Personensuche

Personensuche

Bitte geben Sie den Namen der gesuchten Person ein.

Es wurde 1 Person gefunden.

Dr.-Ing. Sebastian Schuster

Anschrift
Lotharstraße 1
47057 Duisburg
Raum
MF 023a
Telefon
+49 203 379 3531
Telefax
+49 203 379 3038
E-Mail
s.schuster@uni-due.de

Funktionen

  • Wissenschaftliche/r Mitarbeiter/in, Strömungsmaschinen

Die folgenden Publikationen sind in der Online-Universitätsbibliographie der Universität Duisburg-Essen verzeichnet. Weitere Informationen finden Sie gegebenenfalls auch auf den persönlichen Webseiten der Person.

    Artikel in Zeitschriften

  • Ren, Haikun; Schuster, Sebastian; Brillert, Dieter
    A general model to evaluate the energy barrier to nucleation in vapour system by considering real gas approaches of the equation of state
    In: International Journal of Heat and Mass Transfer, Jg. 238, 2025, 126432
    DOI (Open Access)
  • Schuster, Sebastian; Wannek, Michael; Brillert, Dieter
    Computation of performance maps for centrifugal compressors in supercritical CO₂ applications : Influence of two-phase flow on choking mass flow rate
    In: Energy: The international journal, Jg. 336, 2025, 138249
    DOI (Open Access)
  • Ren, Haikun; Schuster, Sebastian; Brillert, Dieter
    Method for considering real gas equations of state in through-flow programs
    In: Energy: The international journal, Jg. 298, 2024, 131282
    DOI, Online Volltext (Open Access)
  • Schifflechner, Christopher; de Reus, Jasper; Schuster, Sebastian; Corpancho Villasana, Andreas; Brillert, Dieter; Saar, Martin O.; Spliethoff, Hartmut
    Paving the way for CO₂-Plume Geothermal (CPG) systems : A perspective on the CO₂ surface equipment
    In: Energy: The international journal, Jg. 305, 2024, 132258
    DOI (Open Access)
  • Doerr, Tobias; Schuster, Sebastian; Brillert, Dieter
    PDA Laser Measurements of Droplet-Laden Flows ina Four-Stage Axial Compressor
    In: Journal of Turbomachinery, Jg. 145, 2023, Nr. 2, 021013
    DOI
  • Lapp, Florian Felix; Schuster, Sebastian; Hecker, Simon; Brillert, Dieter
    Experimental Validation of an Analytical Condensation Model for Application in Steam Turbine Design
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP), Jg. 7, 2022, Nr. 1, 9
    DOI (Open Access)
  • Tegethoff, Katharina; Schuster, Sebastian; Brillert, Dieter
    Numerical simulation of real gas one-component two-phase flow using a Roe-based scheme
    In: Computers & Fluids, Jg. 245, 2022, 105560
    DOI
  • Schröder, Tilman Raphael; Schuster, Sebastian; Brillert, Dieter
    Experimental investigation of centrifugal flow in rotor–stator cavities at high reynolds numbers > 10⁸
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP), Jg. 6, 2021, Nr. 2, 13
    DOI (Open Access)
  • Hacks, Alexander; Schuster, Sebastian; Brillert, Dieter
    Impact of volumetric system design on compressor inlet conditions in supercritical CO2 cycles
    In: Journal of the Global Power and Propulsion Society, Jg. 5, 2021, S. 104 – 110
    DOI (Open Access)
  • Doerr, T.; Braun, S.; Schuster, Sebastian; Brillert, Dieter
    Proof of concept for a novel interstage injection design in axial compressors
    In: Journal of Engineering for Gas Turbines and Power, Jg. 143, 2021, Nr. 6, 061030
    DOI
  • Hacks, Alexander Johannes; Schuster, Sebastian; Brillert, Dieter
    Stabilizing effects of supercritical CO₂ fluid properties on compressor operation
    13th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics (ETC2019): Lausanne, Switzerland; 8–12 April 2019,
