Personensuche

Personensuche

Bitte geben Sie den Namen der gesuchten Person ein.

Es wurde 1 Person gefunden.

Dr.-Ing. Christian Overhagen

Anschrift
Friedrich-Ebert-Str. 12
47119 Duisburg
Raum
ST 096
Telefon
+49 203 379 3627
Telefax
+49 203 379 3464
E-Mail
christian.overhagen@uni-due.de
Webseite
https://www.uni-due.de/umf/overhagen.php
Sprechzeiten
nur nach Vereinbarung

Funktionen

  • Wissenschaftliche/r Mitarbeiter/in, Umformtechnik

Die folgenden Publikationen sind in der Online-Universitätsbibliographie der Universität Duisburg-Essen verzeichnet. Weitere Informationen finden Sie gegebenenfalls auch auf den persönlichen Webseiten der Person.

    Artikel in Zeitschriften

  • Tseng, ShaoChen; Ali Khan, Muhammad; Qayyum, Faisal; Guk, Sergey; Overhagen, Christian; Chao, ChingKong; Prahl, Ulrich
    Improved method for generation of hot working process maps of metals
    In: Journal of the Chinese Institute of Engineers Jg. 46 (2023) Nr. 6, S. 580 - 590
    Online Volltext: dx.doi.org/
  • Overhagen, Christian
    Numerical assessment of interstand tensions in continuous hot rolling processes of flat and long products
    In: The International Journal of Advanced Manufacturing Technology Jg. 127 (2023) Nr. 9-10, S. 4677 - 4696
    Online Volltext: dx.doi.org/ (Open Access)
  • Ali, Muhammad; Qayyum, Faisal; Tseng, ShaoChen; Guk, Sergey; Overhagen, Christian; Chao, ChingKong; Prahl, Ulrich
    Development of Hot Working Process Maps for Incompressible TRIP Steel and Zirconia Composites Using Crystal Plasticity-Based Numerical Simulations
    In: Metals Jg. 12 (2022) Nr. 12, 2174
    Online Volltext: dx.doi.org/ (Open Access)
  • Overhagen, Christian; Braun, Rolf; Deike, Rüdiger
    Analysis of elastic rolling stand deformation and interstand tension effects on section faults of hot rolled wire rod and bars
    In: Technisches Messen: tm Jg. 87 (2020) Nr. 5, S. 343 - 348
    Online Volltext: dx.doi.org/
  • Overhagen, Christian; Mauk, Paul Josef
    A Model for Strip Profile and Roll Crown During Flat Rolling in Hot and Cold Mills with Special Emphasis on Innovative Work Roll Materials
    In: Iron & Steel Technology Jg. 11 (2015)
  • Overhagen, Christian; Mauk, Paul Josef
    Keramische Walzenwerkstoffe und Werkzeuge für das Warm- und Kaltwalzen : Ceramic materials for rolls and rolling tools in hot and cold rolling
    In: Stahl und Eisen Jg. 134 (2014) Nr. 5, S. 53 - 60
  • Overhagen, Christian; Mauk, Paul Josef
    Cold rolling of metal foils by means of ceramic work rolls
    In: Iron and Steel Technology Jg. 10 (2013) Nr. 2, S. 97 - 104
  • Mauk, Paul Josef; Overhagen, Christian; Stellmacher, Ulrike
    Die Entwicklung der Umformtechnik im Bereich der Langprodukte
    In: Stahl und Eisen: Zeitschrift für die Herstellung und Verarbeitung von Eisen und Stahl Jg. 130 (2010) Nr. 69, S. 24
  • Overhagen, Christian; Mauk, Paul Josef
    Auswirkungen der Mehradrigkeit beim Walzen von Draht auf die Toleranz der Fertigquerschnitte
    In: Der Kalibreur : Organ d. Arbeitsgemeinschaft Europäischer Kalibreure Jg. 70 (2009) S. 69 - 82

