Personensuche
Personensuche
Es wurde 1 Person gefunden.
Fakultät für Ingenieurwissenschaften, Abteilung Bauwissenschaften, Institut für Mechanik
Anschrift
Universitätsstr. 2
45117 Essen
45117 Essen
Raum
R12 S02 H17
Telefon
Telefax
E-Mail
Funktionen
-
Akad. Oberrätin/-rat, Mechanik
-
Mitglied, Promotionsausschuss "Dr.-Ing."
-
Mitarbeiter Stabsstelle Wiss. Rechnen, Zentrum für Informations- und Mediendienste (ZIM)
E-Mail
Aktuelle Veranstaltungen
-
2023 SS
Vergangene Veranstaltungen (max. 10)
-
2022 WS
-
2022 SS
-
2021 WS
Die folgenden Publikationen sind in der Online-Universitätsbibliographie der Universität Duisburg-Essen verzeichnet. Weitere Informationen finden Sie gegebenenfalls auch auf den persönlichen Webseiten der Person.
-
Damage Evolution of Steel Fibre-Reinforced High-Performance Concrete in Low-Cycle Flexural Fatigue : Numerical Modeling and Experimental ValidationIn: Materials Jg. 15 (2022) Nr. 3,ISSN: 1996-1944Online Volltext: dx.doi.org/ (Open Access)
-
Effective hyperelastic material parameters from microstructures constructed using the planar Boolean modelIn: Computational Mechanics Jg. 69 (2022) Nr. 6, S. 1295 - 1321ISSN: 1432-0924; 0178-7675Online Volltext: dx.doi.org/ (Open Access)
-
Phase-field modeling of fracture in high performance concrete during low-cycle fatigue : Numerical calibration and experimental validationIn: Computer Methods in Applied Mechanics and Engineering Jg. 398 (2022)ISSN: 0045-7825; 0374-2830Online Volltext: dx.doi.org/
-
A comparative study of micro-mechanical models for fiber pullout behavior of reinforced high performance concreteIn: Engineering Fracture Mechanics Jg. 243 (2021) S. 107506ISSN: 0013-7944; 1873-7315Online Volltext: dx.doi.org/
-
Numerical characterization of residual stresses in a four-point-bending experiment of textured duplex stainless steelIn: Archive of Applied Mechanics Jg. 91 (2021) Nr. 8, S. 3541 - 3555ISSN: 1432-0681; 0939-1533Online Volltext: dx.doi.org/ (Open Access)
-
Numerische Prozessauslegung zur gezielten Eigenspannungseinstellung in warmmassivumgeformten Bauteilen unter Berücksichtigung von Makro- und MikroskalaIn: Forschung im Ingenieurwesen Jg. 85 (2021) Nr. 3, S. 757 - 771ISSN: 1434-0860; 0015-7899Online Volltext: dx.doi.org/ (Open Access)
-
Residual stresses in hot bulk formed parts : Microscopic stress analysis for austenite-to-martensite phase transformationIn: Archive of Applied Mechanics Jg. 91 (2021) Nr. 8: Forming Induced Residual Stresses - Experiment, Modelling, Simulation, S. 3603 - 3625ISSN: 1432-0681; 0939-1533Online Volltext: dx.doi.org/ (Open Access)
-
Residual stresses in hot bulk formed parts: two-scale approach for austenite-to-martensite phase transformationIn: Archive of Applied Mechanics Jg. 91 (2021) Nr. 2, S. 545 - 562ISSN: 1432-0681; 0939-1533Online Volltext: dx.doi.org/ (Open Access)
-
Micromechanical modeling of DP600 steel : From microstructure to the sheet metal forming processIn: Procedia Manufacturing Jg. 47 (2020) S. 1540 - 1547ISSN: 2351-9789Online Volltext: dx.doi.org/ (Open Access)
-
Analysis and evaluation of the pull-out behavior of hooked steel fibers embedded in high and ultra-high performance concrete for calibration of numerical modelsIn: Structural Concrete: official journal of the FIB Jg. 20 (2019) Nr. 4, S. 1254 - 1264ISSN: 1751-7648; 1464-4177Online Volltext: dx.doi.org/
-
Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505In: Metals Jg. 9 (2019) Nr. 4, S. 480ISSN: 2075-4701Online Volltext: dx.doi.org/
-
Ein Großgerät für die Forschung : Hochleistungsrechnen auf der magnitUDEIn: Unikate: Berichte aus Forschung und Lehre (2017) Nr. 50: Natur-, Ingenieur- und Wirtschaftswissenschaften - High-Performance und Cloud Computing, S. 116 - 127ISBN: 978-3-934359-50-5 ISSN: 0944-6060; 1869-3881Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Computational modeling of dual-phase steels based on representative three-dimensional microstructures obtained from EBSD dataIn: Archive of Applied Mechanics Jg. 86 (2016) Nr. 3, S. 575 - 598ISSN: 1432-0681; 0939-1533Online Volltext: dx.doi.org/