    In: International Journal of Turbomachinery, Propulsion and Power (IJTPP), Jg. 4, 2019, Nr. 3, 20
    DOI (Open Access)
  • Schuster, Sebastian; Brillert, Dieter; Benra, Friedrich-Karl
    Condensation in Radial Turbines : Part I: Mathematical Modeling
    In: Journal of Turbomachinery, Jg. 140, 2018, Nr. 10, S. 101001
    DOI
  • Schuster, Sebastian; Brillert, Dieter; Benra, Friedrich-Karl
    Condensation in radial turbines : Part II: Application of the mathematical model to a radial turbine series
    In: Journal of Turbomachinery, Jg. 140, 2018, Nr. 10, S. 101002
    DOI
  • Starzmann, Jörg; Hughes, Fiona R.; Schuster, Sebastian; White, Alexander J.; Halama, Jan; Hric, Vladimir; Kolovratník, Michal; Lee, Hoon; Sova, Libor; Št’astný, Miroslav; Grübel, Marius; Schatz, Markus; Vogt, Damian M.; Patel, Yogini; Patel, Giteshkumar; Turunen-Saaresti, Teemu; Gribin, Vladimir; Tishchenko, Victor; Gavrilov, Ilya; Kim, Changhyun; Baek, Jehyun; Wu, Xiaoming; Yang, Jiandao; Dykas, Sławomir; Wróblewski, Włodzimierz; Yamamoto, Satoru; Feng, Zhenping; Li, Liang
    Results of the International Wet Steam Modeling Project
    In: Proceedings of the Institution of Mechanical Engineers: Part A, Journal of Power and Energy, Jg. 232, 2018, Nr. 5, S. 550 – 570
    DOI (Open Access)
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter
    Droplet deposition in radial turbines
    In: European Journal of Mechanics / B: Fluids, Jg. 61, 2017, S. 289 – 296
    DOI
  • Benra, Friedrich-Karl; Dohmen, Hans-Josef; Pei, Ji; Schuster, Sebastian; Wan, Bo
    A Comparison of One-Way and Two-Way Coupling Methods for Numerical Analysis of Fluid-Structure Interactions
    In: Journal of Applied Mathematics, Jg. 2011, 2011, Nr. 6, 853560
    DOI
  • Schuster, Sebastian; Benra, Friedrich-Karl; Dohmen, Hans-Josef
    Application of Euler-Euler model for numerical simulation of a radial turbine working in the two-phase flow regime
    In: WSEAS Transactions on Fluid Mechanics / World Scientific and Engineering Academy and Society (WSEAS) (Hrsg.), Jg. 5, 2010, Nr. 4, S. 276 – 286
  • Schuster, Sebastian; Wacker, Arno; Weis, Torben
    Fighting cheating in P2P-based MMVEs with disjoint path routing
    Workshops der Wissenschaftlichen Konferenz Kommunikation in Verteilten Systemen 2009 (WowKiVS 2009),
    In: Electronic Communications of the EASST, Jg. 17, 2009
    DOI, Online Volltext (Open Access)
  • Wacker, Arno; Schiele, Gregor; Schuster, Sebastian; Weis, Torben
    Towards an authentication service for peer-to-peer based massively multiuser virtual environments
    In: International Journal of Advanced Media and Communication (IJAMC), Jg. 2, 2008, Nr. 4, S. 364 – 379
    DOI

    • Aufsätze

  • Hacks, Alexander; Abd El Hussein, Ihab; Ren, Haikun; Schuster, Sebastian; Brillert, Dieter; Abd El Hussein, Ihab
    Experimental Data of Supercritical Carbon Dioxide (sCO₂) Compressor at Various Fluid States
    In: Journal of Engineering for Gas Turbines and Power. New York: American Society of Mechanical Engineers (ASME), Jg. 144, 2022, Nr. 4, 041012
    DOI (Open Access)
  • Hacks, Alexander; Schuster, Sebastian; Dohmen, Hans-Josef; Benra, Friedrich-Karl; Brillert, Dieter
    Turbomachine Design for Supercritical Carbon Dioxide Within the sCO2-HeRo.eu Project
    In: Journal of Engineering for Gas Turbines and Power. New York: American Society of Mechanical Engineers (ASME), Jg. 140, 2018, Nr. 12, 121017
    DOI (Open Access)

