Dr.-Ing. Dominik Brands

Tel.: +49(0)201/183-2701
Fax: +49(0)201/183-2680
Room: R12 S02 H17
dominik.brands@uni-due.de

Universität Duisburg-Essen

Fakultät für Ingenieurwissenschaften
Abteilung Bauwissenschaften
Institut für Mechanik
Universitätsstraße 15
Raum
R12 S02 H17
45141 Essen

Research

Focus

  • Simulation of deformations of arterial walls
  • Reconstruction of patient-specific arterial geometries
  • Multiscale modelling of residual stresses in steels
  • Numerical analysis of failure of high performace concrete
  • Construction of Statistically Similar Representative Volume Elements (SSRVE)
  • Coupled micro-macro FE simulations (FE²) applied to multiphase steels

actual Projects

  • "Erfassung und Modellierung des Einflusses von Stahlfasern auf die Schädigungsentwicklung von Hochleistungsbetonen unter Ermüdungsbeanspruchung" (Projekt im Rahmen des DFG Schwerpunktprogramms 2020 "Zyklische Schädigungsprozesse in Hochleistungsbetonen im Experimental-Virtual-Lab") SPP2020
  • "Experimentelle sowie numerische Modellierung und Analyse mikrostruktureller Eigenspannungen von warmmassivumgeformten Bauteilen mit gezielter Abkühlung" (Projekt im Rahmen des DFG Schwerpunktprogramms 2013 "Gezielte Nutzung umformtechnisch induzierter Eigenspannungen in metallischen Bauteilen") SPP2013
  • "Design und Analyse funktioneller Komposit-Materialien mit verzerrungs-induzierter magneto-elektrischer Kopplung" (Projekt im Rahmen der DFG Forschergruppe 1509 “Ferroische Funktionsmaterialien - Mehrskalige Modellierung und experimentelle Charakterisierung”) FOR1509

past Projects

  • "Massiv parallele Simulation von Arterienwänden: Kontinuumsmechanische Modellbildung und numerische Lösung mittels FETI-Gebietszerlegungsverfahren", DFG-Projekt
  • "Statistically similar representative microstructures in elasto-plasticity", Teilprojekt P8 im Rahmen der DFG-FG "Analysis and computation of microstructure in finite plasticity"

Teaching

Lectures

  • Berechnungsprogramme im Bauwesen,
  • Bauinformatik Teil 3 - Mechanik,
  • Coupled Problems,
  • Effective Properties of Micro- Hetergeneous Materials,
  • Technische Mechanik 3

Exercises

  • Introduction into nanomechanics and atomistic-based FEM
  • Computational Inelasticity

The material of the lectures/exercises is provided via the Moodle-Plattform (http://moodle2.uni-due.de/). Further informations are also given in the LSF (https://campus.uni-duisburg-essen.de).

Career

1999 High-school diploma (Abitur) at Theodor- Heuss- Gymnasium, Dinslaken
1999 bis 2000 Alternative national service
2000 bis 2006

Study of "Allgemeiner Maschinen- und Anlagenbau
Vertiefung Mechatronik" (Engineering majoring mechatronics), Universität Duisburg- Essen

2006-2013

Research assistant, Institute of Mechanics, Faculty of Engineering, Department Civil Engineering, University of Duisburg-Essen

09/2012

Doctoral degree (Dr.-Ing.),(title of dissertation: "Geometrical Modeling and Numerical Simulation of Heterogeneous Materials"; Reviewers: Jörg Schröder, Axel Klawonn, Wolfgang A. Wall

02/2013-11/2015

"Akademischer Rat", Institute of Mechanics, Department Civil Engineering, Faculty of Engineering, University Duisburg-Essen

since 04/2013 Board member of the "Center for Computational Sciences and Simulation" (CCSS), University Duisburg-Essen
since 01/2015 Research assistant of the Scientific Computing Support Team (HPC-Support Team) of the "Zentrum für Informations- und Mediendienste" (ZIM), University of Duisburg-Essen
since 11/2015 "Akademischer Oberrat", Institute of Mechanics, Department Civil Engineering, Faculty of Engineering, University Duisburg-Essen

 

Supervised thesis

  • Sarhil, M. (2018), Constitutive relations and homogenization assumptions in phase-field models with elasticity Martensite transformation as an example. Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
  • Uebing, S. (2018), Numerical simulation of metal heat treatment using fully coupled thermo-elasto-plasticity. Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
  • von Hoegen, M. (2015), Investigation and comparison of differentapproaches for the incorporation of residual strains and stresses in patient-specific arterial wall simulation. Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
  • Ashutuosh, G. (2014), Thermo-elasto-plasticity – Continuum Mechanical Formulation and Finite Element Implementation. Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
  • Misera, M.A. (2014), A MATLAB-based FE-remeshing tool for transformation of P1-elements to Pn-elements. Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
  • Scheunemann, L. (2011), Construction of 3D Statistically Similar Representative Volume Elements for the Simulation of Dual-Phase Steels". Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
  • Scheunemann, L. (2010), Numerical Analysis of Random Two-Phase Composites under varying biaxial loading ratios". Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen.
  • Tielke, A.-K. (2009), Sensitivity Analysis of Plaque Components within Arterial Wall Simulations based on Patient Specific Data". Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen und University of applied sciences, Fachhochschule Giessen Friedberg.
  • Werner, D. (2008), FE-discretization and 2D Simulation of Arterial Walls - based on a Virtual Histology Database". Institut für Mechanik, Fak. Ingenieurwissenschaften, Abt. Bauwissenschaften, Universität Duisburg-Essen, Report 45 (2008).

Publications

JabRef References output

QuickSearch:   Number of matching entries: 0.

