Personensuche

Personensuche

Bitte geben Sie den Namen der gesuchten Person ein.

Es wurde 1 Person gefunden.

Prof. Dr.-Ing. Stefanie Hanke

Fakultät für Ingenieurwissenschaften

Anschrift
Lotharstr. 1
47057 Duisburg
Raum
MB 161A
Telefon
+49 203 379 4372
E-Mail
stefanie.hanke@uni-due.de
Webseite
http://www.uni-due.de/wt

Funktionen

  • Prodekan/in (Forschung und wiss. Nachwuchs), Ingenieurwissenschaften

  • Prodekan/in (Forschung und wiss. Nachwuchs), Fakultätsrat

  • Universitätsprofessor/in, Werkstofftechnik

Die folgenden Publikationen sind in der Online-Universitätsbibliographie der Universität Duisburg-Essen verzeichnet. Weitere Informationen finden Sie gegebenenfalls auch auf den persönlichen Webseiten der Person.

    Artikel in Zeitschriften

  • Zhu, Shuai; Abedini, Morteza; Hanke, Stefanie; Sieberg, Philipp
    Introducing tribo-data map as a novel analysis for a detailed correlation between friction data and wear surface features
    In: Wear, Jg. 571, 2025, 205850
    DOI (Open Access)
  • Abedini, Morteza; Hanke, Stefanie
    Microstructural and tribological properties of multilayered coatings developed through heat treatment on the surface of CP-Ti
    In: Surface and Coatings Technology, Jg. 495, 2025, 131590
    DOI (Open Access)
  • Abedini, Morteza; Hanke, Stefanie
    On the reasons for reduced cavitation erosion of alloys in water containing SDS and NaCl
    In: Wear, Jg. 571, 2025, 205792
    DOI (Open Access)
  • Abedini, Morteza; Lopez de Arcaute y Lozano, Christina; Kostka, Aleksander; Hanke, Stefanie
    Influence of surface finishing by grinding on the cavitation erosion resistance of 316L and NiAl-bronze
    In: Wear, Jg. 554-555, 2024, 205432
    DOI (Open Access)
  • Ngeru, Timothy; Kurtulan, Dzhem; Hanke, Stefanie
    Mechanical Behavior and Life Prediction of a Low Nickel/High Nitrogen Austenitic Steel under Pure Torsion, Uniaxial Tension-Compression, and Multiaxial Fatigue
    In: Materials Performance and Characterization, Jg. 13, 2024, Nr. 1, 20230065
    DOI
  • Kimm, Janis; Hanke, Stefanie; Weber, Sebastian; Lentz, Jonathan
    Processing of High Interstitial Austenitic Steel with Powder Bed Fusion-Laser Beam/Metal : Evolution of Chemical Inhomogeneity and Microstructural Features during Postprocessing
    In: Advanced Engineering Materials, Jg. 26, 2024, Nr. 8, 2301902
    DOI (Open Access)
  • Sieberg, Philipp; Hanke, Stefanie
    Challenges and potentials in the classification of wear mechanisms by artificial intelligence
    Konferenz 24th International Conference on Wear of Materials, 16.–20.04.2023, Banff, Alberta, Canada,
    In: Wear, Jg. 522, 2023, 204725
    DOI
  • Kühlmann, Jonas; Lopez de Arcaute y Lozano, Christina; Hanke, Stefanie; Kaiser, Sebastian A.
    Correlation of laser-induced single bubbles with cavitation damage via in-situ imaging
    24th International Conference on Wear of Materials ; 16–20 April 2023, Banff, Alberta, Canada,
    In: Wear, Jg. 522, 2023, 204723
    DOI
  • Roos, Arne; Metternich, Franziska; Kallien, Zina; Baumann, Jonas; Ehrich, Jonas; Kipp, Monika; Hanke, Stefanie; Biermann, Dirk; Klusemann, Benjamin
    Friction surfacing of aluminum to steel: influence of different substrate surface topographies