    • Preprints

  • Folkers, Steffen; Schuster, Sebastian
    Inverse Design Method for Centrifugal Compressors in Carnot batteries
    38th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2025), 29th June to 4th July 2025, Paris,
    Duisburg, Essen, 2025
    DOI, Online Volltext (Open Access)

    • Beiträge in Sammelwerken und Tagungsbänden

  • Schuster, Sebastian; Wannek, Michael; Brillert, Dieter
    Computation of Performance Maps for Centrifugal Compressors in Supercritical CO2 Applications : Influence of Two-Phase Flow on choking mass flow rate
    In: Conference Proceedings of The European Conference on SUPERCRITICAL CO₂ for Energy Systems: 6th edition / Brillert, Dieter; 6th European Conference on Supercritical CO2 (sCO2 europe) for Energy Systems, 9-11 April 2025, Delft / sCO2-Flex Project (Hrsg.). Duisburg, Essen: DuEPublico, 2025, S. 16 – 25
    DOI, Online Volltext (Open Access)
  • Tegethoff, Katharina; Schuster, Sebastian
    Sensitivity Analysis of Phase Change Modelling for Non-Ideal Fluids in Turbomachinery Applications
    In: Proceedings of the ASME Turbo Expo: Volume 9: Structures and Dynamics: Structural Mechanics & Vibration; Supercritical CO2 / ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition; June 16–20, 2025; Memphis, USA / American Society of Mechanical Engineers (Hrsg.). New York: ASME, 2025, V009T28A003
    DOI (Open Access)
  • Tegethoff, Katharina; de Almeida, Carolina Borges; Schuster, Sebastian; Brillert, Dieter; Borges de Almeida, Carolina
    Numerical Method for Investigating Non-Ideal Flow Demonstrated on a Centrifugal Compressor Operating Near the Critical Point of CO2
    In: ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition: Volume 11: Supercritical CO2. New York: American Society of Mechanical Engineers (ASME), 2024, V011T28A012
    DOI
  • Schifflechner, Christopher; de Reus, Jasper; Spliethoff, Hartmut; Saar, Martin O.; Schuster, Sebastian; Brillert, Dieter
    The potential of CO₂-Plume Geothermal (CPG) Systems for CO₂ component manufacturers : Opportunities and development needs
    In: Proceedings of the 7th International Seminar on ORC Power System (ORC 2023) / 7th International Seminar on ORC Power System (ORC 2023); 4th to 6th September 2023; Seville, Spain / López Serena, Araceli; Leal Abad, Elena (Hrsg.). Sevilla: Editorial Universidad de Sevilla, 2024, S. 400 – 409
    DOI, Online Volltext (Open Access)
  • Folkers, Steffen; Schuster, Sebastian; Brillert, Dieter
    Transfer Functions for the Inverse Design of Turbomachinery for Thermal Power Storage
    In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition ; (GT2024) ; Volume 6 / 69th ASME Turbo Expo ; June 24-28, 2024, London, UK / American Society of Mechanical Engineers (Hrsg.). Little Falls: American Society of Mechanical Engineers (ASME), 2024, GT2024-123272
    DOI
  • Martens, Oliver; Schuster, Sebastian; Brillert, Dieter
    An Euler-Based Throughflow Approach for Axial Compressors
    In: Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition (GT 2023) / ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition (GT 2023): Boston, USA; 26 - 30 June 2023. New York: American Society of Mechanical Engineers (ASME), Jg. 13C, 2023, v13ct32a013
    DOI
  • Ren, Haikun; Schuster, Sebastian; Brillert, Dieter
    Further development of a through-flow program by considering real gas equation of state
    In: Conference Proceedings of the 5th European sCO2 Conference 2023 / Brillert, Dieter; 5th European sCO2 Conference for Energy Systems : March 14-16, 2023, Prague, Czech Republic / sCO2-Flex Project (Hrsg.). Duisburg, Essen: DuEPublico, 2023, S. 58 – 65
    DOI, Online Volltext (Open Access)
  • Tegethoff, Katharina; Musch, Christian; Glos, Stefan; Schuster, Sebastian; Brillert, Dieter