Search Settings

Gebuhr, G., Pise, M., Sarhil, M., Anders, S., Brands, D. & Schröder, J. (submitted (2019)), "Analysis and evaluation of single fibre pull-out behaviour of hooked steel fibres embedded in high performance concrete for calibration of numerical models", Structural Concrete.
BibTeX:
@article{GebPisSarAndBraSch:2019:aae,
  author = {Gebuhr, G. and Pise, M. and Sarhil, M. and Anders, S. and Brands, D. and Schröder, J.},
  title = {Analysis and evaluation of single fibre pull-out behaviour of hooked steel fibres embedded in high performance concrete for calibration of numerical models},
  journal = {Structural Concrete},
  year = {submitted (2019)}
}
Gebuhr, G., Pise, M., Sarhil, M., Anders, S., Brands, D. & Schröder, J. (accepted (2019)), "Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modeling", FIB Proceedings.
BibTeX:
@article{GebPisSarAndBraSch:2019:daa,
  author = {Gebuhr, G. and Pise, M. and Sarhil, M. and Anders, S. and Brands, D. and Schröder, J.},
  title = {Description and analyses of pull-out behaviour of hooked steel fibres embedded in high performance concrete using phase-field modeling},
  journal = {FIB Proceedings},
  year = {accepted (2019)}
}
Behrens, B.-A., Schröder, J., Brands, D., Scheunemann, L., Niekamp, R., Chugreev, A., Sarhil, M., Uebing, S. & Kock, C. (2019), "Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505", Metals. Vol. 9(4), pp. 480 (28 pages).
BibTeX:
@article{BraChuKocNieSchUebBehSch:2019:ean,
  author = {Behrens, B.-A. and Schröder, J. and Brands, D. and Scheunemann, L. and Niekamp, R. and Chugreev, A. and Sarhil, M. and Uebing, S. and Kock, C.},
  title = {Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505},
  journal = {Metals},
  year = {2019},
  volume = {9},
  number = {4},
  pages = {480 (28 pages)}
}
Brands, D., Chugreev, A., Kock, C., Niekamp, R., Scheunemann, L., Uebing, S., Behrens, B.-A. & Schröder, J. (2018), "On the analysis of microstructural residual stresses in hot bulk forming parts under specific cooling", Proceedings in Applied Mathematics and Mechanics. , pp. #e201800256#.
BibTeX:
@article{BraChuKocNieSchUebBehSch:2018:ota,
  author = {Brands, D. and Chugreev, A. and Kock, C. and Niekamp, R. and Scheunemann, L. and Uebing, S. and Behrens, B.-A. and Schröder, J.},
  title = {On the analysis of microstructural residual stresses in hot bulk forming parts under specific cooling},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2018},
  pages = {#e201800256#}
}
Gandhi, A., Balzani, D., Brands, D., Scheunemann, L. & Schröder, Jö. (2018), "A Computational Two-Scale Model for the Simulation of Dual-Phase Steels under Cyclic Loading", Proceedings in Applied Mathematics and Mechanics. Vol. 18(1), pp. e201800321.
BibTeX:
@article{GanBalBraSchSch:2018:act,
  author = {Gandhi, Ashutosh and Balzani, Daniel and Brands, Dominik and Scheunemann, Lisa and Schröder, Jörg},
  title = {A Computational Two-Scale Model for the Simulation of Dual-Phase Steels under Cyclic Loading},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2018},
  volume = {18},
  number = {1},
  pages = {e201800321}
}
Niekamp, R., Brands, D., Götzen, C., Kiseleva, M., Niekamp, J., Schröder, Jö. & Siems, O. (2018), "A Stochastic Model for Strong Wind Events in Central Europe based on Historical Wind Data", Proceedings in Applied Mathematics and Mechanics. , pp. #e201800365#.
BibTeX:
@article{NieBraGoeKisNieSchSie:2018:asm,
  author = {Rainer Niekamp and Dominik Brands and Carina Götzen and Maria Kiseleva and Jana Niekamp and Jörg Schröder and Onnen Siems},
  title = {A Stochastic Model for Strong Wind Events in Central Europe based on Historical Wind Data},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2018},
  pages = {#e201800365#}
}
Pise, M., Brands, D., Gebuhr, G., Schröder, J. & Anders, S. (2018), "Analysis of pullout behavior of single steel fibers embedded in concrete using phase-field modeling", Proceedings in Applied Mathematics and Mechanics. , pp. #e201800401#.
BibTeX:
@article{PisBrGeSchAn:2018:aop,
  author = {M.~Pise and D.~Brands and G.~Gebuhr and J.~Schröder and S.~Anders},
  title = {Analysis of pullout behavior of single steel fibers embedded in concrete using phase-field modeling},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2018},
  pages = {#e201800401#}
}
Baron, T., Khlopkov, K., Pretorius, T., Balzani, D., Brands, D. & Schröder, J. (2016), "Modeling of Microstructure Evolution with Dynamic Recrystallization in Finite Element Simulations of Martensitic Steel", steel research international. Vol. 87(1), pp. 37-45.
BibTeX:
@article{BarKhlPreBalBraSch:2016:mom,
  author = {Baron, T.J. and Khlopkov, K. and Pretorius, T. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {Modeling of Microstructure Evolution with Dynamic Recrystallization in Finite Element Simulations of Martensitic Steel},
  journal = {steel research international},
  year = {2016},
  volume = {87},
  number = {1},
  pages = {37--45},
  url = {http://dx.doi.org/10.1002/srin.201400576},
  doi = {http://dx.doi.org/10.1002/srin.201400576}
}
Brands, D., Balzani, D., Scheunemann, L., Schröder, J., Richter, H. & Raabe, D. (2016), "Computational modeling of dual-phase steels based on representative three-dimensional microstructures obtained from EBSD data", Archive of Applied Mechanics. Vol. 86, pp. 575-598. Springer Berlin Heidelberg.