    In: Materials & Design, Jg. 235, 2023, 112390
    DOI (Open Access)
  • Abedini, Morteza; Hanke, Stefanie
    Improving the wear resistance of aluminum by a nickel-filled anodized porous alumina layer
    24th International Conference on Wear of Materials ; 16–20 April 2023, Banff, Alberta, Canada,
    In: Wear, Jg. 522, 2023, 204858
    DOI
  • Abedini, Morteza; Hanke, Stefanie; Reuter, Fabian
    In situ measurement of cavitation damage from single bubble collapse using high-speed chronoamperometry
    In: Ultrasonics Sonochemistry, Jg. 92, 2023, 106272
    DOI (Open Access)
  • Biswas, Abhishek; Kurtulan, Dzhem; Ngeru, Timothy; Azócar Guzmán, Abril; Hanke, Stefanie; Hartmaier, Alexander
    Mechanical Behavior of Austenitic Steel under Multi-Axial Cyclic Loading
    In: Materials, Jg. 16, 2023, Nr. 4, 1367
    DOI (Open Access)
  • Lopez de Arcaute y Lozano, C.; Kühlmann, Jonas; Kaiser, Sebastian; Hanke, Stefanie
    Observing early cavitation damage evolution from repeated laser-induced single bubbles on aluminium, austenitic steel and nickel-aluminium bronze
    24th International Conference on Wear of Materials ; 16–20 April 2023, Banff, Alberta, Canada,
    In: Wear, Jg. 523, 2023, 204862
    DOI
  • Schütte, Malte R.; Ehrich, Jonas; Linsler, Dominic; Hanke, Stefanie
    Effects of Microstructure Modification by Friction Surfacing on Wear Behavior of Al Alloys with Different Si Contents
    In: Materials, Jg. 15, 2022, Nr. 5, 1641
    DOI (Open Access)
  • Kühlmann, Jonas; Lopez de Arcaute y Lozano, Christina; Hanke, Stefanie; Kaiser, Sebastian
    In-situ Investigation of the Onset of Cavitation Damage from Single Bubbles on Technical Alloys
    In: Tribology Letters, Jg. 70, 2022, Nr. 4, 122
    DOI (Open Access)
  • Ngeru, Timothy; Kurtulan, Dzhem; Karkar, Ahmet; Hanke, Stefanie
    Mechanical Behaviour and Failure Mode of High Interstitially Alloyed Austenite under Combined Compression and Cyclic Torsion
    In: Metals, Jg. 12, 2022, Nr. 1, 157
    DOI, Online Volltext (Open Access)
  • Ehrich, Jonas; Staron, Peter; Karkar, Ahmet; Roos, Arne; Hanke, Stefanie
    Precipitation evolution in the heat‐affected zone and coating material of AA2024 processed by Friction Surfacing
    In: Advanced Engineering Materials, Jg. 24, 2022, Nr. 11, 2201019
    DOI (Open Access)
  • Sieberg, Philipp Maximilian; Kurtulan, Dzhem; Hanke, Stefanie
    Wear Mechanism Classification Using Artificial Intelligence
    In: Materials, Jg. 15, 2022, Nr. 7, 2358
    DOI, Online Volltext (Open Access)
  • Schreiner, Felix; Hanke, Stefanie; Skoda, Romuald
    Assessment of flow aggressiveness and erosion damage topography for different gap widths in ultrasonic cavitation testing
    In: Wear, Jg. 484-485, 2021, 203989
    DOI
  • Hanke, Stefanie; Kaiser, Sebastian
    Comparison of damage mechanisms : Acoustic cavitation versus series of single laser-induced bubbles
    In: Wear, Jg. 476, 2021, 203641
    DOI
  • Paolantonio, Mario; Hanke, Stefanie
    Damage mechanisms in cavitation erosion of nitrogen-containing austenitic steels in 3.5% NaCl solution
    In: Wear, Jg. 464-465, 2021, 203526
    DOI
  • Ehrich, Jonas; Roos, Arne; Klusemann, Benjamin; Hanke, Stefanie
