Lisa Scheunemann

Research

  • Coupled micro-macro FE formulations for micro-heterogeneous materials with application to dual-phase steels
  • Construction of statistically similar RVEs in 3D
  • Analysis of statistical measures for the characterization of microstructure morphologies
  • Modelling of crystal plasticity in the framework of the infeasible interior point method

 

Teaching

  • Tutorium Mechanik 1-3
  • Mechanik 1 (Stereostatik / Elastostatik I)
  • Mechanik 2 (Elastostatik II / Hydromechanik)
  • Lineare FEM/ FEM Foundations
  • Nonlinear Finite Element Method
  • Elastostatik 2: Technische Schwingungslehre
  • Computational Inelasticity
  • Technische Mechanik 3
  • Tensor Calculus
  • Continuum Mechanics
  • Effective Properties of Microheterogeneous Materials

Career

2005 High School Diploma (Abitur) at Freiherr-vom-Stein Gymnasium, Oberhausen
2006-2009 Engineering studies (civil engineering) B.Sc. at University Duisburg-Essen
2008-2009 Semester abroad at Tampere University of Technology, Tampere, Finland
2009-2011   

Master studies (Computational Mechanics) M.Sc. at University Duisburg-Essen

07/2017

Doctoral degree (Dr.-Ing.), University Duisburg Essen, Title: "Scale-briding of elasto-plastic microstructures using statistically similar representative volume elements"

2011-2018 Research assistant at Institute of Mechanics, University Duisburg-Essen
since 06/2018    "Akademische Rätin a.Z." at Institute of Mechanics, University Duisburg-Essen
since 2019  Appointment as member of GAMM Juniors

Supervised theses

  • Uebing, S. (2018), „Numerical simulation of metal heat treatment using fully coupled thermo-elasto-plasticity". Masterthesis, Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
  • Sundu, K. (2018), „A small strain single crystal plasticity algorithm for face- and body-centered cubic unit cells using ANSYS UMAT". Masterthesis, Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.

  • Paul, F. (2018), „Schwingungsanalyse diskreter Mehrmassensysteme in Matlab". Bachelorthesis, Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.

  • Lemke, V. (2016), „A homogenization scheme for thermomechanically coupled boundary value problems". Masterthesis, Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.

  • Bergmann, J. (2016), „Stochastic modeling of a one-dimensional beam considering uncertain parameters". Masterthesis, Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.

  • Sarraf, S. (2016), „Analysis of the influence of microstructure morphology for finite-element modeling using multiphase elements.". Masterthesis, Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.

  • Lemke, V. (2014), „Finite Element Modelling of 2D Multiphase Microstructures using Gauss-Point Method". Bachelorthesis, Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.

  • Bergmann, J.(2014), „Three-dimensional Reconstruction of Two-Phase Microstructures based on EBSD-FIB measurements". Bachelorthesis, Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.

Publications

JabRef References output

QuickSearch:   Number of matching entries: 0.