    Investigation of the Applicability of Methods Approved for Steam to the Design of Labyrinth Seals in Turbines Operated With CO2 in Supercritical State
    In: Proceedings of ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition (GT 2023): Volume 12: Supercritical CO2 / ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition June 26–30, 2023 Boston, Massachusetts. New York: American Society of Mechanical Engineers (ASME), 2023, v012t28a011
    DOI
  • Abd-El-Hussein, I.; Mäki-Iso, M.; Tiainen, J.; Turunen-Saaresti, T.; Schuster, Sebastian; Brillert, Dieter
    Reduction of Mechanical Stresses in Centrifugal Compressor Impellers for Hydrogen Applications
    In: 15th European Conference on Turbomachinery Fluid Dynamics & Thermodynamics / 15th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics ; ETC15 ; 24 - 28 April 2023, Budapest, Hungary / European Turbomachinery Society (Hrsg.): European Turbomachinery Society, 2023, ETC2023-109
    DOI (Open Access)
  • Jenzen, Rebecca; Woiczinski, Christian; Schuster, Sebastian; Brillert, Dieter
    An Euler-Based Throughflow Approach for Centrifugal Compressors : Part A: Extension and Modifications of Models
    In: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 7: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Microturbines, Turbochargers, and Small Turbomachines; Oil & Gas Applications / 67. ASME Turbo Expo, June 13-17, 2022, Rotterdam, The Netherlands. New York, N.Y.: American Society of Mechanical Engineers (ASME), 2022, V007T19A007
    DOI
  • Tiainen, Jonna; Turunen-Saaresti, Teemu; Mäki-Iso, Mikko; Schuster, Sebastian; Brillert, Dieter
    Hydrogen Compression : Towards a New Strategy for the Design of Hydrogen Compressors
    In: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 10B: Turbomachinery — Axial Flow Turbine Aerodynamics; Deposition, Erosion, Fouling, and Icing; Radial Turbomachinery Aerodynamics / SME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022), June 13-17, 2022, Rotterdam, The Netherlands. New York, N.Y.: American Society of Mechanical Engineers (ASME), 2022, V10BT35A001
    DOI
  • Doerr, Tobias; Schuster, Sebastian; Brillert, Dieter
    PDA Laser Measurements of Droplet-Laden Flows in a Four Stage Axial Compressor
    In: Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT 2022): Volume 10A: Turbomachinery — Axial Flow Fan and Compressor Aerodynamics / 67. ASME Turbo Expo, June 13-17, 2022, Rotterdam, The Netherlands. New York, N.Y.: American Society of Mechanical Engineers (ASME), 2022, V10AT29A007
    DOI
  • Abd El Hussein, Ihab; Schuster, Sebastian; Brillert, Dieter
    An attempt for establishing pressure ratio performance maps for supercritical carbon dioxide compressors in power applications
    In: Conference Proceedings of the 4th European sCO₂ Conference 2021 / 4th European sCO₂ Conference for Energy Systems, 23-24 March 2021, Online Conference / Brillert, Dieter (Hrsg.). Duisburg, Essen: DuEPublico, 2021, S. 124 – 130
    DOI, Online Volltext (Open Access)
  • Dörr, Tobias; Schuster, Sebastian; Brillert, Dieter
    Evaluation of performance gain by interstage injection in a four-stage axial compressor
    In: ASME Turbo Expo 2021: Volume 7: Industrial and Cogeneration; Manufacturing Materials and Metallurgy: American Society of Mechanical Engineers (ASME), Jg. 7, 2021, V007T16A002
    DOI
  • Schröder, Tilman Raphael; Schuster, Sebastian; Brillert, Dieter
    Experimental Investigation of Centrifugal Flow in Rotor-Stator Cavities at High Reynolds Numbers > 10⁸
    In: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.): European Turbomachinery Society, 2021, ETC2021-651
  • Lapp, Florian Felix; Schuster, Sebastian; Hecker, Simon; Brillert, Dieter
    Experimental validation of an analytical condensation model for the improvement of steam turbine design regarding flexibility requirements