    Influence of Mg content in Al alloys on processing characteristics and dynamically recrystallized microstructure of friction surfacing deposits
    In: Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, Jg. 819, 2021, 141407
    DOI
  • Mitevski, Bojan; Kurtulan, Dzhem; Hanke, Stefanie
    The influence of submechanisms of abrasion on the wear of steels under lubricated sliding
    In: Wear, Jg. 477, 2021, 203836
    DOI
  • Alba, Diego Rafael; Roos, Arne; Wimmer, Georg; Gonzalez, Arnaldo Ruben; Hanke, Stefanie; dos Santos, Jorge Fernandez
    Application of response surface methodology foroptimization of hybrid friction diffusion bonding oftube-to-tube-sheet connections in coil-wound heatexchangers
    In: Journal of Materials Research and Technology, Jg. 8, 2019, Nr. 2, S. 1701 – 1711
    DOI (Open Access)
  • Abedini, Morteza; Reuter, Fabian; Hanke, Stefanie
    Corrosion and material alterations of a CuZn38Pb3 brass under acoustic cavitation
    In: Ultrasonics Sonochemistry, Jg. 58, 2019, 104628
    DOI
  • Sajjad, Hafiz Muhammad; Hanke, Stefanie; Güler, Sedat; ul Hassan, Hamad; Fischer, Alfons; Hartmaier, Alexander
    Modelling Cyclic Behaviour of Martensitic Steel with J2 Plasticity and Crystal Plasticity
    In: Materials, Jg. 12, 2019, Nr. 11, S. 1767
    DOI (Open Access)
  • Hanke, Stefanie; Staron, P.; Fischer, T.; Fitseva, V.; dos Santos, J.F.
    A method for the in-situ study of solid-state joining techniques using synchrotron radiation - observation of phase transformations in Ti-6Al-4V after friction surfacing
    In: Surface and Coatings Technology, Jg. 335, 2018, S. 355 – 367
    DOI (Open Access)
  • Sagar, Hemant J.; Hanke, Stefanie; Underberg, Martin; Feng, Chaojie; el Moctar, Bettar Ould; Kaiser, Sebastian
    Experimental and numerical investigation of damage on an aluminum surface by single-bubble cavitation
    In: Materials Performance and Characterization, Jg. 7, 2018, Nr. 5, S. 985 – 1003
    DOI
  • Dovzhenko, Gleb; Hanke, Stefanie; Staron, Peter; Maawad, Emad; Schreyer, Andreas; Horstmann, Manfred
    Residual stresses and fatigue crack growth in friction surfacing coated Ti-6Al-4V sheets
    In: Journal of Materials Processing Technology, Jg. 262, 2018, S. 104 – 110
    DOI
  • Hanke, Stefanie; dos Santos, J.F.
    Comparative study of severe plastic deformation at elevated temperatures of two aluminium alloys during friction surfacing
    In: Journal of Materials Processing Technology, Jg. 247, 2017, S. 257 – 267
    DOI
  • Hanke, Stefanie; Lemos, G.V.B.; Bergmann, L.; Martinazzi, D.; dos Santos, J.F.; Strohaecker, T.R.
    Degradation mechanisms of pcBN tool material during Friction Stir Welding of Ni-base alloy 625
    In: Wear, Jg. 376-377, 2017, S. 403 – 408
    DOI
  • Fitseva, V.; Hanke, Stefanie; dos Santos, J.F.
    Influence of rotational speed on process characteristics in friction surfacing of Ti-6Al-4V
    In: Materials and Manufacturing Processes, Jg. 32, 2017, Nr. 5, S. 557 – 563
    DOI, Online Volltext (Open Access)
  • Hanke, Stefanie; Sena, Ian; Coelho, Rodrigo S.; dos Santos, Jorge F.
    Microstructural features of dynamic recrystallization in alloy 625 friction surfacing coatings
    In: Materials and Manufacturing Processes, 2017, S. 1 – 7
    DOI