Search Settings

Behrens, B.-A., Schröder, J., Brands, D., Scheunemann, L., Niekamp, R., Chugreev, A., Sarhil, M., Uebing, S. & Kock, C. (2019), "Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505", Metals. Vol. 9(4), pp. 480 (28 pages).
BibTeX:
@article{BraChuKocNieSchUebBehSch:2019:ean,
  author = {Behrens, B.-A. and Schröder, J. and Brands, D. and Scheunemann, L. and Niekamp, R. and Chugreev, A. and Sarhil, M. and Uebing, S. and Kock, C.},
  title = {Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505},
  journal = {Metals},
  year = {2019},
  volume = {9},
  number = {4},
  pages = {480 (28 pages)}
}
L. Scheunemann, P.S.B. Nigro, J.S.P.M.P. (submitted 2019), "A Novel Algorithm for Rate Independent Small Strain Crystal Plasticity based on the Infeasible Primal-Dual Interior Point Method", International Journal of Plasticity.
BibTeX:
@article{SchNigSchPim:2019:ana,
  author = {L. Scheunemann, P.S.B. Nigro, J. Schröder, P.M. Pimenta},
  title = {A Novel Algorithm for Rate Independent Small Strain Crystal Plasticity based on the Infeasible Primal-Dual Interior Point Method},
  journal = {International Journal of Plasticity},
  year = {2019}
}
Brands, D., Chugreev, A., Kock, C., Niekamp, R., Scheunemann, L., Uebing, S., Behrens, B.-A. & Schröder, J. (2018), "On the analysis of microstructural residual stresses in hot bulk forming parts under specific cooling", Proceedings in Applied Mathematics and Mechanics. Vol. 18(1), pp. e201800256 (4 pages).
BibTeX:
@article{BraChuKocNieSchUebBehSch:2018:ota,
  author = {Brands, D. and Chugreev, A. and Kock, C. and Niekamp, R. and Scheunemann, L. and Uebing, S. and Behrens, B.-A. and Schröder, J.},
  title = {On the analysis of microstructural residual stresses in hot bulk forming parts under specific cooling},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2018},
  volume = {18},
  number = {1},
  pages = {e201800256 (4 pages)}
}
Gandhi, A., Balzani, D., Brands, D., Scheunemann, L. & Schröder, J. (2018), "A Computational Two-Scale Model for the Simulation of Dual-Phase Steels under Cyclic Loading", Proceedings in Applied Mathematics and Mechanics. Vol. 18(1), pp. e201800321 (2 pages).
BibTeX:
@article{GanBalBraSchSch:2018:act,
  author = {Gandhi, Ashutosh and Balzani, Daniel and Brands, Dominik and Scheunemann, Lisa and Schröder, Jörg},
  title = {A Computational Two-Scale Model for the Simulation of Dual-Phase Steels under Cyclic Loading},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2018},
  volume = {18},
  number = {1},
  pages = {e201800321 (2 pages)}
}
Scheunemann, L. (2017), "Scale-briding of elasto-plastic microstructures using statistically similar representative volume elements". School: Universität Duisburg-Essen.
BibTeX:
@phdthesis{Sch:2017:,
  author = {Scheunemann, L.},
  title = {Scale-briding of elasto-plastic microstructures using statistically similar representative volume elements},
  school = {Universität Duisburg-Essen},
  year = {2017},
  note = {Report No. 16 (2017) of the Institut für Mechanik, Universität Duisburg-Essen}
}
Schröder, J., Klawonn, A., Scheunemann, L. & Lanser, M. (2017), "Hochleistungsrechnen trifft Hochleistungsstahl", In Essener Unikate 50: Natur-, Ingenieur- und Wirtschaftswissenschaften -- High-Performance und Cloud Computing. Universität Duisburg-Essen.
BibTeX:
@incollection{SchKlaSchLan:2017:hth,
  author = {Schröder, J. and Klawonn, A. and Scheunemann, L. and Lanser, M.},
  title = {Hochleistungsrechnen trifft Hochleistungsstahl},
  booktitle = {Essener Unikate 50: Natur-, Ingenieur- und Wirtschaftswissenschaften -- High-Performance und Cloud Computing},
  publisher = {Universität Duisburg-Essen},
  year = {2017}
}
Brands, D., Balzani, D., Scheunemann, L., Schröder, J., Richter, H. & Raabe, D. (2016), "Computational Modeling of Dual-Phase Steels Based on Representative Three-Dimensional Microstructures Obtained from EBSD Data", Archive of Applied Mechanics. Vol. 86(3), pp. 575-598.
BibTeX:
@article{BalBalSchSchRicRaa:2016:cmo,
  author = {Brands, D. and Balzani, D. and Scheunemann, L. and Schröder, J. and Richter, H. and Raabe, D.},
  title = {Computational Modeling of Dual-Phase Steels Based on Representative Three-Dimensional Microstructures Obtained from EBSD Data},
  journal = {Archive of Applied Mechanics},
  year = {2016},
  volume = {86},
  number = {3},
  pages = {575--598}
}
Scheunemann, L., Schröder, J. & Brands, D. (2016), "Macroscopic yield curves based on statistically similar RVEs for 3D dual-phase steel microstructure", In Insights and Innovations in Structural Engineering, Mechanics & Computation. Cape Town, South Africa , pp. 433-438. CRC Press.
BibTeX:
@incollection{SchSchBra:2016:myc,
