Personensuche
Personensuche
Es wurde 1 Person gefunden.
Fakultät für Ingenieurwissenschaften
Anschrift
Lotharstraße 1
47057 Duisburg
47057 Duisburg
Raum
MA 222
Telefon
Webseite
Funktionen
-
Universitätsprofessor/in, Konstruktion der Hochleistungsmaschinen
Aktuelle Veranstaltungen
-
2023 SS
- Maschinenelemente 1
- Konstruieren mit Kunststoffen
- Kunststoffmaschinen und -verarbeitung: Extrusionstechnik
- Maschinenelemente 1
- Maschinenelemente 1
- Kunststoffmaschinen und -verarbeitung: Extrusionstechnik
- Fachtagung: Extrusion von Kunststoffen - Institut für Produkt Engineering Lehrstuhl Konstruktion und Kunststoffmaschinen
Vergangene Veranstaltungen (max. 10)
-
2022 WS
-
2022 SS
Die folgenden Publikationen sind in der Online-Universitätsbibliographie der Universität Duisburg-Essen verzeichnet. Weitere Informationen finden Sie gegebenenfalls auch auf den persönlichen Webseiten der Person.
-
Analysis of feature extraction algorithms for quality prediction using machine learning in injection moldingIn: Procedia CIRP Jg. 112 (2022) S. 590 - 595ISSN: 2212-8271Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Adaptive quality prediction in injection molding based on ensemble learningIn: Procedia CIRP Jg. 99 (2021) S. 301 - 306ISSN: 2212-8271Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Condition monitoring of non-return valves in injection molding machines using available process and machine data
35th International Conference of the Polymer Processing Society, PPS 2019; Cesme-Izmir; Turkey; 26 - 30 May 2019,In: AIP Conference Proceedings Jg. 2205 (2020) S. 020054ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/ (Open Access) -
Neuartige Werkzeuggeometrien für die Blasfolienextrusion unter Verwendung additiver FertigungstechnikIn: Zeitschrift Kunststofftechnik Jg. 2020 (2020) Nr. 3, S. 81 - 107ISSN: 1864-2217
-
Integration zeitabhängiger Materialmodelle in CFD-Simulationen von ExtrusionswerkzeugenIn: Zeitschrift Kunststofftechnik (2019) Nr. 4, S. 288 - 313ISSN: 1864-2217
-
Leistungssteigerung in der High-Speed-ExtrusionIn: Zeitschrift Kunststofftechnik Jg. 15 (2019) Nr. 3, S. 245 - 270ISSN: 1864-2217
-
Anomaly detection in injection molding process data based on unsupervised learningIn: Zeitschrift Kunststofftechnik Jg. 14 (2018) Nr. 5, S. 301 - 347ISSN: 1864-2217Online Volltext: dx.doi.org/
-
Methodik zur simulation von wandnahen strömungen am beispiel eines farbwechsel-prozessesIn: Zeitschrift Kunststofftechnik Jg. 14 (2018) Nr. 5, S. 279 - 300ISSN: 1864-2217Online Volltext: dx.doi.org/ (Open Access)
-
Virtuelle Lebensdauerprognose für Elastomerbauteile basierend auf nichtlinearer Schadensakkumulation in Finite Elemente SimulationenIn: Kupplungen und Kupplungssysteme in Antrieben 2019: Auslegung – Systemverhalten – Lösungen / VDI-Fachtagung; Ettlingen bei Karlsruhe; 26. und 27. März 2019 (2019) S. 301 - XIISBN: 978-3-18-092341-3; 978-3-18-102341-9Online Volltext: dx.doi.org/
-
Automated optimization of a block-head-mixer with an innovative algorithmIn: ANTEC 2022: Conference Proceedings of the 2022 SPE Annual Technical Conference / ANTEC 2022 ; June 14-16, 2022, Charlotte, NC, USA / Society of Plastics Engineers (Hrsg.) 2022
-
Graphite filled thermoplastics for thermally conductive pipesIn: Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability: Vol. 1 / ECCM 2022, 20th European Conference on Composite Materials: Composites Meet Sustainability, 26-30 June, 2022, Lausanne, Switzerland / Vassilopoulos, Anastasios (Hrsg.) 2022, S. 917 - 924ISBN: 9782970161400(Open Access)
-