BibTeX:
@article{BraBalSchSchRicRaa:2016:cmo,
  author = {Brands, D. and Balzani, D. and Scheunemann, L. and Schröder, J. and Richter, H. and Raabe, D.},
  title = {Computational modeling of dual-phase steels based on representative three-dimensional microstructures obtained from EBSD data},
  journal = {Archive of Applied Mechanics},
  publisher = {Springer Berlin Heidelberg},
  year = {2016},
  volume = {86},
  pages = {575--598},
  url = {http://dx.doi.org/10.1007/s00419-015-1044-1},
  doi = {http://dx.doi.org/10.1007/s00419-015-1044-1}
}
Maike, S., Bluhm, J., Schröder, J., Brands, D. & Ricken, T. (2016), "Macroscopic characterization of porous unit cells within the framework of the theory of porous media", In Insights and Innovations in Structural Engineering, Mechanics and Computation. Cape Town, South Africa , pp. 400-406. CRC Press.
BibTeX:
@incollection{MaiBluSchBraRic:2016:mco,
  author = {Maike, S. and Bluhm, J. and Schröder, J. and Brands, D. and Ricken, T.},
  title = {Macroscopic characterization of porous unit cells within the framework of the theory of porous media},
  booktitle = {Insights and Innovations in Structural Engineering, Mechanics and Computation},
  publisher = {CRC Press},
  year = {2016},
  pages = {400--406}
}
Scheunemann, L., Schröder, J. & Brands, D. (2016), "Macroscopic yield curves based on statistically similar RVEs for 3D dual-phase steel microstructure", In Insights and Innovations in Structural Engineering, Mechanics & Computation. Cape Town, South Africa , pp. 433-438. CRC Press.
BibTeX:
@incollection{SchSchBra:2016:myc,
  author = {L. Scheunemann and J. Schröder and D. Brands},
  title = {Macroscopic yield curves based on statistically similar RVEs for 3D dual-phase steel microstructure},
  booktitle = {Insights and Innovations in Structural Engineering, Mechanics & Computation},
  publisher = {CRC Press},
  year = {2016},
  pages = {433--438}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "Design of 3D Statistically Similar Representative Volume Elements based on Minkowski Functionals", Mechanics of Materials. Vol. 90, pp. 185-201.
BibTeX:
@article{SchBalBraSch:2014:do3,
  author = {L. Scheunemann and D. Balzani and D. Brands and J. Schröder},
  title = {Design of 3D Statistically Similar Representative Volume Elements based on Minkowski Functionals},
  journal = {Mechanics of Materials},
  year = {2015},
  volume = {90},
  pages = {185--201},
  url = {http://dx.doi.org/10.1016/j.mechmat.2015.03.005},
  doi = {http://dx.doi.org/10.1016-j.mechmat.2015.03.005}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "A Comparison of Different Statistical Measures for the Construction of Statistically Similar RVEs for dual phase steel microstructures", In Proceedings of PLASTICITY'15: The 21th International Symposium on Plasticity and its Current Applications. Montego Bay, Jamaica. January 4-9 2015.
BibTeX:
@inproceedings{SchBalBraSch:2015:aco,
  author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {A Comparison of Different Statistical Measures for the Construction of Statistically Similar RVEs for dual phase steel microstructures},
  booktitle = {Proceedings of PLASTICITY'15: The 21th International Symposium on Plasticity and its Current Applications},
  year = {2015}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "Construction of Statistically Similar RVEs", In Analysis and Computation of Microstructure in Finite Plasticity. Lecture Notes in Applied and Computational Mechanics (78). Springer.
BibTeX:
@incollection{SchBalBraSch:2015:cos,
  author = {L. Scheunemann and D. Balzani and D. Brands and J. Schröder},
  title = {Construction of Statistically Similar RVEs},
  booktitle = {Analysis and Computation of Microstructure in Finite Plasticity. Lecture Notes in Applied and Computational Mechanics (78)},
  publisher = {Springer},
  year = {2015}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2015), "Study on statistically similar RVEs for real microstructures based on different statistical descriptors", Proceedings in Applied Mathematics and Mechanics. Vol. 15(1), pp. 467-468. WILEY-VCH Verlag.
BibTeX:
@article{SchBalBraSch:2015:sos,
  author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {Study on statistically similar RVEs for real microstructures based on different statistical descriptors},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  publisher = {WILEY-VCH Verlag},
  year = {2015},
  volume = {15},
  number = {1},
  pages = {467--468},
  url = {http://dx.doi.org/10.1002/pamm.201510224},
  doi = {http://dx.doi.org/10.1002/pamm.201510224}
}
Schröder, J., Labusch, M., Keip, M.-A., Kiefer, B., Brands, D. & Lupascu., D. (2015), "Computation of non-linear magneto-electric product properties of 0-3 composites", GAMM-Mitteilungen. Vol. 38, pp. 8-24.
BibTeX:
@article{SchLabKeiKieBraLup:2015:con,
  author = {J. Schröder and M. Labusch and M.-A. Keip and B. Kiefer and D. Brands and D.C. Lupascu.},
  title = {Computation of non-linear magneto-electric product properties of 0-3 composites},
  journal = {GAMM-Mitteilungen},
  year = {2015},
  volume = {38},
  pages = {8--24}
}