  author = {L. Scheunemann and J. Schröder and D. Brands},
  title = {Macroscopic yield curves based on statistically similar RVEs for 3D dual-phase steel microstructure},
  booktitle = {Insights and Innovations in Structural Engineering, Mechanics & Computation},
  publisher = {CRC Press},
  year = {2016},
  pages = {433--438}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "Construction of Statistically Similar RVEs", In Analysis and Computation of Microstructure in Finite Plasticity. Lecture Notes in Applied and Computational Mechanics (78). Springer.
BibTeX:
@incollection{SchBalBraSch:2015:cos,
  author = {L. Scheunemann and D. Balzani and D. Brands and J. Schröder},
  title = {Construction of Statistically Similar RVEs},
  booktitle = {Analysis and Computation of Microstructure in Finite Plasticity. Lecture Notes in Applied and Computational Mechanics (78)},
  publisher = {Springer},
  year = {2015}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "Design of 3D Statistically Similar Representative Volume Elements based on Minkowski Functionals", Mechanics of Materials. Vol. 90, pp. 185-201.
BibTeX:
@article{SchBalBraSch:2015:do3,
  author = {L. Scheunemann and D. Balzani and D. Brands and J. Schröder},
  title = {Design of 3D Statistically Similar Representative Volume Elements based on Minkowski Functionals},
  journal = {Mechanics of Materials},
  year = {2015},
  volume = {90},
  pages = {185--201}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "Study on statistically similar RVEs for real microstructures based on different statistical descriptors", Proceedings in Applied Mathematics and Mechanics. Vol. 15(1), pp. 467-468. WILEY-VCH Verlag.
BibTeX:
@article{SchBalBraSch:2015:sos,
  author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {Study on statistically similar RVEs for real microstructures based on different statistical descriptors},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  publisher = {WILEY-VCH Verlag},
  year = {2015},
  volume = {15},
  number = {1},
  pages = {467--468},
  url = {http://dx.doi.org/10.1002/pamm.201510224},
  doi = {https://doi.org/10.1002/pamm.201510224}
}
Balzani, D., Scheunemann, L., Brands, D. & Schröder, J. (2014), "Construction of Two- and Three-Dimensional Statistically Similar RVEs for Coupled Micro-Macro Simulations", Computational Mechanics. Vol. 54, pp. 1269-1284.
BibTeX:
@article{BalSchBraSch:2014:cot,
  author = {D. Balzani and L. Scheunemann and D. Brands and J. Schröder},
  title = {Construction of Two- and Three-Dimensional Statistically Similar RVEs for Coupled Micro-Macro Simulations},
  journal = {Computational Mechanics},
  year = {2014},
  volume = {54},
  pages = {1269--1284}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2014), "Comparison of Statistical Descriptors for the Construction of Statistically Similar RVEs", Proceedings in Applied Mathematics and Mechanics. Vol. 14, pp. 539-540.
BibTeX:
@article{SchBraBalSch:2014:cos,
  author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {Comparison of Statistical Descriptors for the Construction of Statistically Similar RVEs},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2014},
  volume = {14},
  pages = {539--540}
}
Scheunemann, L., Brands, D., Balzani, D. & Schröder, J. (2014), "Comparative Study for the Efficient Construction of Statistically Similar RVEs: Lineal-Path and Minkowski Functionals", In Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI).
BibTeX:
@inproceedings{SchBraBalSch:2014:csf,
  author = {L. Scheunemann and D. Brands and D. Balzani and J. Schröder},
  title = {Comparative Study for the Efficient Construction of Statistically Similar RVEs: Lineal-Path and Minkowski Functionals},
  booktitle = {Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI)},
  year = {2014}
}
Scheunemann, L., Schröder, J., Balzani, D. & Brands, D. (2014), "Construction of statistically similar representative volume elements - comparative study regarding different statistical descriptors", Procedia Engineering. Vol. 81, pp. 1360-1365.
BibTeX:
@article{SchSchBalBra:2014:cos,
  author = {L. Scheunemann and J. Schröder and D. Balzani and D. Brands},
  title = {Construction of statistically similar representative volume elements - comparative study regarding different statistical descriptors},
  journal = {Procedia Engineering},
  year = {2014},
  volume = {81},
  pages = {1360-1365}
}
Balzani, D., Scheunemann, L., Brands, D. & Schröder, J. (2013), "Construction of 3D statistically similar RVEs for dual-phase steel microstructures", In XII International Conference on Computational Plasticity. Fundamentals and Applications. Barcelona, Spain. September 3--5 2013.
BibTeX:
@inproceedings{BalSchBraSch:2013:cos,
  author = {D. Balzani and L. Scheunemann and D. Brands and J. Schröder},
  title = {Construction of 3D statistically similar RVEs for dual-phase steel microstructures},
  booktitle = {XII International Conference on Computational Plasticity. Fundamentals and Applications},
  year = {2013}
}
Balzani, D., Schröder, J., Brands, D. & Scheunemann, L. (2013), "Simulation of dual phase steels based on three-dimensionalsional statistically similar RVEs", In Proceedings of the 19th International Symposium on Plasticity and its Current Applications. Nassau, Bahamas. January 3--8 2013.
BibTeX:
@inproceedings{BalSchBraSch:2013:sod,
  author = {D. Balzani and J. Schröder and D. Brands and L. Scheunemann},
  title = {Simulation of dual phase steels based on three-dimensionalsional statistically similar RVEs},
  booktitle = {Proceedings of the 19th International Symposium on Plasticity and its Current Applications},
  year = {2013}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2013), "Designing Statistically Similar RVEs for 3D Dual Phase Steel Microstructures", Proceedings in Applied Mathematics and Mechanics. Vol. 13(1), pp. 271-272.
BibTeX:
@article{SchBalBraSch:2013:dss,
  author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {Designing Statistically Similar RVEs for 3D Dual Phase Steel Microstructures},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2013},
  volume = {13},
  number = {1},
  pages = {271--272}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2013), "A Comparison of Different Statistical Measures for the Construction of Statistically Similar RVEs for dual phase steel microstructures", In Proceedings of PLASTICITY'15: The 21th International Symposium on Plasticity and its Current Applications. Montego Bay, Jamaica. January 4--9 2013.
BibTeX:
@inproceedings{SchBalBraSch:2015:aco,
  author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {A Comparison of Different Statistical Measures for the Construction of Statistically Similar RVEs for dual phase steel microstructures},
  booktitle = {Proceedings of PLASTICITY'15: The 21th International Symposium on Plasticity and its Current Applications},
  year = {2013}
}
Scheunemann, L., Balzani, D., Brands, D., Schröder, J. & Raabe, D. (2013), "Statistically similar RVE construction based on 3D dual-phase steel microstructures", In Research and Applications in Structural Engineering, Mechanics & Computation. Cape Town, South Africa , pp. 411-416. CRC Press, Taylor & Francis Group, London.
BibTeX:
@incollection{SchBalBraSchRaa:2013:ssr,
  author = {L. Scheunemann and D. Balzani and D. Brands and J. Schröder and D. Raabe},
  title = {Statistically similar RVE construction based on 3D dual-phase steel microstructures},
  booktitle = {Research and Applications in Structural Engineering, Mechanics & Computation},
  publisher = {CRC Press, Taylor & Francis Group, London},
  year = {2013},
  pages = {411--416}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2012), "Construction of Statistically Similar RVEs for 3D Microstructures", Proceedings in Applied Mathematics and Mechanics. Vol. 12(1), pp. 429-430.
BibTeX:
@article{SchBalBraSch:2012:cos,
  author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {Construction of Statistically Similar RVEs for 3D Microstructures},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2012},
  volume = {12},
  number = {1},
  pages = {429--430}
}
Schröder, J., Balzani, D., Brands, D. & Scheunemann, L. (2012), "On the incorporation of microstructural information of two-phase steels in FE-Simulations of sheet metal forming", In Proccedings of the ``Forming Technology Forum 2012''. ETH Zurich, Switzerland. Juni 5-6, 2012.
BibTeX:
@inproceedings{SchBalBraSch:2012:oti,
  author = {J. Schröder and D. Balzani and D. Brands and L. Scheunemann},
  title = {On the incorporation of microstructural information of two-phase steels in FE-Simulations of sheet metal forming},
  booktitle = {Proccedings of the ``Forming Technology Forum 2012''},
  year = {2012}
}
Scheunemann, L. (2011), "Construction of 3D Statistically Similar Representative Volume Elements for the Simulation of Dual-Phase Steels"
BibTeX:
@article{Sch:2011:,
  author = {Scheunemann, L.},
  title = {Construction of 3D Statistically Similar Representative Volume Elements for the Simulation of Dual-Phase Steels},
  year = {2011}
}
Scheunemann, L. (2010), "Numerical Analysis of Random Two-Phase Composites under varying biaxial loading ratios"
BibTeX:
@article{Sch:2010:,
  author = {Scheunemann, L.},
  title = {Numerical Analysis of Random Two-Phase Composites under varying biaxial loading ratios},
  year = {2010}
}

Stand: 29.04.2019