Product-Related Process Data Acquisition in Blown Film ExtrusionIn: ANTEC 2021: Conference Proceedings of the 2021 SPE Annual Technical Conference / ANTEC 2021, The Annnual Technical Conference for Plastic Professionals, 10-21 May 2021, online / Society of Plastics Engineers (SPE) (Hrsg.) 2022, S. 337 - 341ISBN: 978-1-7138-3075-7Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Production of flexible thermally conductive thermoplastic pipes by orientation of filler particlesIn: ANTEC 2022: Conference Proceedings of the 2022 SPE Annual Technical Conference / ANTEC 2022 ; June 14-16, 2022, Charlotte, NC, USA / Society of Plastics Engineers (Hrsg.) 2022
-
Quality Prediction In Injection Molding Based On Thermal Images With Convolutional Neural NetworksIn: ANTEC 2022: Conference Proceedings of the 2022 SPE Annual Technical Conference / ANTEC 2022 ; June 14-16, 2022, Charlotte, NC, USA / Society of Plastics Engineers (Hrsg.) 2022
-
Influence of Injection Molding Parameters on the Surface Structure of Polyamide PartsIn: ANTEC 2021: Conference Proceedings of the 2021 SPE Annual Technical Conference / ANTEC 2021, The Annnual Technical Conference for Plastic Professionals, 10-21 May 2021, online / Society of Plastics Engineers (SPE) (Hrsg.) 2021, S. 505 - 509ISBN: 978-1-7138-3075-7Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Operating performance of free-rotating mixing sleeves in single-screw extrusionIn: SPE ANTEC 2021: the Annnual Technical Conference for Plastic Professionals / SPE ANTEC 2021; 10-21 May 2021; online / Society of Plastics Engineers (Hrsg.) 2021ISBN: 978-1-71383-075-7
-
A Holistic Approach to Part Quality Prediction in Injection Molding Based on Machine LearningIn: Advances in polymer processing 2020: proceedings of the International Symposium on Plastics Technology / International Symposium on Plastics Technology, 08.09.2020, Aachen / Hopmann, Christian; Dahlmann, Rainer (Hrsg.) 2020, S. 137 - 149ISBN: 978-3-662-60809-8; 978-3-662-60808-1; 978-3-662-60811-1Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
An experimental study on process-oriented scale-up / scale-down in blown film extrusionIn: Proceedings of PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society / PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society, 18–22 November 2019, Pretoria, South Africa / Ray, Suprakas Sinha (Hrsg.) 2020, S. 020014ISBN: 978-0-7354-4019-7 ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Comparison of feature selection methods for machine learning based injection molding quality predictionIn: Proceedings of PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society / PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society, 18–22 November 2019, Pretoria, South Africa / Ray, Suprakas Sinha (Hrsg.) 2020, S. 020052ISBN: 978-0-7354-4019-7 ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Condition monitoring for injection molding screwsIn: Proceedings of PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society / PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society, 18–22 November 2019, Pretoria, South Africa / Ray, Suprakas Sinha (Hrsg.) 2020, S. 020023ISBN: 978-0-7354-4019-7 ISSN: 1551-7616; 0094-243XOnline Volltext: dx.doi.org/
-
Experimental wear data acquisition for condition monitoring in injection molding machinesIn: Annual Technical Conference - ANTEC, Conference Proceedings: Vol. 2 / SPE ANTEC 2020: Annual Technical Conference for Plastic Professionals, Virtual, Online, 30 March 2020 - 5 May 2020 2020, S. 543 - 548ISBN: 9781713821182
-