-
Modeling of Microstructure Evolution with Dynamic Recrystallization in Finite Element Simulations of Martensitic SteelIn: Steel Research International Jg. 87 (2016) Nr. 1, S. 37 - 45ISSN: 1611-3683Online Volltext: dx.doi.org/
-
Design of 3D statistically similar Representative Volume Elements based on Minkowski functionalsIn: Mechanics of Materials: Proceedings of the IUTAM Symposium on Micromechanics of Defects in Solids Jg. 90 (2015) S. 185 - 201ISSN: 0167-6636Online Volltext: dx.doi.org/
-
Study on statistically similar RVEs for real microstructures based on different statistical descriptorsIn: Proceedings in Applied Mathematics and Mechanics (PAMM) / 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics; Lecce (Italy), March 23-27, 2015 Jg. 15 (2015) Nr. 1, S. 467 - 468ISSN: 1617-7061Online Volltext: dx.doi.org/
-
Comparison of Statistical Descriptors for the Construction of Statistically Similar RVEs
85th Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik, 10 – 14 March 2014, Erlangen, Germany,In: Proceedings in Applied Mathematics and Mechanics (PAMM) Jg. 14 (2014) Nr. 1, S. 539 - 540ISSN: 1617-7061Online Volltext: dx.doi.org/ -
Construction of statistically similar representative volume elements : Comparative study regarding different statistical descriptorsIn: Procedia Engineering Jg. 81 (2014) S. 1360 - 1365ISSN: 1877-7058Online Volltext: dx.doi.org/ (Open Access)
-
Construction of two- and three-dimensional statistically similar RVEs for coupled micro-macro simulationsIn: Computational Mechanics Jg. 54 (2014) Nr. 5, S. 1269 - 1284ISSN: 1432-0924; 0178-7675Online Volltext: dx.doi.org/
-
Designing Statistically Similar RVEs for 3D Dual Phase Steel MicrostructuresIn: Proceedings in Applied Mathematics and Mechanics: PAMM / 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 18 – 22 March 2013, Novi Sad, Serbia Jg. 13 (2013) Nr. 1, S. 271 - 272ISSN: 1617-7061Online Volltext: dx.doi.org/
-
Construction of Statistically Similar RVEs for 3D MicrostructuresIn: Proceedings of Applied Mathematics and Mechanics: PAMM / 83rd Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik, 26 – 30 March 2012, Darmstadt, Germany Jg. 12 (2012) Nr. 1, S. 429 - 430ISSN: 1617-7061Online Volltext: dx.doi.org/
-
Nano to Micro - Perspectives for Homogenization in Crystalline SolidsIn: Proceedings of Applied Mathematics and Mechanics: PAMM / 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Darmstadt 2012 Jg. 12 (2012) Nr. 1, S. 19 - 22ISSN: 1617-7061Online Volltext: dx.doi.org/
-
Parallel simulation of patient‐specific atherosclerotic arteries for the enhancement of intravascular ultrasound diagnosticsIn: Engineering Computations: International Journal for Computer-aided Engineering and Software Jg. 29 (2012) Nr. 8, S. 888 - 906ISSN: 0264-4401Online Volltext: dx.doi.org/
-
Approximation of random microstructures by periodic statistically similar representative volume elements based on lineal-path functionsIn: Archive of Applied Mechanics Jg. 81 (2011) Nr. 7, S. 975 - 997ISSN: 1432-0681; 0939-1533Online Volltext: dx.doi.org/
-
On the Reconstruction and Computation of Dual-Phase Steel Microstructures Based on 3D EBSD DataIn: Proceedings in Applied Mathematics and Mechanics: PAMM / 82nd Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik, 18 – 21 April 2011, Graz, Austria Jg. 11 (2011) Nr. 1, S. 503 - 504ISSN: 1617-7061Online Volltext: dx.doi.org/
-
Simulation of Two-Phase Steels based on Statistically Similar Representative Volume ElementsIn: Proceedings in Applied Mathematics and Mechanics: PAMM / 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Graz 2011 Jg. 11 (2011) Nr. 1, S. 939 - 942ISSN: 1617-7061Online Volltext: dx.doi.org/
-
On the Construction of Statistically Similar Representative Volume Elements Based on the Lineal-Path FunctionIn: Proceedings in Applied Mathematics and Mechanics: PAMM / 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Karlsruhe 2010 Jg. 10 (2010) Nr. 1, S. 399 - 400ISSN: 1617-7061Online Volltext: dx.doi.org/