    In: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.): European Turbomachinery Society, 2021, ETC2021-562
  • Ren, Haikun; Hacks, Alexander; Schuster, Sebastian; Brillert, Dieter
    Mean-line analysis for supercritical CO₂ centrifugal compressors by using enthalpy loss coefficients
    In: Conference Proceedings of the 4th European sCO₂ Conference 2021 / 4th European sCO₂ Conference for Energy Systems, 23-24 March 2021, Online Conference / Brillert, Dieter (Hrsg.). Duisburg, Essen: DuEPublico, 2021, S. 68 – 77
    DOI, Online Volltext (Open Access)
  • Abd El Hussein, Ihab; Schuster, Sebastian; Brillert, Dieter
    The effect of the isentropic exponent on the performance map of supercritical compressors with carbon dioxide as an example
    In: 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 14th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT14, April 12-16, 2021; virtual conference / European Turbomachinery Society (Hrsg.): European Turbomachinery Society, 2021, ETC2021-667
    DOI (Open Access)
  • Abd El Hussein, Ihab; Hacks, Alexander; Schuster, Sebastian; Brillert, Dieter
    A design tool for supercritical CO2 radial compressors based on the two-zone model
    In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 11: Structures and Dynamics: Structural Mechanics, Vibration, and Damping; Supercritical CO2 / GT 2020; Virtual, Online; 21 - 25 September 2020. New York: American Society of Mechanical Engineers (ASME), 2020, S. V011T31A012
    DOI (Open Access)
  • Schuster, Sebastian; Dohmen, Hans-Josef; Brillert, Dieter
    Challenges of compressing hydrogen for pipeline transportation with centrifugal-compressors
    In: Proceedings of Global Power and Propulsion Society / GPPS Chania20; 7th – 9th September, 2020. Zug: Global Power and Propulsion Society (GPPS), 2020, GPPS-CH-2020-0045
    DOI (Open Access)
  • Hacks, Alexander; Schuster, Sebastian; Brillert, Dieter
    Impact of volumetric system design on compressor inlet conditions in supercritical CO2 cycles
    In: Proceedings of Global Power and Propulsion Society / GPPS Chania20; 7th – 9th September, 2020. Zug: Global Power and Propulsion Society (GPPS), 2020
    DOI (Open Access)
  • Schröder, Tilman Raphael; Schuster, Sebastian; Brillert, Dieter
    Prediction in rotor–stator cavities at high reynolds numbers up to Re ≈ 2 ∙ 10⁸: Towards a new parametric model
    In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 2E: Turbomachinery / GT 2020; Virtual, Online; 21 - 25 September 2020. New York: American Society of Mechanical Engineers (ASME), 2020, S. V02ET39A001
    DOI
  • Dörr, Tobias; Braun, Stefan; Schuster, Sebastian; Brillert, Dieter
    Proof of concept for a novel interstage injection design in axial compressors
    In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition / GT 2020; Virtual, Online; 21 - 25 September 2020. New York: American Society of Mechanical Engineers (ASME), Jg. 8: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Marine; Microturbines, Turbochargers, and Small Turbomachines, 2020, S. V008T17A005
    DOI
  • Lapp, Florian Felix; Hecker, Simon; Schuster, Sebastian; Brillert, Dieter
    The multi-phase flow test facility ⇜emma⇝ to investigate local heat transfer coefficients and liquid water films at wet steam conditions
    In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition: Vol. 9: Oil and Gas Applications; Organic Rankine Cycle Power Systems; Steam Turbine / GT 2020; Virtual, Online; 21 - 25 September 2020. New York: American Society of Mechanical Engineers (ASME), 2020, S. V009T23A028
    DOI
  • Schuster, Sebastian; Brillert, Dieter; Martens, Uwe; Hermes, Viktor; Benra, Friedrich-Karl
    Investigation of the evaporation process of liquefied hydrocarbons in front of a compressor