Validation of the virtual lifetime prediction method for elastomer componentsIn: SPE ANTEC 2020: the Annual Technical Conference for Plastic Professionals: Vol. 2 / SPE ANTEC 2020: Annual Technical Conference for Plastic Professionals, Virtual, Online, 30 March 2020 - 5 May 2020 2020, S. 1173 - 1178ISBN: 9781713821182
-
Anomaly detection in injection molding process data using cluster analysisIn: Annual Technical Conference - ANTEC: Conference Proceedings / 77th Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2019; Detroit; United States; 18 - 21 March 2019 2019
-
Modeling for damage accumulation of injection molding machine components using production planning data for predictive maintenanceIn: Annual Technical Conference - ANTEC: Conference Proceedings / 77th Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2019; Detroit; United States; 18 - 21 March 2019 2019
-
Two concepts for extending the 3D-simulation technique of melting processes in high-speed-extrusion based on a custom material modelIn: Annual Technical Conference - ANTEC: Conference Proceedings / 77th Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2019, Detroit, United States, 18 - 21 March 2019 2019
-
Using 3D injection molding simulation to explain emerging two- and three-dimensional surface structures of ABS and PC/ABS parts within the process of electroplating on plasticsIn: AIP Conference Proceedings / 34th International Conference of the Polymer Processing Society, PPS 2018; Taipei; Taiwan; 21 - 25 May 2018 2019, S. 030002ISBN: 9780735417939Online Volltext: dx.doi.org/
-
Using secondary air cooling in blown film extrusion : Concept design and experimental studyIn: Annual Technical Conference - ANTEC: Conference Proceedings / 77th Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2019; Detroit; United States; 18 - 21 March 2019 2019, S. 1000 - 1004ISBN: 978-1-7138-0198-6Online Volltext: dx.doi.org/ Online Volltext (Open Access)
-
Virtual lifetime prediction : Nonlinear damage accumulation for elastomer components in finite-element simulationsIn: Proceedings of PPS-34 / 34th International Conference of the Polymer Processing Society, PPS 2018; Taipei; Taiwan; 21 - 25 May 2018 2019, S. 030014ISBN: 978-0-7354-1793-9Online Volltext: dx.doi.org/
-
3D surface characterization of etched, injection molded parts before a follow up electroplating processIn: ANTEC 2018: Conference Proceedings / 2018 Society of Plastics Engineers Annual Technical Conference, Orange County Convention CenterOrlando; United States, 7 May 2018 through 10 May 2018 2018
-
Automatic anomaly detection and root cause analysis for holistic process monitoring and control in injection moldingIn: Annual Technical Conference - ANTEC: Conference Proceedings / ANTEC 2018; Orlando; United States; 7 - 10 May 2018 Jg. May 2018
-
Kunststoffmaschinen und-peripherie 4.0 : Status und AusblickIn: Kunststoffe in der Medizintechnik / VDI Wissensforum GmbH (Hrsg.) 2018, S. 19 - 28ISBN: 978-3-18-244352-0; 978-3-18-234352-3Online Volltext: dx.doi.org/
-
Stabilization of BMC injection molding by process control measuresIn: 2018 Society of Plastics Engineers Annual Technical Conference, ANTEC 2018: Conference Proceedings: Vol. 4 / Annual Technical Conference - ANTEC ; 7 - 10 May 2018, Orlando, Florida 2018, S. 3155 - 3161
-
Wissensbasiertes Unterstützungswerkzeug zur virtuellen LebensdauerprognoseIn: Tagungsband: 20. Bayreuther 3D-Konstrukteurstag am 20. September 2018 / 20. Bayreuther 3D-Konstrukteurstag, K-TAG, 20. September 2018, Bayreuth / Rieg, Frank; Hackenschmidt, Reinhard (Hrsg.) 2018ISBN: 978-3-00-059461-8