-
On the mechanical modeling of anisotropic biological soft tissue and iterative parallel solution strategiesIn: Archive of Applied Mechanics Jg. 80 (2010) Nr. 5, S. 479 - 488ISSN: 1432-0681; 0939-1533Online Volltext: dx.doi.org/
-
Sensitivity analysis of statistical measures for the reconstruction of microstructures based on the minimization of generalized least-square functionalsIn: Technische Mechanik / 3rd GAMM-Seminar on Multiscale Material Modelling June 26 - 27, 2009 at Karlsruhe, Germany Jg. 30 (2010) Nr. 4, S. 297 - 315ISSN: 0232-3869
-
FE2‐Simulations in Elasto‐Plasticity using Statistically Similar Representative Volume ElementsIn: Proceedings in Applied Mathematics and Mechanics: PAMM / 80th Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik, 9 – 13 February 2009, Gdansk, Poland Jg. 9 (2009) Nr. 1, S. 39 - 42ISSN: 1617-7061Online Volltext: dx.doi.org/
-
Numerical Simulations of Arterial Walls Based on IVUS-DataIn: Proceedings in Applied Mathematics and Mechanics: PAMM / 80th Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik, 9 – 13 February 2009, Gdansk, Poland Jg. 9 (2009) Nr. 1, S. 75 - 78ISSN: 1617-7061Online Volltext: dx.doi.org/
-
Modelling and convergence in arterial wall simulations using a parallel FETI solution strategyIn: Computer Methods in Biomechanics and Biomedical Engineering Jg. 11 (2008) Nr. 5, S. 569 - 583ISSN: 1476-8259; 1025-5842Online Volltext: dx.doi.org/
-
On the visualization of patient specific arterial geometries using the virtual histologyIn: Proceedings in Applied Mathematics and Mechanics: PAMM / 79th Annual Meeting of the Gesellschaft für Angewandte Mathematik und Mechanik, 31 March - 4 April 2008, Bremen, Germany Jg. 8 (2008) Nr. 1, S. 10169 - 10170ISSN: 1617-7061Online Volltext: dx.doi.org/
-
Large-scale simulation of arterial walls : mechanical modelingIn: Proceedings in Applied Mathematics and Mechanics: PAMM / Sixth International Congress on Industrial Applied Mathematics (ICIAM07) and GAMM Annual Meeting, 16-20 Juli 2007, Zürich Jg. 7 (2007) Nr. 1, S. 4020017 - 4020018ISSN: 1617-7061Online Volltext: dx.doi.org/
-
Phase-field modeling for damage in high performance concrete at low cycle fatigueIn: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation, 2022 / 8th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022): Cape Town, South Africa; 5 - 7 September 2022 / Zingoni, Alphose (Hrsg.) 2023, S. 1297 - 1299ISBN: 9781003348443Online Volltext: dx.doi.org/
-
A multiscale approach to investigate residual stresses due to targeted cooling of hot bulk formed partsIn: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation, 2022 / 8th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022): Cape Town, South Africa; 5 - 7 September 2022 / Zingoni, Alphose (Hrsg.) 2022, S. 262 - 268ISBN: 9781003348443Online Volltext: dx.doi.org/
-
Damage development of steel fibre reinforced high performance concrete in high cycle fatigue testsIn: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation, 2022 / 8th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022): Cape Town, South Africa; 5 - 7 September 2022 / Zingoni, Alphose (Hrsg.) 2022, S. 1327 - 1332ISBN: 9781003348443Online Volltext: dx.doi.org/
-
Macroscopic model based on application of representative volume element for steel fiber reinforced high performance concreteIn: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems: Proceedings of the 8th International Conference on Structural Engineering, Mechanics and Computation, 2022 / 8th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022): Cape Town, South Africa; 5 - 7 September 2022 / Zingoni, Alphose (Hrsg.) 2022, S. 1300 - 1306ISBN: 9781003348443Online Volltext: dx.doi.org/
-