  • Lemos, G.V.B.; Hanke, Stefanie; Dos Santos, J.F.; Bergmann, L.; Reguly, A.; Strohaecker, T.R.
    Progress in friction stir welding of Ni alloys
    In: Science and Technology of Welding and Joining, Jg. 22, 2017, Nr. 8, S. 643 – 657
    DOI
  • Belei, C.; Fitseva, V.; dos Santos, J.F.; Alcântara, N.G.; Hanke, Stefanie
    TiC particle reinforced Ti-6Al-4V friction surfacing coatings
    In: Surface and Coatings Technology, Jg. 329, 2017, S. 163 – 173
    DOI
  • Effertz, P.S.; Infante, V.; Quintino, L.; Suhuddin, U.; Hanke, Stefanie; Dos Santos, J.F.
    Fatigue life assessment of friction spot welded 7050-T76 aluminium alloy using Weibull distribution
    In: International Journal of Fatigue, Jg. 87, 2016, S. 381 – 390
    DOI
  • Fitseva; Hanke, Stefanie; Santos, J.F. dos; Stemmer, Priska; Gleising, Birgit
    The role of process temperature and rotational speed in the microstructure evolution of Ti-6Al-4V friction surfacing coatings
    In: Materials & Design, Jg. 110, 2016, S. 112 – 123
    DOI
  • Fitseva, V.; Krohn, H.; Hanke, Stefanie; dos Santos, J.F.
    Friction surfacing of Ti-6Al-4V : Process characteristics and deposition behaviour at various rotational speeds
    In: Surface and Coatings Technology, Jg. 278, 2015, S. 56 – 63
    DOI
  • Krohn, H.; Hanke, Stefanie; Beyer, M.; dos Santos, J.F.
    Influence of external cooling configuration on friction surfacing of AA6082 T6 over AA2024 T351
    In: Manufacturing Letters, Jg. 5, 2015, S. 17 – 20
    DOI, Online Volltext (Open Access)
  • Hanke, Stefanie; Fischer, Alfons; Santos, J. F. dos
    Sliding wear behaviour of a Cr-base alloy after microstructure alterations induced by friction surfacing
    In: Wear, Jg. 338-339, 2015, S. 332 – 338
    DOI, Online Volltext (Open Access)
  • Hanke, Stefanie; Beyer, Matthias; Silvonen, Aulis; dos Santos, Jorge Fernandez; Fischer, Alfons
    Cavitation erosion of Cr60Ni40 coatings generated by friction surfacing
    In: Wear, Jg. 301, 2013, Nr. 1-2, S. 415 – 423
    DOI
  • Hanke, Stefanie; Beyer, Matthias; Dos Santos, J.F.; Fischer, Alfons
    Friction surfacing of a cold work tool steel-Microstructure and sliding wear behavior
    In: Wear, Jg. 308, 2013, Nr. 1-2, S. 180 – 185
    DOI
  • Ranjbarnodeh, Eslam; Weiß, Sabine; Hanke, Stefanie; Fischer, Alfons
    EBSD characterization of the effect of welding parameters on haz of AISI409
    In: Journal of Mining and Metallurgy, Section B: Metallurgy, Jg. 48, 2012, Nr. 1, S. 115 – 121
    DOI
  • Ranjbarnodeh, Eslam; Hanke, Stefanie; Weiss, Sabine; Fischer, Alfons
    Effect of welding parameters on the heat-affected zone of AISI409 ferritic stainless steel
    In: International Journal of Minerals, Metallurgy and Materials, Jg. 19, 2012, Nr. 10, S. 923 – 929
    DOI
  • Hanke, Stefanie; Fischer, Alfons; Beyer, Matthias; dos Santos, Jorge
    Cavitation erosion of NiAl-bronze layers generated by friction surfacing
    In: Wear, Jg. 273, 2011, Nr. 1, S. 32 – 37
    DOI
  • Ranjbarnodeh, Eslam; Serajzadeh, Siamak; Hosein Kokabi, Amir; Hanke, Stefanie; Fischer, Alfons
    Finite element modeling of the effect of heat input on residual stresses in dissimilar joints
    In: The International Journal of Advanced Manufacturing Technology, Jg. 55, 2011, Nr. 5-8, - 656S. 649
    DOI

