concept design and experimental studyIn: Annual Technical Conference - ANTEC: Conference Proceedings / 77th Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2019; Detroit; United States; 18 - 21 March 2019 2019, S. 1000 - 1004ISBN: 978-1-7138-0198-6Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
3D surface characterization of etched, injection molded parts before a follow up electroplating processIn: ANTEC 2018: Conference Proceedings / 2018 Society of Plastics Engineers Annual Technical Conference, Orange County Convention CenterOrlando; United States, 7 May 2018 through 10 May 2018 2018
-
Automatic anomaly detection and root cause analysis for holistic process monitoring and control in injection moldingIn: Annual Technical Conference - ANTEC: Conference Proceedings / ANTEC 2018; Orlando; United States; 7 - 10 May 2018 Jg. May 2018
-
Knowledge-based Product Planning and Designing of Injection-molded PartsIn: Annual Technical Conference - ANTEC: Conference Proceedings / ANTEC 2018; Orlando; United States; 7 - 10 May 2018 2018
-
Computer aided output improvment of a high capacity blown film extrusion lineIn: Annual Technical Conference - ANTEC, Conference Proceedings / 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017, Hilton Anaheim777 Convention WayAnaheim, United States, 8 May 2017 through 10 May 2017 2017, S. 1262 - 1267ISBN: 978-0-692-88309-9
-
Digitalisierung der Spritzgießproduktion intelligente Maschinen für effiziente Prozesse nutzenIn: Spritzgießen 2017 / VDI Wissensforum GmbH (Hrsg.) 2017, S. 55 - 66ISBN: 978-3-18-234349-3; 978-3-18-244349-0Online Volltext: dx.doi.org/
-
Effects of processing parameters on the surface structure of injection molded parts : Application of image analysis for the investigation of 2D cavern structures with respect to electroplating quality requirementsIn: Annual Technical Conference - ANTEC, Conference Proceedings / 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017, Hilton Anaheim777 Convention WayAnaheim, United States, 8 May 2017 through 10 May 2017 2017, S. 1478 - 1482ISBN: 978-0-692-88309-9
-
Knowledge-based approach for an automatic rheological optimization of injection-molded partsIn: Proceedings of PPS-32: the 32nd International Conference of the Polymer Processing Society - conference papers / 32nd International Conference of the Polymer Processing Society, France; 25 July 2016 through 29 July 2016 / Maazouz, Abderrahim (Hrsg.) 2017, S. 140010ISBN: 9780735416062Online Volltext: dx.doi.org/
-
Knowledge-based support for the designer regarding injection-molded Part designIn: 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers: SPE ANTEC Anaheim 2017 / Annual technical conference of the Society of Plastics Engineers ; ANTEC ; Plastics Conference ; 8. - 10. Mai 2017, Anaheim, Californien, USA 2017, S. 2203 - 2207ISBN: 978-0-692-88309-9
-
Knowledge-based, iterative approach for an automatic cavity balancing for injection moldingIn: 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers: SPE ANTEC Anaheim 2017 / Annual technical conference of the Society of Plastics Engineers ; ANTEC ; Plastics Conference ; 8. - 10. Mai 2017, Anaheim, Californien, USA 2017, S. 1520 - 1525ISBN: 978-0-692-88309-9
-
Virtual and experimental comparison of different dynamic mixing devices for single screw extrusionIn: 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers / 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017, Hilton Anaheim777 Convention WayAnaheim, United States, 8 May 2017 through 10 May 2017 2017, S. 1194 - 1199ISBN: 978-0-692-88309-9
-
Wissensbasierte Absicherung virtueller Lebensdauerprognosen von ElastomerbauteilenIn: 15. Gemeinsames Kolloquium Konstruktionstechnik 2017: Interdisziplinäre Produktentwicklung / 15. Gemeinsames Kolloquium Konstruktionstechnik "Interdisziplinäre Produktentwicklung", 15. KT-Kolloquium, 05.10.-06.10.2017, Duisburg / Brökel, Klaus; Grote, Karl-Heinrich; Stelzer, Ralph; Rieg, Frank; Feldhusen, Jörg; Müller, Norbert; Köhler, Peter (Hrsg.) 2017, S. 121 - 130ISBN: 978-3-940402-15-8(Open Access)
-