Experimental and Numerical Investigations on the Development and Stability of Residual Stresses Arising from Hot Forming ProcessesIn: Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity / ICTP 2021; Virtual, Online, 25 July 2021 - 30 July 2021 / Daehn, Glenn; Cao, Jian; Kinsey, Brad; Tekkaya, Erman; Vivek, Anupam; Yoshida, Yoshinori (Hrsg.) 2021, S. 2289 - 2301ISBN: 978-3-030-75380-1; 978-3-030-75381-8Online Volltext: dx.doi.org/
-
Residual Stresses in Hot Bulk Formed Parts : A Phenomenological Approach for the Austenite-to-Martensite Phase TransformationIn: Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity / ICTP 2021; Virtual, Online, 25 July 2021 - 30 July 2021 / Daehn, Glenn; Cao, Jian; Kinsey, Brad; Tekkaya, Erman; Vivek, Anupam; Yoshida, Yoshinori (Hrsg.) 2021, S. 2345 - 2355ISBN: 978-3-030-75380-1; 978-3-030-75381-8Online Volltext: dx.doi.org/
-
EXASTEEL : Towards a virtual laboratory for the multiscale simulation of dual-phase steel using high-performance computingIn: Software for Exascale Computing: SPPEXA 2016-2019 / Bungartz, Hans-Joachim; Reiz, Severin; Uekermann, Benjamin; Neumann, Philipp; Nagel, Wolfgang E. (Hrsg.) 2020, S. 351 - 404ISBN: 978-3-030-47956-5; 978-3-030-47955-8; 978-3-030-47957-2; 978-3-030-47958-9Online Volltext: dx.doi.org/ (Open Access)
-
Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modellingIn: Proceedings of the fib Symposium 2019: Concrete - Innovations in Materials, Design and Structures / fib Symposium 2019; Krakow; Poland; 27 - 29 May 2019 2019, S. 889 - 896ISBN: 9782940643004
-
Deterioration development of steel fibre reinforced high performance concrete in low-cycle fatigueIn: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications / 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), September 2-4, 2019, Cape Town, South Africa 2019, S. 1444 - 1449ISBN: 9781138386969Online Volltext: dx.doi.org/
-
Numerical calibration of elasto-plastic phase-field modeling of fracture for experimental pullout tests of single steel fibers embedded in high-performance concreteIn: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications / 7th International Conference on Structural Engineering, Mechanics, and Computation (SEMC 2019), 02.-04.09.2019, Cape Town, South Africa / Zingoni, Alphose (Hrsg.) 2019, S. 1391 - 1396ISBN: 9781138386969Online Volltext: dx.doi.org/
-
Macroscopic characterization of porous unit cells within the framework of the theory of porous mediaIn: Insights and Innovations in Structural Engineering, Mechanics and Computation: Proceedings of the Sixth International Conference on Structural Engineering, Mechanics and Computation / Zingoni, Alphose; SEMC 2016; Cape Town; South Africa; 5 - 7 September 2016 2016, S. 400 - 405ISBN: 9781138029279
-
Macroscopic yield curves based on statistically similar RVEs for 3D dual-phase steel microstructuresIn: Insights and Innovations in Structural Engineering, Mechanics and Computation: Proceedings of the 6th International Conference on Structural Engineering, Mechanics and Computation / Zingoni, Alphose; SEMC 2016; Cape Town; South Africa; 5 - 7 September 2016 2016, S. 433 - 438ISBN: 9781138029279
-
A Comparison of Different Statistical Measures for the Construction of Statistically Similar RVEs for dual phase steel microstructuresIn: Plastic behavior of conventional and advanced materials: theory, experiment, and modeling: proceedings of Plasticity'15 / Plasticity'15, 21st International Symposium on Plasticity and its Current Applications, 4-9 Januar 2015, Montego Bay, Jamaika / Khan, Akhtar S. (Hrsg.) 2015ISBN: 978-0-9911654-8-3
-
Construction of Statistically Similar RVEsIn: Analysis and Computation of Microstructure in Finite Plasticity / Conti, Sergio; Hackl, Klaus (Hrsg.) 2015, S. 219 - 256ISBN: 978-3-319-18241-4; 978-3-319-18242-1Online Volltext: dx.doi.org/
-
Comparative study for the efficient construction of statistically similar RVEs : Lineal-path and minkowski functionalsIn: Proceedings of the jointly organised 11th World Congress on Computational Mechanics (WCCM XI) / Oñate, Eugenio; 11th World Congress of Computational Mechanics (WCCM XI), 20-25 July 2014, Barcelona, Spain 2014, S. 3393 - 3402ISBN: 978-84-942844-7-2