Balzani, D., Brands, D. & Schröder, J. (2014), "Construction of Statistically Similar Representative Volume Elements", In Plasticity and Beyond, CISM Lecture Notes 550. , pp. 355-400. Springer.
BibTeX:
@incollection{BalBraSch:2014:cos,
  author = {Balzani, D. and Brands, D. and Schröder, J.},
  title = {Construction of Statistically Similar Representative Volume Elements},
  booktitle = {Plasticity and Beyond, CISM Lecture Notes 550},
  publisher = {Springer},
  year = {2014},
  pages = {355--400}
}
Balzani, D., Scheunemann, L., Brands, D. & Schröder, J. (2014), "Construction of Two- and Three-Dimensional Statistically Similar RVEs for Coupled Micro-Macro Simulations", Computational Mechanics. Vol. 54, pp. 1269-1284.
BibTeX:
@article{BalSchBraSch:2014:cot,
  author = {D. Balzani and L. Scheunemann and D. Brands and J. Schröder},
  title = {Construction of Two- and Three-Dimensional Statistically Similar RVEs for Coupled Micro-Macro Simulations},
  journal = {Computational Mechanics},
  year = {2014},
  volume = {54},
  pages = {1269--1284}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2014), "Comparison of Statistical Descriptors for the Construction of Statistically Similar RVEs", Proceedings in Applied Mathematics and Mechanics. Vol. submitted
BibTeX:
@article{SchBraBalSch:2014:cos,
  author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {Comparison of Statistical Descriptors for the Construction of Statistically Similar RVEs},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2014},
  volume = {submitted}
}
Scheunemann, L., Brands, D., Balzani, D. & Schröder, J. (2014), "Comparative Study for the Efficient Construction of Statistically Similar RVEs: Lineal-Path and Minkowski Functionals", In Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI).
BibTeX:
@inproceedings{SchBraBalSch:2014:csf,
  author = {L. Scheunemann and D. Brands and D. Balzani and J. Schröder},
  title = {Comparative Study for the Efficient Construction of Statistically Similar RVEs: Lineal-Path and Minkowski Functionals},
  booktitle = {Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI)},
  year = {2014}
}
Schröder, J., Brinkhues, S., Brands, D. & von Hoegen, M. (2014), "Simulation of arterial walls under condsideration of residual stresses - A numerical approach", Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI).
BibTeX:
@article{SchBriBraHoe:2014:soa,
  author = {J.~Schröder and S.~Brinkhues and D.~Brands and M.~von~Hoegen},
  title = {Simulation of arterial walls under condsideration of residual stresses - A numerical approach},
  journal = {Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI)},
  year = {2014}
}
Scheunemann, L., Schröder, J., Balzani, D. & Brands, D. (2014), "Construction of statistically similar representative volume elements - comparative study regarding different statistical descriptors", Procedia Engineering. Vol. 81, pp. 1360-1365.
BibTeX:
@article{SchSchBalBra:2014:cos,
  author = {L. Scheunemann and J. Schröder and D. Balzani and D. Brands},
  title = {Construction of statistically similar representative volume elements - comparative study regarding different statistical descriptors},
  journal = {Procedia Engineering},
  year = {2014},
  volume = {81},
  pages = {1360-1365}
}
Balzani, D., Scheunemann, L., Brands, D. & Schröder, J. (2013), "Construction of 3D statistically similar RVEs for dual-phase steel microstructures", In XII International Conference on Computational Plasticity. Fundamentals and Applications. Barcelona, Spain. September 3-5 2013.
BibTeX:
@inproceedings{BalSchBraSch:2013:cos,
  author = {D. Balzani and L. Scheunemann and D. Brands and J. Schröder},
  title = {Construction of 3D statistically similar RVEs for dual-phase steel microstructures},
  booktitle = {XII International Conference on Computational Plasticity. Fundamentals and Applications},
  year = {2013}
}
Balzani, D., Schröder, J., Brands, D. & Scheunemann, L. (2013), "Simulation of dual phase steels based on three-dimensional statistically similar RVEs", In Proceedings of the 19th International Symposium on Plasticity and its Current Applications. Nassau, Bahamas. January 3-8 2013.
BibTeX:
@inproceedings{BalSchBraSch:2013:sod,
  author = {D. Balzani and J. Schröder and D. Brands and L. Scheunemann},
  title = {Simulation of dual phase steels based on three-dimensional statistically similar RVEs},
  booktitle = {Proceedings of the 19th International Symposium on Plasticity and its Current Applications},
  year = {2013}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2013), "Designing Statistically Similar RVEs for 3D Dual Phase Steel Microstructures", Proceedings in Applied Mathematics and Mechanics. Vol. 13, pp. 271-272.
BibTeX:
@article{SchBalBraSch:2013:dss,
  author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {Designing Statistically Similar RVEs for 3D Dual Phase Steel Microstructures},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2013},
  volume = {13},
  pages = {271--272}
}
Scheunemann, L., Balzani, D., Brands, D., Schröeder, J. & Raabe, D. (2013), "Statistically similar RVE construction based on 3D dual-phase steel microstructures", In Research and Applications in Structural Engineering, Mechanics & Computation. Cape Town, South Africa , pp. 411-416. CRC Press, Taylor & Francis Group, London.