An experimental comparison between a novel and a conventional cooling system for the blown film processIn: Proceedings of PPS-31: the 31st International Conference of the Polymer Processing Society - conference papers / International Conference of the Polymer Processing Society, Jeju Island, Korea, 7-11 June 2015 / Rhee, Byungohk (Hrsg.) 2016ISBN: 978-0-7354-1360-3Online Volltext: dx.doi.org/
-
Analysis of batch-related influences on injection molding processes viewed in the context of electro plating quality demandsIn: Proceedings of PPS-31: the 31st International Conference of the Polymer Processing Society - conference papers / Rhee, Byungohk; International Conference of the Polymer Processing Society, Jeju Island, Korea, 7-11 June 2015 2016ISBN: 9780735413603Online Volltext: dx.doi.org/
-
Characteristics of the mold filling simulation for a variothermal injection molding process with highly filled thermoplasticsIn: Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: conference papers / Regional Conference. Polymer Processing Society, Graz, Austria, 21-25 September 2015 / Holzer, Clemens H.; Payer, Martin (Hrsg.) 2016ISBN: 978-0-7354-1441-9Online Volltext: dx.doi.org/
-
Inline calculation tool for the determination of the changeover time for color and material changes in polymer processingIn: Proceedings of PPS-31: the 31st International Conference of the Polymer Processing Society - conference papers / Rhee, Byungohk; International Conference of the Polymer Processing Society, Jeju Island, Korea, 7-11 June 2015 2016ISBN: 9780735413603Online Volltext: dx.doi.org/
-
A numercial verification and experimental validation of the multi-jet cooling system for the blown film applicationIn: Annual Technical Conference - ANTEC, Conference Proceedings / ANTEC 2015, Orlando, USA, 23. - 25.03.2015 2015, S. 1067 - 1072ISBN: 978-0-9850112-7-7
-
A numerical verification and experimental validation of the multi-jet cooling system for the blown film applicationIn: Proceedings of the technical conference & exhibition: Orlando, Florida, USA March 23-25, 2015 / ANTEC 2015 2015ISBN: 978-0-9850112-7-7
-
Advantages and potentials of a blown film cooling system with a complete housing of the tube formation zoneIn: Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: Conference Papers / Regional Conference. Polymer Processing Society, Graz, Austria, 21-25 September 2015 2015ISBN: 978-0-7354-1441-9Online Volltext: dx.doi.org/
-
Development of a high speed extrusion concept using a floating screw sleeve for solid-melt-separationIn: Proceedings of PPS-30: the 30th International Conference of the Polymer Processing Society - conference papers / International Conference of the Polymer Processing Society, Cleveland, Ohio, USA, 6 - 12 June 2014 / Jana, Sadhan C. (Hrsg.) 2015ISBN: 978-0-7354-1309-2 ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/ (Open Access)
-
Injection molding simulation with variothermal mold temperature control of highly filled polyphenylene sulfideIn: Proceedings of PPS-30: Conference Papers / 30th International Conference of the Polymer Processing Society, 6-12 June 2014, Ohio, USA / Jana, Sadhan C. (Hrsg.) 2015, S. 050013ISBN: 978-0-7354-1309-2Online Volltext: dx.doi.org/
-
Konsistente Materialdaten für die SpritzgießsimulationIn: Sigmasoft Anwendertreffen 2015: 25. – 26. November, Aachen 2015
-
Numerical optimization of a multi-jet cooling system for the blown film extrusionIn: Proceedings of PPS-30: the 30th International Conference of the Polymer Processing Society - conference papers / International Conference of the Polymer Processing Society, Cleveland, Ohio, USA, 6 - 12 June 2014 / Jana, Sadhan C. (Hrsg.) 2015ISBN: 9780735413092 ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/ (Open Access)
-
Spritzgießen von Bipolarplatten aus elektrisch leitfähigen, hochgefüllten Thermoplast-CompoundsIn: Spritzgießen 2015; VDI-Jahrestagung; 10.–11. Februar 2015, Kongresshaus Baden-Baden / VDI Wissensforum (Hrsg.) 2015, S. 21 - 33ISBN: 978-3-18-234336-3
-
2PC-recu-module for energy recovery at hydraulic driven injection molding machinesIn: ANTEC / Society of Plastics Engineers: conference proceedings ; annual technical conference and exhibit / 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013; Cincinnati, OH; United States; 22 April 2013 through 24 April 2013 / Society of Plastics Engineers (Hrsg.) Jg. 1 2014, S. 218 - 222ISBN: 9781632665300