    In: ISROMAC 2017 / 17th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC 2017, 16.-21.12.2017, Maui, Hawaii, USA, 2019
    Online Volltext (Open Access)
  • Hacks, Alexander; Schuster, Sebastian; Brillert, Dieter
    Stabilizing Effects of Supercritical CO2 Fluid Properties on Compressor Operation
    In: 13th European Turbomachinery Conference on Turbomachinery Fluid Dynamics and Thermodynamics / ETC 2019; Lausanne, Switzerland; 8 - 12 April 2019. Florence: European Turbomachinery Society, 2019, S. 121
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter
    Droplet deposition in radial turbines
    In: 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Apr 2016, Honolulu, United States / ISROMAC: 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 10.-15.04.2016, Honolulu, United States, 2018
    Online Volltext (Open Access)
  • Schuster, Sebastian; Brillert, Dieter; Hermes, Viktor; Yildiz, Attilla; Benra, Friedrich-Karl
    Thermodynamic modelling aspects of wet compression in radial compressors
    In: Proceedings of the ASME Turbo Expo: Volume 9: Oil and Gas Applications; Supercritical CO2 Power Cycles; Wind Energy / ASME Turbo Expo 2018, Oslo, Norway, June 11–15, 2018. New York: American Society of Mechanical Engineers (ASME), 2018, S. V009T27A024
    DOI
  • Hacks, Alexander; Schuster, Sebastian; Dohmen, Hans-Josef; Benra, Friedrich-Karl; Brillert, Dieter
    Turbomachine design for supercritical carbon dioxide within the SCO₂-hero.EU project
    In: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition / GT 2018; Oslo; Norway; 11 - 15 June 2018: American Society of Mechanical Engineers (ASME), Jg. 9, 2018
    DOI
  • Strätz, Marcel; Seewald, Michael; Starflinger, Jörg; Schuster, Sebastian; Mertz, Rainer; Brillert, Dieter
    Cycle calculations of a small-scale heat removal system with supercritical CO2 as working fluid
    In: Proceedings of the 25th International Conference on Nuclear Engineering - 2017: Vol. 3: Nuclear fuel and material, reactor physics and transport theory; innovative nuclear power plant design and new technology application / 25th International Conference on Nuclear Engineering, Shanghai, China, July 2–6, 2017. New York: American Society of Mechanical Engineers (ASME), 2017, S. V003T13A001
    DOI
  • Schuster, Sebastian; Kreischer, Christian; Brillert, Dieter
    Introduction of an integrated turbo-electrical machine
    In: Proceedings of the ASME Turbo Expo: Vol. 8: Microturbines, Turbochargers, and Small Turbomachines; Steam Turbines / ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina, USA, June 26–30, 2017. New York: American Society of Mechanical Engineers (ASME), 2017, S. V008T26A008
    DOI
  • Benra, Friedrich-Karl; Brillert, Dieter; Frybort, P.; Hajek, P.; Rohde, M.; Schuster, Sebastian; Seewald, M.; Starfinger, J.
    A supercritical CO2 low temperature Brayton-cycle for residual heat removal
    In: 5th International sCO2 Power Cycles Symposium: Proceedings / The 5th International Symposium - Supercritical CO2 Power Cycles, 28-31 März 2016, San Antonio, Texas, 2016
    Online Volltext
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter
    Reliability of condensation models for droplet deposition calculation in radial turbines
    Wet Steam Conference, 2016,
    In: Wet Steam Conference Prague: Proceedings / Wet Steam Conference Prague : 12-14 September 2016 / Kolovratník, Michal (Hrsg.). Praha: České vysoké učení technické v Praze, 2016
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter
    Reliability of condensation models for droplet deposition calculations in radial turbines
    In: Wet Stream Conference: 12-14 September 2016 : proceedings / Wet Steam Conference Prague, 12-14 September 2016, Prague, Czech Republic / Kolovratník, Michal; Ondřej, Bartoš (Hrsg.). Prag: České vysoké učení technické v Praze, 2016, S. 78 – 89