BibTeX:
@incollection{SchBalBraSchRaa:2013:ssr,
  author = {L. Scheunemann and D. Balzani and D. Brands and J. Schröeder and D. Raabe},
  title = {Statistically similar RVE construction based on 3D dual-phase steel microstructures},
  booktitle = {Research and Applications in Structural Engineering, Mechanics & Computation},
  publisher = {CRC Press, Taylor & Francis Group, London},
  year = {2013},
  pages = {411--416}
}
Balzani, D., Böse, D., Brands, D., Erbel, R., Klawonn, A., Rheinbach, O. & Schröder, J. (2012), "Parallel Simulation of Patient-specific Atherosclerotic Arteries for the Enhancement of Intravascular Ultrasound Diagnostics", Engineering Computations. Vol. 29(8), pp. 888-906.
BibTeX:
@article{BalBoeBraErbKlaRheSch:2010:pso,
  author = {Balzani, D. and Böse, D. and Brands, D. and Erbel, R. and Klawonn, A. and Rheinbach, O. and Schröder, J.},
  title = {Parallel Simulation of Patient-specific Atherosclerotic Arteries for the Enhancement of Intravascular Ultrasound Diagnostics},
  journal = {Engineering Computations},
  year = {2012},
  volume = {29},
  number = {8},
  pages = {888--906}
}
Balzani, D., Schröder, J. & Brands, D. (2012), "Construction of Statistically Similar Representative Volume Elements for Dual Phase Steels", In Proceedings of the 18th International Symposium on Plasticity and its Current Applications, San Juan, Puerto Rico. Januar 3-8 2012.
BibTeX:
@inproceedings{BalSchBra:2012:cos,
  author = {Balzani, D. and Schröder, J. and Brands, D.},
  title = {Construction of Statistically Similar Representative Volume Elements for Dual Phase Steels},
  booktitle = {Proceedings of the 18th International Symposium on Plasticity and its Current Applications, San Juan, Puerto Rico},
  year = {2012}
}
Brands, D. (2012), "Geometrical Modeling and Numerical Simulation of Heterogeneous Materials". School: Universität Duisburg-Essen.
BibTeX:
@phdthesis{Bra:2012:,
  author = {Brands, D.},
  title = {Geometrical Modeling and Numerical Simulation of Heterogeneous Materials},
  school = {Universität Duisburg-Essen},
  year = {2012},
  note = {Report No. 10 (2012) of the Institut für Mechanik, Universität Duisburg-Essen}
}
Scheunemann, L., Balzani, D., Brands, D. & Schröder, J. (2012), "Construction of Statistically Similar RVEs for 3D Microstructures", Proceedings of Applied Mathematics and Mechanics. Vol. 12(1), pp. 429-430.
BibTeX:
@article{SchBalBraSch:2012:cos,
  author = {Scheunemann, L. and Balzani, D. and Brands, D. and Schröder, J.},
  title = {Construction of Statistically Similar RVEs for 3D Microstructures},
  journal = {Proceedings of Applied Mathematics and Mechanics},
  year = {2012},
  volume = {12},
  number = {1},
  pages = {429--430}
}
Schröder, J., Balzani, D., Brands, D. & Scheunemann, L. (2012), "On the incorporation of microstructural information of two-phase steels in FE-Simulations of sheet metal forming", In Proceedings of the ``Forming Technology Forum 2012''. ETH Zurich, Switzerland. Juni 5-6, 2012.
BibTeX:
@inproceedings{SchBalBraSch:2012:oti,
  author = {J. Schröder and D. Balzani and D. Brands and L. Scheunemann},
  title = {On the incorporation of microstructural information of two-phase steels in FE-Simulations of sheet metal forming},
  booktitle = {Proceedings of the ``Forming Technology Forum 2012''},
  year = {2012}
}
Schröder, J., Eidel, B., Brands, D. & Balzani, D. (2012), "Nano to Micro - Perspectives for Homogenization in Crystalline Solids", Proceedings of Applied Mathematics and Mechanics. Vol. 12, pp. 19-22.
BibTeX:
@article{SchEidBraBal:2012:ntm,
  author = {Schröder, J. and Eidel, B. and Brands, D. and Balzani, D.},
  title = {Nano to Micro - Perspectives for Homogenization in Crystalline Solids},
  journal = {Proceedings of Applied Mathematics and Mechanics},
  year = {2012},
  volume = {12},
  pages = {19--22}
}
Balzani, D., Schröder, J. & Brands, D. (2011), "Simulation of Two-Phase Steels based on Statistically Similar Representative Volume Elements", Proceedings in Applied Mathematics and Mechanics. Vol. 11, pp. 939-942.
BibTeX:
@article{BalSchBra:2011:sot,
  author = {D. Balzani and J. Schröder and D. Brands},
  title = {Simulation of Two-Phase Steels based on Statistically Similar Representative Volume Elements},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2011},
  volume = {11},
  pages = {939--942}
}
Balzani, D., Schröder, J. & Brands, D. (2011), "Statistically Similar RVEs for the Simulation of Two-Phase Steels based on Lineal-Path Functions", In Proceedings of the 2nd African Conference on Computational Mechanics (AfriCOMP11).
BibTeX:
@inproceedings{BalSchBra:2011:ssr,
  author = {D. Balzani and J. Schröder and D. Brands},
  title = {Statistically Similar RVEs for the Simulation of Two-Phase Steels based on Lineal-Path Functions},
  booktitle = {Proceedings of the 2nd African Conference on Computational Mechanics (AfriCOMP11)},
  year = {2011}
}
Brands, D., Balzani, D., Schröder, J. & Raabe, D. (2011), "Simulation of DP-steels based on statistically similar Representative volume elements and 3D EBSD Data", In Computational Plasticity XI - Fundamentals and Applications. Barcelona, Spain. September 7-9 2011., pp. 1552-1563.
BibTeX:
@inproceedings{BraBalSchRaa:2011:sod,