-
3D-CFD-simulati0n of polymer plastification in a single screw extruder under high-speed conditionsIn: ANTEC / Society of Plastics Engineers: conference proceedings ; annual technical conference and exhibit / 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013; Cincinnati, OH; United States; 22 April 2013 through 24 April 2013 / Society of Plastics Engineers (Hrsg.) Jg. 2 2014, S. 1500 - 1506ISBN: 9781632665300
-
3D-CFD-simulation of melting processes in a high-speed-extruder with solid-melt-separationIn: Proceedings of PPS-29: Conference Papers / The 29th International Conference of the Polymer Processing Society, 15–19 July 2013, Nuremberg, Germany; Fathi, Amir / Altstädt, V.; Keller, Jan-Hendrik (Hrsg.) 2014ISBN: 978-0-7354-1227-9Online Volltext: dx.doi.org/
-
A high speed extruder with floating screw sleeve for solid-melt-separationIn: ANTEC 2014: Proceedings of the technical conference & exhibition Las Vegas, Nevada, USA April 28-30, 2014 / ANTEC 2014 : proceedings of the technical conference & exhibition Las Vegas, Nevada, USA April 28-30, 2014 2014, S. 1126 - 1129ISBN: 0-9850112-4-6; 978-0-9850112-4-6; 1-62870-941-3; 978-1-62870-941-4
-
A new possibility of melt cooling in extrusion dies to prevent sagging-effects in thick-walled pipesIn: Proceedings of PPS-29: Conference Papers / The 29th International Conference of the Polymer Processing Society, 15–19 July 2013, Nuremberg, Germany 2014, S. 133 - 136ISBN: 978-0-7354-1227-9Online Volltext: dx.doi.org/
-
A prediction model for the numerical optimization of a novel blown film cooling systemIn: 72nd annual technical conference of the Society of Plastics Engineer (ANTEC 2014): the Plastics Conference : Las Vegas, Nevada, USA, 28 - 30 April 2014 : vol. 2 2014, S. 1194 - 1199ISBN: 978-1-63439-708-7
-
CFD-based simulation of operational point influences on product changing processesIn: Proceedings of PPS-29: Conference Papers / The 29th International Conference of the Polymer Processing Society, 15–19 July 2013, Nuremberg, Germany / Altstädt, V.; Keller, Jan-Hendrik; Fathi, Amir (Hrsg.) 2014, S. 632 - 635ISBN: 978-0-7354-1227-9Online Volltext: dx.doi.org/
-
Calibrated CFD-based calculation of color and material changes in extrusion diesIn: Technical Conference and Exhibition of the Society of Plastics Engineers (ANTEC DUBAI 2014) / ANTEC Dubai ; (Dubai) : 2014.01.21-22 2014, S. 175 - 179ISBN: 978-1-63439-717-9
-
Concept development and topology optimization of joint geometries for 5-point double-toggle clamping mechanismsIn: ANTEC 2014: Proceedings of the technical conference & exhibition Las Vegas, Nevada, USA April 28-30, 2014 2014, S. 1515 - 1520ISBN: 0-9850112-4-6; 978-0-9850112-4-6; 1-62870-941-3; 978-1-62870-941-4
-
Development of a custom material model for 3D-CFD-simulation of melting processes in polymer processingIn: ANTEC 2014: Proceedings of the technical conference & exhibition Las Vegas, Nevada, USA April 28-30, 2014 / ANTEC 2014 : proceedings of the technical conference & exhibition Las Vegas, Nevada, USA April 28-30, 2014 2014, S. 1039 - 1044ISBN: 0-9850112-4-6; 978-0-9850112-4-6; 1-62870-941-3; 978-1-62870-941-4
-
Effects of laser sintering processing time and temperature on changes in polyamide 12 powder particle size, shape and distributionIn: Proceedings oF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers / The 29th International Conference of the Polymer Processing Society, 15–19 July 2013, Nuremberg, Germany / Altstädt, V.; Keller, Jan-Hendrik; Fathi, Amir (Hrsg.) 2014, S. 728 - 731ISBN: 978-0-7354-1227-9Online Volltext: dx.doi.org/
-
Inline quality prognosis of material condition induced process variationsIn: AIP Conference Proceedings / 29th International Conference of the Polymer Processing Society, PPS 2013; Nuremberg; Germany; 15 July 2013 through 19 July 2013 Jg. 1593 2014, S. 163 - 169ISBN: 9780735412279 ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/
-