    • Vorworte / Nachworte

  • Hanke, Stefanie
    Message from the Editorial Chairwoman
    24th International Conference on Wear of Materials, 16.–20.04.2023, Banff, Alberta, Canada,
    In: Wear. Amsterdam: Elsevier, Jg. 522, 2023, 204892
    DOI

    • Beiträge in Sammelwerken und Tagungsbänden

  • Lübke, Christiane; Hanke, Stefanie; Weimar, Markus
    Barrieren beim Umstieg vom Individualverkehr auf den öffentlichen Personennahverkehr : Ein Mobilitätsexperiment zum Pendleralltag im Ruhrgebiet
    In: Making Connected Mobility Work: Technische und betriebswirtschaftliche Aspekte / Making Connected Mobility Work ; 12. Wissenschaftsforum Mobilität 2020 ; 18.06.2020, Duisburg (abgesagt) / Proff, Heike (Hrsg.). Wiesbaden: Springer Fachmedien, 2021, S. 371 – 379
    DOI
  • Ehrich, Jonas; Roos, Arne; Hanke, Stefanie
    Effect of mg and si content in aluminum alloys on friction surfacing processing behavior
    In: Light Metals 2019. Cham: Springer, 2019, S. 357 – 363
    DOI
  • Shen, Junjun; Hanke, Stefanie; Roos, Arne; Santos, Jorge F. Dos; Klusemann, Benjamin
    Fundamental study on additive manufacturing of aluminum alloys by friction surfacing layer deposition
    In: Proceedings of the 22nd International ESAFORM Conference on Material Forming / Proceedings of the 22nd International ESAFORM Conference on Material Forming, 8–10 May 2019, Vitoria-Gasteiz, Spain: American Institute of Physics Inc., 2019, S. 150015
    DOI
  • Janssen, Daniel; Hanke, Stefanie; Wimmer, Markus; Fischer, Alfons
    The influence of Mo on the fretting corrosion behaviour of CoCr-alloys vs. TiAl6V4
    In: EUROCORR 2017 - The Annual Congress of the European Federation of Corrosion, 20th International Corrosion Congress and Process Safety Congress 2017 / Joint European Corrosion Congress 2017, EUROCORR 2017 and 20th International Corrosion Congress and Process Safety Congress 2017, Prague Congress CentrePrague, Czech Republic, 3 September 2017 - 7 September 2017: Asociace koroznich inzenyru z.s.- AKI - Czech Association of Corrosion Engineers, 2017
  • Roos, Arne; Alba, Diego R.; Hanke, Stefanie; Wimmer, Georg; Dos Santos, Jorge F.
    Joining tube to tube sheet for coil wound heat exchangers by hybrid friction diffusion bonding
    In: Proceedings of the ASME 2015 Pressure Vessels and Piping Conference: Volume 6A: Materials and Fabrication / Kerr, Matthew; ASME 2015 Pressure Vessels and Piping Conference, PVP2015 , 19. - 23. Juli 2015, Boston, USA. New York: ASME, 2015
    DOI
  • Hanke, Stefanie; Schymura, Michael; Stickel, Daniel; Fischer, Alfons
    Wear behaviour of nanoporous alumina coatings from anodic oxidation
    In: 5th World Tribology Congress, WTC 2013 / 5th World Tribology Congress, WTC 2013; Torino; Italy; 8 September 2013 through 13 September 2013. Torino: Politecnico di Torino (DIMEAS), Jg. 2, 2013, S. 1412 – 1415

    • Dissertation

  • Hanke, Stefanie
    Microstructural alterations of commercial metallic alloys by friction surfacing
    Duisburg, Essen, 2014
    Online Volltext, Online Volltext