    • Beiträge in Sammelwerken und Tagungsbänden

  • Overhagen, Christian; Braun, Rolf
    Methods for Model-Aided In-Line Measurement and Control of Cross-Sections in Wire Rod and Bar Mills
    In: AISTech - Iron and Steel Technology Conference Proceedings / AISTech 2023 Iron & Steel Technology Conference, 8-11 May 2023, Detroit, Michigan, USA / Vergot, J. M.; Williams, E. C. (Hrsg.) 2023, S. 1735 - 1747
    Online Volltext: dx.doi.org/
  • Braun, Rolf; Ananta, Ilham Zuhdi; Buono, Gilar Bagaskoro; Overhagen, Christian; Uddin, Mayeen
    A Model for Roll-Drawing of Full Sections with Experimental Verification
    In: Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25th International Conference on Material Forming (ESAFORM 2022) / 25th International Conference on Material Forming (ESAFORM 2022), April 27-29, 2022, Portugal / Vincze, Gabriela; Barlat, Frédéric (Hrsg.) 2022, S. 481 - 498
    Online Volltext: dx.doi.org/
  • Overhagen, Christian; Fu, Kaiqi
    Data-Driven Roll Pass Design of Wire Rod Mills
    In: Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25th International Conference on Material Forming (ESAFORM 2022) / 25th International Conference on Material Forming (ESAFORM 2022), April 27-29, 2022, Portugal / Vincze, Gabriela; Barlat, Frédéric (Hrsg.) 2022, S. 589 - 601
    Online Volltext: dx.doi.org/
  • Overhagen, Christian
    A Fast Computational Model for the Local Stress Distribution and Mechanical and Thermal Work Roll Deformations with Effects on Strip Profile and Flatness During Hot Rolling of Strip in Four-High Mills
    In: Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity / ICTP 2021; Virtual, Online, 25 July 2021 - 30 July 2021 / Daehn, Glenn; Cao, Jian; Kinsey, Brad; Tekkaya, Erman; Vivek, Anupam; Yoshida, Yoshinori (Hrsg.) 2021, S. 2483 - 2496
    Online Volltext: dx.doi.org/
  • Overhagen, Christian
    A computational method for pass design of the four-roll rolling process for sizing of round sections
    In: 24th International Conference on Material Forming / ESAFORM 2021; Virtual, Online; 14 - 16 April 2021 2021 3987
    Online Volltext: dx.doi.org/ (Open Access)
  • Overhagen, Christian; Braun, Rolf; Deike, Rüdiger
    Methods for online measurement and control of section deviations during hot rolling of wire rod and bars
    In: 24th International Conference on Material Forming / ESAFORM 2021; Virtual, Online; 14 - 16 April 2021 2021 4195
    Online Volltext: dx.doi.org/ (Open Access)
  • Overhagen, Christian; Mauk, Paul Josef
    A model for prediction of profile and flatness of hot and cold rolled flat products in four-high mills
    In: Proceedings of the 21st International ESAFORM Conference on Material Forming / ESAFORM 2018, Palermo, Italy, 23 April 2018 through 25 April 2018 2018, S. 040015
    Online Volltext: dx.doi.org/
  • Overhagen, Christian; Mauk, Paul Josef
    A refined model for strip profile evolution during hot and cold strip rolling in 4-high rolling mills
    In: AISTech 2017: Proceedings of the Iron & Steel Technology Conference / AISTech 2017, 8-11 May 2017, Nashville, Tenn., U.S.A. / Ashburn, Ronald E. (Hrsg.) 2017, S. 2281 - 2294
  • Overhagen, Christian; Mauk, Paul Josef
    A fast three-dimensional model for strip rolling
    In: Metal forming 2016 / Metal Forming International Conference, September 18-21, 2016, Kraków, Poland / Szeliga, Danuta; Muszka, Krzysztof (Hrsg.) 2016, S. 566 - 578
    Online Volltext: dx.doi.org/
  • Overhagen, Christian; Mauk, Paul Josef
    Possibilities and limitations of free size rolling with respect to size and temperature variations of different materials
    In: Proceedings of the Iron & Steel Technology Conference / Iron & Steel Technology Conference, 4 - 7 May 2015, Cleveland, Ohio, U.S.A. 2015, S. 3061 - 3071
  • Overhagen, Christian; Mauk, Paul Josef
    A new rolling model for three-roll rolling mills
    In: Metal Forming 2014 / 15th International Conference on Metal Forming 2014, September 21-24, 2014, Palermo, Italy / Micari, Fabrizio; Fratini, Livan (Hrsg.) 2014, S. 879
    Online Volltext: dx.doi.org/
  • Overhagen, Christian; Mauk, Paul Josef
    A rolling model for the three-roll rolling process
    In: Proceedings of the Iron & Steel Technology Conference / Iron & Steel Technology Conference : 6 - 9 May 2013, Pittsburgh, Pennsylvania, U.S.A. 2013, S. 1899 - 1911
  • Overhagen, Christian; Braun, Rolf; Mauk, Paul Josef; Lan, Yun; Giersbach, Jörg
    Cold rolling of high-strength stainless steel foils with ceramic SiN work rolls
    In: Metal forming 2012: proceedings of the 14th International Conference on Metal Forming / 14th International Conference on Metal Forming, September 16 - 19, 2012, Krakow, Poland / Kusiak, Jan (Hrsg.) 2012, S. 67 - 70
  • Overhagen, Christian; Mauk, Paul Josef
    Cold rolling of metal foils by means of ceramic work rolls
    In: Proceedings of the Iron & Steel Technology Conference / Iron & Steel Technology Conference, 7 - 10 May 2012, Atlanta, Georgia, U.S.A. 2012, S. 2159 - 2167
  • Overhagen, Christian; Mauk, Paul Josef
    Flexible Groove Sequences for Hot Rolling a Number of Materials
    In: Proceedings of the Iron & Steel Technology Conference / AISTech 2012, 7-10 May 2012, Atlanta, Ga., USA / Ashburn, Ronald E (Hrsg.) 2012, S. 2065 - 2075
  • Mauk, Paul Josef; Overhagen, Christian
    Current state of the art and developments for hot and cold rolling of flat and long products
    In: Proceedings of the 10th International Conference on Steel Rolling / International Conference on Steel Rolling, September 15 - 17, 2010, Beijing, China 2010
  • Mauk, Paul Josef; Overhagen, Christian
    Die moderne Elementare Plastizitätstheorie zur Lösung technologischer Aufgabenstellungen beim Warm- und Kaltwalzen
    In: Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik / Steinhoff, Kurt (Hrsg.) 2008, S. 35 - 52

    • Dissertation

  • Overhagen, Christian;
    Modelle zum Walzen von Flach- und Vollquerschnitten
    Duisburg, Essen (2018) XXVI, 329 Seiten
    Online Volltext (Open Access)