-
Construction of statistically similar representative volume elementsIn: Plasticity and Beyond / Schröder, Jörg; Hackl, Klaus (Hrsg.) 2014, S. 355 - 412ISBN: 978-3-7091-1624-1; 978-3-7091-1625-8Online Volltext: dx.doi.org/
-
Simulation of arterial walls under condsideration of residual stresses : A numerical approachIn: Proceedings of the jointly organised 11th World Congress on Computational Mechanics (WCCM XI) / 11th World Congress of Computational Mechanics (WCCM XI), 20-25 July 2014, Barcelona, Spain / Oñate, Eugenio (Hrsg.) 2014, S. 971 - 981ISBN: 978-84-942844-7-2
-
Construction of 3D statistically similar RVEs for dual-phase steel microstructuresIn: Computational Plasticity XII: Fundamentals and Applications - Proceedings of the 12th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2013 / XII International Conference on Computational Plasticity - Fundamentals and Applications, Barcelona, Spain, 3 - 5 September 2013 / Onate, E. (Hrsg.) 2013, S. 1415 - 1426ISBN: 978-84-941531-5-0
-
Simulation of dual phase steels based on three-dimensional statistically similar RVEsIn: Analytical, Computational, and experimental inelasticity in deformable solids / Plasticity '13 - 19th International Symposium on Plasticity & its Current Applications, 3-8 January 2013, Nassau, Bahamas / Khan, Akhtar S. (Hrsg.) 2013ISBN: 0-9659463-4-2
-
Simulation of dual phase steels based on three-dimensionalsional statistically similar RVEsIn: Proceedings of the 19th International Symposium on Plasticity and its Current Applications “Analytical, Computational, and Experimental Inelasticity in Deformable Solids” / 19th International Symposium on Plasticity and its Current Applications “Analytical, Computational, and Experimental Inelasticity in Deformable Solids”, 03.-08.01.2013, Nassau, Bahamas 2013
-
Statistically similar RVE construction based on 3D dual-phase steel microstructuresIn: Research and Applications in Structural Engineering, Mechanics and Computation: Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation / SEMC 2013; Cape Town; South Africa; 2 - 4 September 2013 / Zingoni, Alphose (Hrsg.) 2013, S. 411 - 416ISBN: 978-1-315-85078-8; 978-1-138-00061-2
-
Construction of Statistically Similar Representative Volume Elements for Dual Phase SteelsIn: Proceedings of the 18th International Symposium on Plasticity and its Current Applications, San Juan, Puerto Rico 2012
-
On the incorporation of microstructural information of two-phase steels in FE-Simulations of sheet metal formingIn: Advanced failure predicition methods in sheet metal forming: Proceedings / 5th Forming Technology Forum 2012 ; June 5th - 6th, 2012, Zurich, Switzerland 2012, S. 11 - 16ISBN: 978-3-906031-06-4
-
On the Incorporation of Microstructural Information in Dual Phase Steel SimulationsIn: Proceedings of the 10th International Conference on Technology of Plasticity / ICTP 2011: September 25 - 30, 2011, Aachen, Germany 2011, S. 823 - 826ISBN: 9783514007840
-
Simulation of DP-steels based on statistically similar Representative volume elements and 3D EBSD DataIn: Computational Plasticity XI - Fundamentals and Applications / 11th International Conference on Computational Plasticity, COMPLAS XI, Barcelona, Spain, 07 - 09 September 2011 / Onate, E. (Hrsg.) 2011, S. 1552 - 1563ISBN: 978-84-89925-73-1
-
Statistically Similar RVEs for the Simulation of Two-Phase Steels based on Lineal-Path FunctionsIn: Proceedings of the 2nd African Conference on Computational Mechanics: AfriCOMP11; Cape Town; South Africa; 5 - 8 January 2011 2011
-
Statistically Similar Reconstruction of Dual-Phase Steel Microstructures for Engineering ApplicationsIn: Proceedings of the 19th International Conference on Computer Methods in Mechanics / CMM-2011: 9 - 12 May 2011, Warsaw, Poland 2011
-