  author = {D. Brands and D. Balzani and J. Schröder and D. Raabe},
  title = {Simulation of DP-steels based on statistically similar Representative volume elements and 3D EBSD Data},
  booktitle = {Computational Plasticity XI - Fundamentals and Applications},
  year = {2011},
  pages = {1552--1563}
}
Brands, D., Schröder, J. & Balzani, D. (2011), "On the Incorporation of Microstructural Information in Dual Phase Steel Simulations", In Proccedings of the 10th International Conference of Technology of Plasticity, ICTP 2011. Aachen. September, 25-30 2011.
BibTeX:
@inproceedings{BraSchBal:2011:oti,
  author = {D. Brands and J. Schröder and D. Balzani},
  title = {On the Incorporation of Microstructural Information in Dual Phase Steel Simulations},
  booktitle = {Proccedings of the 10th International Conference of Technology of Plasticity, ICTP 2011},
  year = {2011}
}
Brands, D., Schröder, J. & Balzani, D. (2011), "Statistically Similar Reconstruction of Dual-Phase Steel Microstructures for Engineering Applications", In Proceedings of the 19th International Conference on Computer Methods in Mechanics, CMM 2011. Warschau, Polen. Mai, 9-12 2011.
BibTeX:
@inproceedings{BraSchBal:2011:ssr,
  author = {D. Brands and J. Schröder and D. Balzani},
  title = {Statistically Similar Reconstruction of Dual-Phase Steel Microstructures for Engineering Applications},
  booktitle = {Proceedings of the 19th International Conference on Computer Methods in Mechanics, CMM 2011},
  year = {2011}
}
Brands, D., Schröder, J., Balzani, D., Dmitrieva, O. & Raabe, D. (2011), "On the Reconstruction and Computation of Dual-Phase Steel Microstructures Based on 3D EBSD Data", Proceedings in Applied Mathematics and Mechanics. Vol. 11, pp. 503-504.
BibTeX:
@article{BraSchBalDmiRaa:2011:otr,
  author = {D. Brands and J. Schröder and D. Balzani and O. Dmitrieva and D. Raabe},
  title = {On the Reconstruction and Computation of Dual-Phase Steel Microstructures Based on 3D EBSD Data},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2011},
  volume = {11},
  pages = {503--504}
}
Schröder, J., Balzani, D. & Brands, D. (2011), "Approximation of Random Microstructures by Periodic Statistically Similar Representative Volume Elements based on Lineal-Path Functions.", Archive of Applied Mechanics. Vol. 81(7), pp. 975-997.
BibTeX:
@article{SchBalBra:2011:aor,
  author = {Schröder, J. and Balzani, D. and Brands, D.},
  title = {Approximation of Random Microstructures by Periodic Statistically Similar Representative Volume Elements based on Lineal-Path Functions.},
  journal = {Archive of Applied Mechanics},
  year = {2011},
  volume = {81},
  number = {7},
  pages = {975--997}
}
Schröder, J., Balzani, D. & Brands, D. (2011), "Efficient FE$^2$-Simulations using Statistically Similar RVEs", In Proceedings of the International Symposium on Plasticity 2011. Puerto Vallarta, Mexiko. Januar, 3-8 2011.
BibTeX:
@inproceedings{SchBalBra:2011:efs,
  author = {J. Schröder and D. Balzani and D. Brands},
  title = {Efficient FE$^2$-Simulations using Statistically Similar RVEs},
  booktitle = {Proceedings of the International Symposium on Plasticity 2011},
  year = {2011}
}
Balzani, D., Brands, D., Klawonn, A., Rheinbach, O. & Schröder, J. (2010), "On the mechanical modeling of anisotropic biological soft tissue and iterative parallel solution strategies", Archive of Applied Mechanics. Vol. 80, pp. 479-488.
BibTeX:
@article{BalBraKlaRheSch:2010:otm,
  author = {D. Balzani and D. Brands and A. Klawonn and O. Rheinbach and J. Schröder},
  title = {On the mechanical modeling of anisotropic biological soft tissue and iterative parallel solution strategies},
  journal = {Archive of Applied Mechanics},
  year = {2010},
  volume = {80},
  pages = {479--488}
}
Balzani, D., Brands, D. & Schröder, J. (2010), "Construction of Statistically Similar Representative Volume Elements for FE$^2$-Simulations based on the Lineal-Path Function", In Proceedings of the 4th European Conference on Computational Mechanics (ECCM).
BibTeX:
@inproceedings{BalBraSch:2010:cos,
  author = {Balzani, D. and Brands, D. and Schröder, J.},
  title = {Construction of Statistically Similar Representative Volume Elements for FE$^2$-Simulations based on the Lineal-Path Function},
  booktitle = {Proceedings of the 4th European Conference on Computational Mechanics (ECCM)},
  year = {2010}
}
Balzani, D., Schröder, J. & Brands, D. (2010), "FE$^2$-simulation of micro-heterogeneous steels based on statistically similar RVE's", In IUTAM-Symposium on Variational Concepts with Applications to the Mechanics of Materials. Volume 21
BibTeX:
@inproceedings{BalSchBra:2010:fso,
  author = {D. Balzani and J. Schröder and D. Brands},
  title = {FE$^2$-simulation of micro-heterogeneous steels based on statistically similar RVE's},
  booktitle = {IUTAM-Symposium on Variational Concepts with Applications to the Mechanics of Materials},
  year = {2010},
  volume = {21}
}
Brands, D., Balzani, D. & Schröder, J. (2010), "On the FE$^2$-Simulation using Statistically Similar
Representative Volume Elements based on the Lineal-Path Function"
, Proceedings in Applied Mathematics and Mechanics. Vol. 10, pp. 399-400.
BibTeX:
@article{BalSchBra:2010:otf,
  author = {D. Brands and D. Balzani and J. Schröder},