Modeling of moisture effects on the rheological behavior of polymers and influences on the injection molding processIn: ANTEC 2014: Proceedings of the technical conference & exhibition Las Vegas, Nevada, USA April 28-30, 2014 / ANTEC 2014 : proceedings of the technical conference & exhibition Las Vegas, Nevada, USA April 28-30, 2014 2014, S. 1638 - 1644ISBN: 0-9850112-4-6; 978-0-9850112-4-6; 1-62870-941-3; 978-1-62870-941-4
-
Numerical and experimental investigation of a counter flow cooling system for the blown film extrusionIn: Proceedings of PPS-29: Conference Papers / The 29th International Conference of the Polymer Processing Society, 15–19 July 2013, Nuremberg, Germany / Altstädt, V.; Keller; Fathi, Amir (Hrsg.) 2014, S. 534 - 538ISBN: 978-0-7354-1227-9Online Volltext: dx.doi.org/
-
Optimization of electrical properties of bipolar plastes out of highly filled compounds : investigations on conditioning and thermal-mechanical stressIn: 71st annual technical conference of the Society of Plastics Engineers 2013: Cincinnati, Ohio, USA, 22 - 24 April 2013. - Vol. 1 / ANTEC 2013 2014, S. 426 - 430
-
Optimization of electrical properties of bipolar plates out of highly filled compounds : Investigations on conditioning and thermal-mechanical stressIn: ANTEC / Society of Plastics Engineers: conference proceedings ; annual technical conference and exhibit / 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013; Cincinnati, OH; United States; 22 April 2013 through 24 April 2013 / Society of Plastics Engineers (Hrsg.) Jg. 1 2014, S. 426 - 430ISBN: 9781632665300
-
Potential for efficiency improvements at different injection molding machinesIn: ANTEC / Society of Plastics Engineers: conference proceedings ; annual technical conference and exhibit / 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013; Cincinnati, OH; United States; 22 April 2013 through 24 April 2013 / Society of Plastics Engineers (Hrsg.) Jg. 2 2014, S. 955 - 960ISBN: 9781632665300
-
Quality improvement by enhanced pressure controlled injection moldingIn: ANTEC 2014: Proceedings of the technical conference & exhibition Las Vegas, Nevada, USA April 28-30, 2014 / ANTEC 2014 : proceedings of the technical conference & exhibition Las Vegas, Nevada, USA April 28-30, 2014 2014, S. 1694 - 1699ISBN: 0-9850112-4-6; 978-0-9850112-4-6; 1-62870-941-3; 978-1-62870-941-4
-
Rheological changes of polyamide 12 under oscillatory shearIn: Proceedings of the PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers / The 29th International Conference of the Polymer Processing Society , 15–19 July 2013, Nuremberg, Germany / Altstädt, V.; Keller, Jan-Hendrik; Fathi, Amir (Hrsg.) 2014, S. 231 - 235ISBN: 978-0-7354-1227-9Online Volltext: dx.doi.org/
-
Simulation of color and material change processes in spiral mandrel dies by a transient multiphase approachIn: ANTEC / Society of Plastics Engineers: conference proceedings ; annual technical conference and exhibit / 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013; Cincinnati, OH; United States; 22 April 2013 through 24 April 2013 / Society of Plastics Engineers (Hrsg.) Jg. 2 2014, S. 1489 - 1493ISBN: 9781632665300
-
The calibration of numerically simulated color and material change processesIn: Proceedings oF PPS-29: Conference Papers / The 29th International Conference of the Polymer Processing Society, 15–19 July 2013, Nuremberg, Germany 2014, S. 628 - 631ISBN: 978-0-7354-1227-9Online Volltext: dx.doi.org/
-
CFD based design of extrusion dies under manufacturing and process technology aspectsIn: 10th International Scientific-Technical Conference Advances in Plastics Technology (APT'13) / 10th International Conference APT '13, Sosnowiec 8-10 October 2013 2013, S. 565 - 571ISBN: 978-83-63555-23-8
-
Material data of high-performance, highly-filled thermoplastic compounds for injection molding simulation with variothermal mold temperature controlIn: Proceedings of PPS-29: Conference Papers / the 29th International Conference of the Polymer Processing Society, Nuremberg, Germany 15 - 19 July 2013 / Altstädt, Volker; Keller, Jan-Hendrik (Hrsg.) 2013ISBN: 9781632666550
-
Numerical and experimental investigation of a Contour Flow Cooling System for the Blown Film ExtrusionIn: Proceedings of PPS-29: Conference Papers / the 29th International Conference of the Polymer Processing Society, Nuremberg, Germany 15 - 19 July 2013 2013ISBN: 9781632666550