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter
    Small scale sCO2 compressor impeller design considering real fluid conditions
    In: The 5th International Symposium - Supercritical CO2 Power Cycles / The 5th International Symposium - Supercritical CO2 Power Cycles, March 28- 31, 2016, San Antonio, Texas, 2016
  • Barabas, Botond; Clauss, Stefan; Schuster, Sebastian; Benra, Friedrich-Karl; Dohmen, Hans-Josef; Brillert, Dieter
    Experimental and Numerical Determination of Pressure and Velocity Distribution Inside a Rotor-Stator Cavity at Very High Circumferential Reynolds Numbers
    In: 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics / 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ECT11, March 23-27, 2015, Madrid, Spain / European Turbomachinery Society (Hrsg.): European Turbomachinery Society, 2015, ETC2015-097
    Online Volltext (Open Access)
  • Dohmen, Hans-Josef; Benra, Friedrich-Karl; Schepers, Cornelius; Schuster, Sebastian
    Analyze of the size of secondary droplets due to film separation at the blade trailing edge
    In: Proceedings of the ASME 4th Joint US-EuropeanFluids Engineering Division Summer Meeting 2014: Vol. 1: Symposia / ASME Fluids Engineering Division Summer Meeting; August 3 - 7, 2014; Chicago, USA. New York: ASME, 2014, S. V01BT10A006
    DOI
  • Schuster, Sebastian; Benra, Friedrich-Karl; Dohmen, Hans-Josef; König, Sven; Martens, Uwe
    Sensitivity analysis of condensation model constants on calculated liquid film motion in radial turbines
    In: Proceedings of the ASME Turbo Expo 2014: Volume 1B: Marine; Microturbines, Turbochargers and Small Turbomachines; Steam Turbines / ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, June 16–20, 2014; Düsseldorf, Germany / Hodson, Howard (Hrsg.). New York: ASME, 2014, S. V01BT27A021
    DOI
  • Schuster, Sebastian; Benra, Friedrich-Karl; Dohmen, Hans-Josef; König, Sven; Martens, Uwe
    Sensitivity of condensation calculations on model coefficients with respect to turbo machinery applications
    In: 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery: ISROMAC 2014 : Honolulu, Hawaii, USA, 24 -28 February 2014, 2014
  • Schuster, Sebastian; Benra, Friedrich-Karl; Dohmen, Hans-Josef; König, Sven; Martens, Uwe
    Influence of Different Gas Models on the Numerical Results of High-Velocity Condensation
    In: 15th Conference on Modelling Fluid Flow / CMFF'12, 4 - 7 September 2012, Budapest, Hungary. Budapest, Hungary, 2012
  • Schuster, Sebastian; Benra, Friedrich-Karl; Dohmen, Hans-Josef
    Numerical Simulation of a Micro Pelton Turbine Working in the Two-Phase Flow Regime
    In: Proceedings of the ASME Fluids Engineering Division Summer Meeting - 2012: Vol. 1: Symposia, Part A / FEDSM`12, July 8 - 12, 2012, Rio Grande, Puerto Rico. New York: ASME, 2012, S. 357 – 365
    DOI
  • Schuster, Sebastian; Weis, Torben
    Enforcing game rules in untrusted P2P-based MMVEs
    In: Proceedings of the 4th International ICST Conference on Simulation Tools and Techniques / SIMUTools '11; Barcelona, Spain; March 22 - 24, 2011. Brüssel: ICST, 2011, S. 288 – 295
    DOI, Online Volltext
  • Schuster, Sebastian; Benra, Friedrich-Karl; Dohmen, Hans-Josef
    Investigation of Nucleation Influence on the Efficiency of Radial Turbines
    In: 12th International Conference on Multiphase Flow in Industrial Plants, MFIP12 / International Conference Multiphase Flow in Industrial Plants, Ischia (Napoli), Italy, September 21-23, 2011. Ischia, Italy, 2011
  • Holzapfel, Sebastian; Schuster, Sebastian; Weis, Torben
    VoroStore – A Secure and Reliable Data Storage for Peer-to-Peer-Based MMVEs
    In: 11th IEEE International Conference on Computer and Information Technology / CIT 2011; Pafos, Cyprus; 31 August - 2 September 2011. Piscataway: IEEE, 2011, S. 35 – 40
    DOI, Online Volltext