  title = {On the FE$^2$-Simulation using Statistically Similar
Representative Volume Elements based on the Lineal-Path Function}, journal = {Proceedings in Applied Mathematics and Mechanics}, year = {2010}, volume = {10}, pages = {399--400} }
Balzani, D., Schröder, J. & Brands, D. (2010), "Statistically Similar Representative Volume Elements based on Lineal-Path Functions", In Report of the Workshop 1011 at the ``Mathematisches Forschungsinstitut Oberwolfach'' entitled ``Microstructures in Solids: From Quantum Models to Continua'', organized by A. Mielke and M. Ortiz.
BibTeX:
@inproceedings{BalSchBra:2010:ssr,
  author = {Balzani, D. and Schröder, J. and Brands, D.},
  title = {Statistically Similar Representative Volume Elements based on Lineal-Path Functions},
  booktitle = {Report of the Workshop 1011 at the ``Mathematisches Forschungsinstitut Oberwolfach'' entitled ``Microstructures in Solids: From Quantum Models to Continua'', organized by A. Mielke and M. Ortiz},
  year = {2010}
}
Schröder, J., Balzani, D. & Brands, D. (2010), "A FE$^2$-Homogenization Technique for Two-Phase Steels based on Statistically Similar Representative Volume Elements", In Proceedings of the International Symposium of Plasticity 2010. St. Kitts, St. Kitts und Nevis. Januar, 3-8 2010. Neat press.
BibTeX:
@inproceedings{SchBalBra:2010:afh,
  author = {Schröder, J. and Balzani, D. and Brands, D.},
  title = {A FE$^2$-Homogenization Technique for Two-Phase Steels based on Statistically Similar Representative Volume Elements},
  booktitle = {Proceedings of the International Symposium of Plasticity 2010},
  publisher = {Neat press},
  year = {2010}
}
Balzani, D., Brands, D., Schröder, J. & Carstensen, C. (2009), "Sensitivity analysis of statistical measures for the reconstruction of microstructures based on the minimization of generalized least--square functionals", Technische Mechanik. Vol. 30, pp. 297-315.
BibTeX:
@article{BalBraSchCar:2009:sao,
  author = {D. Balzani and D. Brands and J. Schröder and C. Carstensen},
  title = {Sensitivity analysis of statistical measures for the reconstruction of microstructures based on the minimization of generalized least--square functionals},
  journal = {Technische Mechanik},
  year = {2009},
  volume = {30},
  pages = {297--315}
}
Balzani, D., Schröder, J. & Brands, D. (2009), "Modeling of two-phase steels based on statistically similar microstructures", In Proceedings of the Conference on Computer Methods in Mechanics 2009. Zielona Gora, Poland.
BibTeX:
@inproceedings{BalSchBra:2009:mot,
  author = {D. Balzani and J. Schröder and D. Brands},
  title = {Modeling of two-phase steels based on statistically similar microstructures},
  booktitle = {Proceedings of the Conference on Computer Methods in Mechanics 2009},
  year = {2009}
}
Balzani, D., Schröder, J. & Brands, D. (2009), "Statistically similar RVEs for FE$^2$-simulations". Mathematisches Forschungsinstitut Oberwolfach, Technical Report Report No. 29/2009, 1604--1606, 2009.
BibTeX:
@techreport{BalSchBra:2009:ssr,
  author = {D. Balzani and J. Schröder and D. Brands},
  title = {Statistically similar RVEs for FE$^2$-simulations},
  year = {2009},
  number = {Report No. 29/2009, 1604--1606}
}
Balzani, D., Schröder, J., Brands, D. & Carstensen, C. (2009), "FE$^2$-simulations in elasto-plasticity using statistically similar reprensentative volume elements", Proceedings in Applied Mathematics and Mechanics. Vol. 9, pp. 39-42.
BibTeX:
@article{BalSchBraCar:2009:fsi,
  author = {D. Balzani and J. Schröder and D. Brands and C. Carstensen},
  title = {FE$^2$-simulations in elasto-plasticity using statistically similar reprensentative volume elements},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2009},
  volume = {9},
  pages = {39--42}
}
Brands, D., Schröder, J., Klawonn, A., Rheinbach, O., Böse, D. & Erbel, R. (2009), "Numerical simulation of aterial walls based on IVUS-data", Proceedings in Applied Mathematics and Mechanics. Vol. 9, pp. 75-78.
BibTeX:
@article{BraSchKlaRheBoeErb:2009:nso,
  author = {D. Brands and J. Schröder and A. Klawonn and O. Rheinbach and D. Böse and R. Erbel},
  title = {Numerical simulation of aterial walls based on IVUS-data},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2009},
  volume = {9},
  pages = {75--78}
}
Brands, D., Klawonn, A., Rheinbach, O. & Schröder, J. (2008), "Modelling and convergence in arterial wall simulations using a parallel FETI solution strategy", Computer Methods in Biomechanics and Biomedical Engineering. Vol. 11, pp. 569-583.
BibTeX:
@article{BraKlaRheSch:2008:mac,
  author = {D. Brands and A. Klawonn and O. Rheinbach and J. Schröder},
  title = {Modelling and convergence in arterial wall simulations using a parallel FETI solution strategy},
  journal = {Computer Methods in Biomechanics and Biomedical Engineering},
  year = {2008},
  volume = {11},
  pages = {569--583}
}
Brands, D., Klawonn, A., Rheinbach, O. & Schröder, J. (2008), "On the visualization of patient specific arterial geometries using the virtual histology", Proceedings in Applied Mathematics and Mechanics. Vol. 8, pp. 10169-10170.
BibTeX:
@article{BraKlaRheSch:2008:otv,
  author = {D. Brands and A. Klawonn and O. Rheinbach and J. Schröder},