-
Prozess kalibriertes Materialmodell für die Spritzgießsimulation von hochgefüllten, elektrisch und thermisch leitfähigen ThermoplastenIn: ASIM-Treffen STS/GMMS 2013; Treffen der ASIM/GI-Fachgruppen STS und GMMS; 28. Februar - 1. März 2013, Düsseldorf; Tagungsband / Reichardt, Roland (Hrsg.) 2013, S. 161 - 170ISBN: 978-3-901608-41-4
-
Spritzgießsimulation von hochgefüllten, elektrisch und thermisch leitfähigen Thermoplast-Compounds mittels Moldex3DIn: Moldex3D Anwendertreffen 2013; 23. und 24. April 2013, RheinEnergie Stadion, Köln 2013
-
Advanced Computational Technique for the Optimization of Spiral Mandrel DiesIn: 70th annual technical conference of the Society of Plastics Engineers 2012 (ANTEC 2012) / Annual technical conference of the Society of Plastics Engineers, Orlando, Florida, USA, 2 - 4 April 2012 2012ISBN: 978-1-62276-083-1
-
Characteristic optimization of electrically conductive injection-molded parts using the example of high temperature bipolar platesIn: 70th annual technical conference of the Society of Plastics Engineers 2012 (ANTEC 2012) / Annual technical conference of the Society of Plastics Engineers, Orlando, Florida, USA, 2 - 4 April 2012 2012, S. 1394 - 1398ISBN: 978-1-62276-083-1
-
Integrated storage actuator module for continuous power consumption in periodic processesIn: 70th annual technical conference of the Society of Plastics Engineers 2012 (ANTEC 2012) / Annual technical conference of the Society of Plastics Engineers, Orlando, Florida, USA, 2 - 4 April 2012 2012, S. 1534 - 1538ISBN: 978-1-62276-083-1
-
Modellbildung zur Spritzgießsimulation hochgefüllter Thermoplaste für die Brennstoffzelle.In: 3. Fachtagung Kunststoffe in Brennstoffzellen-Systemen, 13./ 14.11.2012: Märkte, Technologien, Innovationen 2012
-
Thickness profile effects on the build-up process of film-rolls in the winding processIn: 70th annual technical conference of the Society of Plastics Engineers 2012 (ANTEC 2012) / Annual technical conference of the Society of Plastics Engineers, Orlando, Florida, USA, 2 - 4 April 2012 Jg. 2 2012, S. 1194 - 1199ISBN: 978-1-62276-083-1
-
Form filling simulation in the injection molding of highly filled thermoplasticsIn: 27th Annual Meeting of Polymer Processing Society, Marrakesh, Marokko, 10.-14.05.2011 2011
-
Natural gas as main energy source for polymer plasticizing with a spezial designed heat exchangerIn: Society of Plastics Engineers - EUROTEC 2011 Conference Proceedings / EUROTEC 2011 Conference, in Conjunction with EQUIPLAST, Barcelona, Spain, 14 November 2011 through 15 November 2011 2011
-
Optimization approaches for processing highly filled thermoplastics by injection moldingIn: 27th Annual Meeting of Polymer Processing Society, Marrakesh, Marokko, 10.-14.05.2011 2011
-
Simulation des Formfüllvorgangs beim Spritzgießen elektrisch und thermisch leitfähiger ThermoplasteIn: Tagungsband: ASIM-Konferenz STS/GMMS 2011 : Treffen der ASIM/GI-Fachgruppen: Simulation Technischer Systeme - Grundlagen und Methoden in Modellbildung und Simulation ; 24. bis 25. Februar 2011 in Krefeld1 / ASIM-Konferenz STS/GMMS, 24.-25,02.2011, Krefeld / Brenke, Andreas (Hrsg.) 2011, S. 227 - 238ISBN: 978-3-8322-9872-2
-
Increasing the efficiency of extrusion purge processes by numeric optimizationIn: Proceedings of Polymer Processing Society 25th Annual Meeting; Goa, India, 01.- 05.03.2009 2009, S. 173
-
Integrative interconnection of design, calculation and simulation for dimensioning a flow channel in polymer processingIn: The Polymer Processing Society 24th Annual Meeting (PPS-24); June 15 - 19, 2008, Salerno, Italy: Book of abstracts. 2008ISBN: 88-7897-0247
-
Automatic Simulation for the Prediction of a realistic Blown Film Contour(2012)
-
Computational Development of a Counter Flow Cooling System for the Blown Film Process(2012)
-
Simulation Of The Blown Film Extrusion Process Based On A Self-Calibrated Model(2010)
-
Processing Highly Filled Polyphenylene Sulfide on Injection Molding Machines for Standard Applications
PPS-31, 31st International Conference of the Polymer Processing Society, 7. - 11. Juni 2015, Jeju Island, Korea,(2015)