    • Dissertation

  • Schuster, Sebastian
    Untersuchung der Entstehung und Bewegung von Flüssigkeitsansammlungen auf Radialturbinenlaufradschaufeln mit einem erweiterten Navier-Stokes-Löser
    Aachen, 2016(Berichte aus der Strömungstechnik)
  • Schuster, Sebastian
    Cheating prevention in peer-to-peer based massively multiuser virtual environments
    Duisburg, Essen, 2013
    Online Volltext, Online Volltext

    • Vorträge

  • Schuster, Sebastian; Hacks, Alexander; Brillert, Dieter
    Lessons from testing the sCO2-HeRo turbo-compressor-system
    7th International Supercritical CO2Power Cycles Symposium: March 31 – April 2, 2020, San Antonio, USA,
    San Antonio, USA, 2020
    Online Volltext
  • Schuster, Sebastian; Benra, Friedrich-Karl; Brillert, Dieter
    Small scale sCO2 compressor impeller design considering real gas conditions
    5th International sCO2 Power Cycles Symposium, San Antonio, Texas, USA, March 29–31, 2016,
    San Antonio, Texas, 2016
  • Benra, Friedrich-Karl; Brillert, Dieter; Frybort, O.; Hajek, P.; Rohde, M.; Schuster, Sebastian; Seewald, M.; Starflinger, J.
    The supercritical CO2 heat removal system - sCO2-HeRo
    1st European Seminar on Supercritical CO2 (sCO2) Power Systems 29.-30. September 2016 - Vienna - Austria,
    2016
  • Schuster, Sebastian; Benra, Friedrich-Karl; Dohmen, Hans-Josef; Fagerli, B.
    Numerical simulation of two phase flow in a Pelton turbine with Eulerian-Eulerian method
    8th ANSYS & FZD Multiphase Flows Short Course and Workshop, Dresden, Juni 2010,
    Dresden, 2010
  • Schuster, Sebastian; Benra, Friedrich-Karl; Dohmen, Hans-Josef; Fagerli, B.
    Numerical simulation of twophase flow in a Pelton turbine with Eulerian-Eulerian method
    8th Joint ANSYS & FZD Multiphase Flows Workshop, 23 - 24 June, 2010, Dresden-Rossendorf, Germany,
    Dresden, 2010

    • Forschungsdaten

  • Hacks, Alexander; Abd El Hussein, Ihab; Ren, Haikun; Schuster, Sebastian; Brillert, Dieter
    Experimental Data of Supercritical Carbon Dioxide (sCO2) Compressor at Various Fluid States - Supplementary Data
    2021
    DOI, Online Volltext (Open Access)