  title = {On the visualization of patient specific arterial geometries using the virtual histology},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  year = {2008},
  volume = {8},
  pages = {10169--10170}
}
Balzani, D., Klawonn, A., Rheinbach, O., Schröder, J. & Brands, D. (2007), "Simulation of arterial walls using FETI domain decomposition methods", In Proceedings of the ECCOMAS Conference: Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering., pp. 104-105.
BibTeX:
@inproceedings{BalKlaRheSchBra:2007:soa,
  author = {D. Balzani and A. Klawonn and O. Rheinbach and J. Schröder and D. Brands},
  title = {Simulation of arterial walls using FETI domain decomposition methods},
  booktitle = {Proceedings of the ECCOMAS Conference: Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering},
  year = {2007},
  pages = {104--105}
}
Balzani, D., Schröder, J., Brands, D., Klawonn, A. & Rheinbach, O. (2007), "Computer simulation of damage in overstretched atherosclerotic arteries", In Proceedings of the III International Congress on Computational Bioengineering., pp. 209-214.
BibTeX:
@inproceedings{BalSchBraKlaRhe:2007:cso,
  author = {D. Balzani and J. Schröder and D. Brands and A. Klawonn and O. Rheinbach},
  title = {Computer simulation of damage in overstretched atherosclerotic arteries},
  booktitle = {Proceedings of the III International Congress on Computational Bioengineering},
  year = {2007},
  pages = {209--214}
}
Brands, D., Balzani, D., Klawonn, A., Rheinbach, O. & Schröder, J. (2007), "Aspects of modeling and large scale simulation of arterial walls", In ACME 2007 -- Computational Mechanics in the UK: 2007. Glasgow, Scotland, April, 2007.
BibTeX:
@conference{BraBalKlaRheSch:2007:aom,
  author = {D. Brands and D. Balzani and A. Klawonn and O. Rheinbach and J. Schröder},
  title = {Aspects of modeling and large scale simulation of arterial walls},
  booktitle = {ACME 2007 -- Computational Mechanics in the UK: 2007},
  year = {2007}
}
Brands, D., Balzani, D., Rheinbach, A.K.O. & Schröder, J. (2007), "Large scale simulation of arterial walls: mechanical modeling", In ICIAM--GAMM 2007. Zürich, Switzerland, Juli, 2007.
BibTeX:
@conference{BraBalKlaRheSch:2007:lss,
  author = {D. Brands and D. Balzani and A. Klawonn O. Rheinbach and J. Schröder},
  title = {Large scale simulation of arterial walls: mechanical modeling},
  booktitle = {ICIAM--GAMM 2007},
  year = {2007}
}
Brands, D., Balzani, D., Klawonn, A., Rheinbach, O. & Schröder, J. (2007), "Modeling and computational aspects of arterial walls", In COMPLAS 2007. Barcelona, Spain, September, 2007.
BibTeX:
@conference{BraBalKlaRheSch:2007:mac,
  author = {D. Brands and D. Balzani and A. Klawonn and O. Rheinbach and J. Schröder},
  title = {Modeling and computational aspects of arterial walls},
  booktitle = {COMPLAS 2007},
  year = {2007}
}
Rheinbach, O., Klawonn, A., Schröder, J., Balzani, D. & Brands, D. (2007), "Simulation of arterial walls: an algebraic interface to iterative substructuring", In Proceedings of the III International Congress on Computational Bioengineering., pp. 51-56.
BibTeX:
@inproceedings{RheKlaSchBalBra:2007:soa,
  author = {O. Rheinbach and A. Klawonn and J. Schröder and D. Balzani and D. Brands},
  title = {Simulation of arterial walls: an algebraic interface to iterative substructuring},
  booktitle = {Proceedings of the III International Congress on Computational Bioengineering},
  year = {2007},
  pages = {51--56}
}
Schröder, J., Klawonn, A., Balzani, D., Rheinbach, O. & Brands, D. (2007), "On mechanical modeling of arterial walls and parallel solution strategies", In Proceedings of the 2nd GAMM Seminar on Continuum Biomechanics., pp. 97-107.
BibTeX:
@inproceedings{SchKlaBalRheBra:2007:omm,
  author = {J. Schröder and A. Klawonn and D. Balzani and O. Rheinbach and D. Brands},
  title = {On mechanical modeling of arterial walls and parallel solution strategies},
  booktitle = {Proceedings of the 2nd GAMM Seminar on Continuum Biomechanics},
  year = {2007},
  pages = {97--107}
}
Brands, D. (2006), "Entwicklung eines Kugelgelenks für PKW-Fahrwerke mit einem hohen Verhältnis von Achslast zur Gelenkdimension". Fakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechanik, Universität Duisburg-Essen zusammen mit TRW Automotive GmbH, Düsseldorf, 2006.
BibTeX:
@techreport{Bra:2006:eek,
  author = {D. Brands},
  title = {Entwicklung eines Kugelgelenks für PKW-Fahrwerke mit einem hohen Verhältnis von Achslast zur Gelenkdimension},
  year = {2006}
}
Brands, D. (2005), "Modulares Fahrzeug in Matlab/Simulink". Fakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechatronik, Universität Duisburg-Essen zusammen mit TRW Automotive GmbH, Alfdorf, 2005.
BibTeX:
@techreport{Bra:2005:mfi,
  author = {D. Brands},
  title = {Modulares Fahrzeug in Matlab/Simulink},
  year = {2005}
}
Brands, D. (2004), "Durchführung einer Verfahrensstudie zum Scherbiegen von Rohren". Fakultät für Ingenieurwissenschaften, Abteilung für Maschinenbau, Institut für Mechatronik und Systemdynamik, Lehrstuhl für Mechanik, Universität Duisburg-Essen zusammen mit ThyssenKrupp Stahl AG, Duisburg, 2004.
BibTeX:
@techreport{Bra:2004:dev,
  author = {D. Brands},
  title = {Durchführung einer Verfahrensstudie zum Scherbiegen von Rohren},
  year = {2004}
}

Stand: 30.04.2019