A FE2-Homogenization Technique for Two-Phase Steels based on Statistically Similar Representative Volume ElementsIn: Finite plasticity and visco-plasticity of conventional and emerging materials: Proceedings of PLASTICITY '10 / 16th International Symposium on Plasticity & its Current Applications, 3-8 January 2010, St. Kitts / Khan, Akhtar S. (Hrsg.) 2010ISBN: 0-9659463-2-0
-
FE2-simulation of micro-heterogeneous steels based on statistically similar RVE'sIn: IUTAM Symposium on Variational Concepts with Applications to the Mechanics of Materials: Proceedings / IUTAM Symposium on Variational Concepts with Applications to the Mechanics of Materials, 22-26 September 2008, Bochum, Germany / Hackl, Klaus (Hrsg.) 2010, S. 15 - 28ISBN: 978-90-481-9194-9; 978-90-481-9195-6Online Volltext: dx.doi.org/
-
Aspects of modeling and large scale simulation of arterial wallsIn: Proceedings of the Fifteenth UK Conference of the Association of Computational Mechanics in Engineering / Fifteenth UK Conference of the Association of Computational Mechanics in Engineering, 2-3 April 2007, Glasgow, United Kingdom / Topping, B. H. V. (Hrsg.) 2007, S. 8ISBN: 978-1-905088-14-0Online Volltext: dx.doi.org/
-
Computer simulation of damage in overstretched atherosclerotic arteriesIn: WCECS 2007 Proceedings / International Conference on Computational Biology (ICCB 2007), 24-26 October 2007, San Francisco, USA 2007, S. 209 - 214ISBN: 978-988-98671-6-4
-
Modeling and computational aspects of arterial wallsIn: Computational plasticity: fundamentals and applications ; COMPLAS IX / 9th International Conference on Computational Plasticity - Fundamentals and Applications - COMPLAS 2007, 5 - 7 September 2007, Barcelona, Spain / Oñate, Eugenio (Hrsg.) 2007ISBN: 978-84-96736-27-6
-
On mechanical modeling of arterial walls and parallel solution strategiesIn: Proceedings of the 2nd GAMM Seminar on Continuum Biomechanics / 2nd GAMM seminar on continuum biomechanics, 22.-24. November 2006, Freudenstadt-Lauterbad, Germany / Ehlers, W. (Hrsg.) 2007, S. 97 - 107ISBN: 978-3-937399-16-X
-
Simulation of arterial walls : an algebraic interface to iterative substructuringIn: WCECS 2007 Proceedings / International Conference on Computational Biology (ICCB 2007), 24-26 October 2007, San Francisco, USA 2007, S. 51 - 56ISBN: 978-988-98671-6-4
-
Simulation of arterial walls using FETI domain decomposition methodsIn: MHM 2007 - Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering: Proceedings / ECCOMAS thematic conference "Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering", 25 - 27 June 2007, Prague, Czech Republic / Jirásek, Milan; Bittnar, Zdeněk; Mang, Herbert (Hrsg.) 2007, S. 104 - 105ISBN: 9788001037621
-
Proceedings of the Third Seminar on The Mechanics of Multifunctional Materials
Third Seminar on The Mechanics of Multifunctional Materials, Physikzentrum Bad Honnef, June 11 - 15, 2018,Duisburg, Essen (2018) 134 Seiten
(Institute of Mechanics Department of Civil Engineering Faculty of Engineering University of Duisburg-Essen, Report ; 18)ISBN: 978-3-9818074-4-8; 3-9818074-4-8Online Volltext: dx.doi.org/ Online Volltext (Open Access) -
Geometrical modeling and numerical simulation of heterogeneous materials : applications to arterial walls and two-phase steelsDuisburg, Essen (2012) VIII, 158 S.
(Bericht / Institut für Mechanik, FB für Bauwissenschaften der Universität Duisburg-Essen ; 10)Online Volltext (Open Access) -
Efficient FE2-Simulations using Statistically Similar RVEs
Plasticity 2011: 17th International Symposium on Plasticity and its Current Applications, 3.1.-8.1.2011, Puerto Vallarta, Mexico,Puerto Vallarta (2011) -
Construction of statistically similar representative volume elements for fe2-simulations based on the lineal-path function
4th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), ECCOMAS ECCM 2010, 17 - 21 May 2010, Paris, France,Paris (2010) -
Modeling of two-phase steels based on statistically similar microstructures
18th International Conference on Computer Methods in Mechanics, CMM 2009, 18-21 May 2009, Zielona Góra, Poland,(2009)